STM32F301

Architecture

Architecture : ARM Cortex-M4 (CM4)

revision : r1p0

endian : little

Number of relevant bits in Interrupt priority : 3

Peripherals

name : ADC
description : Analog to digital converter
base address : 0x0
Interrupt (18) ADC1_IRQ : ADC1 interrupt

name : CAN
description : Controller area network
base address : 0x0
Interrupt (19) CAN_TX_IRQ : USB high priority/CAN_TX interrupt
Interrupt (20) CAN_RXD_IRQ : USB low priority/CAN_RXD interrupt
Interrupt (21) CAN_RXI_IRQ : CAN_RXI interrupt
Interrupt (22) CAN_SCE_IRQ : CAN_SCE interrupt

name : CEC
description : HDMI-CEC controller
base address : 0x0
Interrupt (42) CEC_IRQ : CEC interrupt

name : CRC
description : cyclic redundancy check calculation unit
base address : 0x0

name : DAC1
description : Digital-to-analog converter
base address : 0x0

name : DAC2
description : Digital-to-analog converter
base address : 0x0

name : DBGMCU
description : Debug support
base address : 0x0

name : DMA1
description : DMA controller 1
base address : 0x0
Interrupt (11) DMA1_CH1 : DMA1 channel 1 interrupt
Interrupt (12) DMA1_CH2 : DMA1 channel 2 interrupt
Interrupt (13) DMA1_CH3 : DMA1 channel 3 interrupt
Interrupt (14) DMA1_CH4 : DMA1 channel 4 interrupt
Interrupt (15) DMA1_CH5 : DMA1 channel 5 interrupt
Interrupt (16) DMA1_CH6 : DMA1 channel 6 interrupt
Interrupt (17) DMA1_CH7 : DMA1 Channel 7 interrupt

name : DMA2
description : DMA controller 1
base address : 0x0

name : EXTI
description : External interrupt/event controller
base address : 0x0
Interrupt (1) PVD_IRQ : Power voltage detector through EXTI line detection interrupt
Interrupt (2) TAMP : Tamper and timestamp through EXTI19 line
Interrupt (6) EXTI0_IRQ : EXTI Line 0 interrupt
Interrupt (7) EXTI1_IRQ : EXTI Line1 interrupt
Interrupt (8) EXTI2_RI_IRQ : EXTI Line 2 and routing interface interrupt
Interrupt (9) EXTI3_IRQ : EXTI Line1 interrupt
Interrupt (10) EXTI4_IRQ : EXTI Line4 interrupt
Interrupt (23) EXTI5_9_IRQ : EXTI Line[9:5] interrupts
Interrupt (40) EXTI15_10_IRQ : EXTI Line[15:10] interrupts
Interrupt (64) COMP2_IRQ : COMP2 interrupt combined with EXTI Lines
Interrupt (65) COMP4_6_IRQ : COMP4 & COMP6 interrupts combined with

name : Flash
description : Flash
base address : 0x0
Interrupt (4) FLASH : Flash global interrupt

name : FPU
description : Floting point unit
base address : 0x0
Interrupt (81) FPU : Floating point interrupt
Interrupt (81) FPU : Floating point interrupt

name : FPU_CPACR
description : Floating point unit CPACR
base address : 0x0

name : GPIOA
description : General-purpose I/Os
base address : 0x0

name : GPIOB
description : General-purpose I/Os
base address : 0x0

name : GPIOC
description : General-purpose I/Os
base address : 0x0

name : GPIOD
description : General-purpose I/Os
base address : 0x0

name : GPIOE
description : General-purpose I/Os
base address : 0x0

name : GPIOF
description : General-purpose I/Os
base address : 0x0

name : I2C1
description : Inter-integrated circuit
base address : 0x0
Interrupt (31) I2C1_EV_IRQ : I2C1_EV global interrupt/EXTI Line[3:2] interrupts
Interrupt (32) I2C1_ER_IRQ : I2C1_ER

name : I2C2
description : Inter-integrated circuit
base address : 0x0
Interrupt (33) I2C2_EV_IRQ : I2C2_EV global interrupt/EXTI Line[4:2] interrupts
Interrupt (34) I2C2_ER_IRQ : I2C2_ER

name : I2C3
description : Inter-integrated circuit
base address : 0x0
Interrupt (72) I2C3_EV_EXTI27_IRQ : I2C3 event interrupt & EXTI Line27 interrupt
Interrupt (73) I2C3_ER_IRQ : I2C3 error interrupt

name : I2S2ext
description : Serial peripheral interface/Inter-IC
sound
base address : 0x0

name : I2S3ext
description : Serial peripheral interface/Inter-IC
sound
base address : 0x0

name : IWDG
description : Independent watchdog
base address : 0x0

name : MPU
description : Memory protection unit
base address : 0x0

name : NVIC
description : Nested Vectored Interrupt Controller
base address : 0x0

name : NVIC_STIR
description : Nested vectored interrupt controller
base address : 0x0

name : PWR
description : Power control
base address : 0x0

name : RCC
description : Reset and clock control
base address : 0x0
Interrupt (5) RCC : RCC global interrupt

name : RTC
description : Real-time clock
base address : 0x0
Interrupt (3) RTC_WKUP_IRQ : RTC
Interrupt (41) RTC_ALARM_IT_IRQ : RTC alarm interrupt

name : SCB
description : System control block
base address : 0x0

name : SCB_ACTRL
description : System control block ACTLR
base address : 0x0

name : SDADC1
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (61) ADC_SD1_IRQ : ADC sigma delta 1 (SDADC1) global interrupt

name : SDADC2
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (62) ADC_SD2_IRQ : ADC sigma delta 2 (SDADC2) global interrupt

name : SDADC3
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (63) ADC_SD3_IRQ : ADC sigma delta 3 (SDADC3) global interrupt

name : SPI1
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
Interrupt (35) SPI1_IRQ : SPI1 global interrupt

name : SPI2
description : Serial peripheral interface/Inter-IC
sound
base address : 0x0
Interrupt (36) SPI2_IRQ : SPI2 global interrupt

name : SPI3
description : Serial peripheral interface/Inter-IC
sound
base address : 0x0
Interrupt (51) SPI3_IRQ : SPI3 global interrupt

name : STK
description : SysTick timer
base address : 0x0

name : SYSCFG_COMP_OPAMP
description : System configuration controller
base address : 0x0

name : TIM1
description : Advanced-timers
base address : 0x0

name : TIM12
description : General purpose timers
base address : 0x0
Interrupt (43) TIM12_IRQ : Timer 12 global interrupt

name : TIM13
description : General purpose timers
base address : 0x0
Interrupt (44) TIM13_IRQ : Timer 13 global interrupt

name : TIM14
description : General purpose timers
base address : 0x0
Interrupt (45) TIM14_IRQ : Timer 14 global interrupt

name : TIM15
description : General purpose timers
base address : 0x0
Interrupt (24) TIM15_IRQ : Timer 15 global interrupt

name : TIM16
description : General-purpose-timers
base address : 0x0
Interrupt (25) TIM16_IRQ : Timer 16 global interrupt

name : TIM17
description : General-purpose-timers
base address : 0x0
Interrupt (26) TIM17_IRQ : Timer 17 global interrupt

name : TIM18
description : Basic timers
base address : 0x0
Interrupt (27) TIM18_DAC3_IRQ : Timer 18 global interrupt/DAC3 underrun interrupt

name : TIM19
description : General purpose timer
base address : 0x0
Interrupt (78) TIM19_IRQ : Timer 19 global interrupt

name : TIM2
description : General purpose timer
base address : 0x0
Interrupt (28) TIM2 : Timer 2 global interrupt

name : TIM3
description : General purpose timer
base address : 0x0
Interrupt (29) TIM3_IRQ : Timer 3 global interrupt

name : TIM4
description : General purpose timer
base address : 0x0
Interrupt (30) TIM4_IRQ : Timer 4 global interrupt

name : TIM5
description : General purpose timer
base address : 0x0
Interrupt (50) TIM5_IRQ : Timer 5 global interrupt

name : TIM6
description : Basic timers
base address : 0x0
Interrupt (54) TIM6_DAC1 : TIM6 global, DAC1 Cahnnel1 and Cahnnel2 underrun error Interrupts

name : TIM7
description : Basic timers
base address : 0x0
Interrupt (55) TIM7_IRQ : Timer 7 global interrupt

name : TSC
description : Touch sensing controller
base address : 0x0

name : USART1
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (37) USART1_IRQ : USART1 global interrupt/EXTI25 (USART1 wakeup event)

name : USART2
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (38) USART2_IRQ : USART2 global interrupt/EXTI26 (USART1 wakeup event)

name : USART3
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (39) USART3_IRQ : USART3 global interrupt/EXTI28 (USART1 wakeup event)

name : USB
description : Universal serial bus full-speed device interface
base address : 0x0
Interrupt (74) USB_HP_IRQ : USB high priority interrupt
Interrupt (75) USB_LP_IRQ : USB low priority interrupt
Interrupt (76) USB_WAKEUP_IRQ : USB wakeup interrupt

name : WWDG
description : Window watchdog
base address : 0x0
Interrupt (0) WWDG_IRQ : Window Watchdog interrupt


Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.