\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection :
Control A
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWRST : Software Reset
bits : 0 - 0 (1 bit)
ENABLE : Enable
bits : 1 - 1 (1 bit)
RUNSTDBY : Run in Standby
bits : 2 - 2 (1 bit)
Control B
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EOEN : External Output Enable
bits : 0 - 0 (1 bit)
IOEN : Internal Output Enable
bits : 1 - 1 (1 bit)
LEFTADJ : Left Adjusted Data
bits : 2 - 2 (1 bit)
VPD : Voltage Pump Disable
bits : 3 - 3 (1 bit)
BDWP : Bypass DATABUF Write Protection
bits : 4 - 4 (1 bit)
REFSEL : Reference Selection
bits : 6 - 7 (2 bit)
Enumeration: REFSELSelect
0x0 : INT1V
Internal 1.0V reference
0x1 : AVCC
AVCC
0x2 : VREFP
External reference
End of enumeration elements list.
Event Control
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
STARTEI : Start Conversion Event Input
bits : 0 - 0 (1 bit)
EMPTYEO : Data Buffer Empty Event Output
bits : 1 - 1 (1 bit)
Interrupt Enable Clear
address_offset : 0x4 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
UNDERRUN : Underrun Interrupt Enable
bits : 0 - 0 (1 bit)
EMPTY : Data Buffer Empty Interrupt Enable
bits : 1 - 1 (1 bit)
SYNCRDY : Synchronization Ready Interrupt Enable
bits : 2 - 2 (1 bit)
Interrupt Enable Set
address_offset : 0x5 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
UNDERRUN : Underrun Interrupt Enable
bits : 0 - 0 (1 bit)
EMPTY : Data Buffer Empty Interrupt Enable
bits : 1 - 1 (1 bit)
SYNCRDY : Synchronization Ready Interrupt Enable
bits : 2 - 2 (1 bit)
Interrupt Flag Status and Clear
address_offset : 0x6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
UNDERRUN : Underrun
bits : 0 - 0 (1 bit)
EMPTY : Data Buffer Empty
bits : 1 - 1 (1 bit)
SYNCRDY : Synchronization Ready
bits : 2 - 2 (1 bit)
Status
address_offset : 0x7 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SYNCBUSY : Synchronization Busy Status
bits : 7 - 7 (1 bit)
access : read-only
Data
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : Data value to be converted
bits : 0 - 15 (16 bit)
Data Buffer
address_offset : 0xC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATABUF : Data Buffer
bits : 0 - 15 (16 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.