\n

RTT

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection : not protected

Registers

MR

AR

VR

SR


MR

Mode Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

MR MR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RTPRES ALMIEN RTTINCIEN RTTRST RTTDIS RTC1HZ

RTPRES : Real-time Timer Prescaler Value
bits : 0 - 15 (16 bit)

ALMIEN : Alarm Interrupt Enable
bits : 16 - 16 (1 bit)

RTTINCIEN : Real-time Timer Increment Interrupt Enable
bits : 17 - 17 (1 bit)

RTTRST : Real-time Timer Restart
bits : 18 - 18 (1 bit)

RTTDIS : Real-time Timer Disable
bits : 20 - 20 (1 bit)

RTC1HZ : Real-Time Clock 1Hz Clock Selection
bits : 24 - 24 (1 bit)


AR

Alarm Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

AR AR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALMV

ALMV : Alarm Value
bits : 0 - 31 (32 bit)


VR

Value Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

VR VR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CRTV

CRTV : Current Real-time Value
bits : 0 - 31 (32 bit)


SR

Status Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

SR SR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALMS RTTINC

ALMS : Real-time Alarm Status (cleared on read)
bits : 0 - 0 (1 bit)

RTTINC : Prescaler Roll-over Status (cleared on read)
bits : 1 - 1 (1 bit)



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.