\n
address_offset : 0x0 Bytes (0x0)
size : 0xD04 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x0 Bytes (0x0)
size : 0xC04 byte (0x0)
mem_usage : registers
protection : not protected
Priority Registers Slave
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0 : Master 0 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M1 : Master 1 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M2 : Master 2 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M4 : Master 4 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 16 - 18 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M5 : Master 5 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
Priority Registers Slave
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0 : Master 0 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M1 : Master 1 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M2 : Master 2 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M4 : Master 4 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 16 - 18 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M5 : Master 5 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
Control Register
address_offset : 0x130 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PARK : Park
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
Park on master port M0
#001 : 001
Park on master port M1
#010 : 010
Park on master port M2
#011 : 011
Park on master port M3
#100 : 100
Park on master port M4
#101 : 101
Park on master port M5
#110 : 110
Park on master port M6
#111 : 111
Park on master port M7
End of enumeration elements list.
PCTL : Parking Control
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
#00 : 00
When no master makes a request, the arbiter parks the slave port on the master port defined by the PARK field
#01 : 01
When no master makes a request, the arbiter parks the slave port on the last master to be in control of the slave port
#10 : 10
When no master makes a request, the slave port is not parked on a master and the arbiter drives all outputs to a constant safe state
End of enumeration elements list.
ARB : Arbitration Mode
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
Fixed priority
#01 : 01
Round-robin, or rotating, priority
End of enumeration elements list.
HLP : Halt Low Priority
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
The low power mode request has the highest priority for arbitration on this slave port
#1 : 1
The low power mode request has the lowest initial priority for arbitration on this slave port
End of enumeration elements list.
RO : Read Only
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
The slave port's registers are writeable
#1 : 1
The slave port's registers are read-only and cannot be written. Attempted writes have no effect on the registers and result in a bus error response.
End of enumeration elements list.
Control Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PARK : Park
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
Park on master port M0
#001 : 001
Park on master port M1
#010 : 010
Park on master port M2
#011 : 011
Park on master port M3
#100 : 100
Park on master port M4
#101 : 101
Park on master port M5
#110 : 110
Park on master port M6
#111 : 111
Park on master port M7
End of enumeration elements list.
PCTL : Parking Control
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
#00 : 00
When no master makes a request, the arbiter parks the slave port on the master port defined by the PARK field
#01 : 01
When no master makes a request, the arbiter parks the slave port on the last master to be in control of the slave port
#10 : 10
When no master makes a request, the slave port is not parked on a master and the arbiter drives all outputs to a constant safe state
End of enumeration elements list.
ARB : Arbitration Mode
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
Fixed priority
#01 : 01
Round-robin, or rotating, priority
End of enumeration elements list.
HLP : Halt Low Priority
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
The low power mode request has the highest priority for arbitration on this slave port
#1 : 1
The low power mode request has the lowest initial priority for arbitration on this slave port
End of enumeration elements list.
RO : Read Only
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
The slave port's registers are writeable
#1 : 1
The slave port's registers are read-only and cannot be written. Attempted writes have no effect on the registers and result in a bus error response.
End of enumeration elements list.
Priority Registers Slave
address_offset : 0x300 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0 : Master 0 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M1 : Master 1 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M2 : Master 2 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M4 : Master 4 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 16 - 18 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M5 : Master 5 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
Control Register
address_offset : 0x340 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PARK : Park
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
Park on master port M0
#001 : 001
Park on master port M1
#010 : 010
Park on master port M2
#011 : 011
Park on master port M3
#100 : 100
Park on master port M4
#101 : 101
Park on master port M5
#110 : 110
Park on master port M6
#111 : 111
Park on master port M7
End of enumeration elements list.
PCTL : Parking Control
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
#00 : 00
When no master makes a request, the arbiter parks the slave port on the master port defined by the PARK field
#01 : 01
When no master makes a request, the arbiter parks the slave port on the last master to be in control of the slave port
#10 : 10
When no master makes a request, the slave port is not parked on a master and the arbiter drives all outputs to a constant safe state
End of enumeration elements list.
ARB : Arbitration Mode
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
Fixed priority
#01 : 01
Round-robin, or rotating, priority
End of enumeration elements list.
HLP : Halt Low Priority
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
The low power mode request has the highest priority for arbitration on this slave port
#1 : 1
The low power mode request has the lowest initial priority for arbitration on this slave port
End of enumeration elements list.
RO : Read Only
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
The slave port's registers are writeable
#1 : 1
The slave port's registers are read-only and cannot be written. Attempted writes have no effect on the registers and result in a bus error response.
End of enumeration elements list.
Priority Registers Slave
address_offset : 0x600 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0 : Master 0 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M1 : Master 1 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M2 : Master 2 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M4 : Master 4 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 16 - 18 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M5 : Master 5 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
Control Register
address_offset : 0x650 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PARK : Park
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
Park on master port M0
#001 : 001
Park on master port M1
#010 : 010
Park on master port M2
#011 : 011
Park on master port M3
#100 : 100
Park on master port M4
#101 : 101
Park on master port M5
#110 : 110
Park on master port M6
#111 : 111
Park on master port M7
End of enumeration elements list.
PCTL : Parking Control
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
#00 : 00
When no master makes a request, the arbiter parks the slave port on the master port defined by the PARK field
#01 : 01
When no master makes a request, the arbiter parks the slave port on the last master to be in control of the slave port
#10 : 10
When no master makes a request, the slave port is not parked on a master and the arbiter drives all outputs to a constant safe state
End of enumeration elements list.
ARB : Arbitration Mode
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
Fixed priority
#01 : 01
Round-robin, or rotating, priority
End of enumeration elements list.
HLP : Halt Low Priority
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
The low power mode request has the highest priority for arbitration on this slave port
#1 : 1
The low power mode request has the lowest initial priority for arbitration on this slave port
End of enumeration elements list.
RO : Read Only
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
The slave port's registers are writeable
#1 : 1
The slave port's registers are read-only and cannot be written. Attempted writes have no effect on the registers and result in a bus error response.
End of enumeration elements list.
Master General Purpose Control Register
address_offset : 0x800 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AULB : Arbitrates On Undefined Length Bursts
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
No arbitration is allowed during an undefined length burst
#001 : 001
Arbitration is allowed at any time during an undefined length burst
#010 : 010
Arbitration is allowed after four beats of an undefined length burst
#011 : 011
Arbitration is allowed after eight beats of an undefined length burst
#100 : 100
Arbitration is allowed after 16 beats of an undefined length burst
End of enumeration elements list.
Master General Purpose Control Register
address_offset : 0x900 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AULB : Arbitrates On Undefined Length Bursts
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
No arbitration is allowed during an undefined length burst
#001 : 001
Arbitration is allowed at any time during an undefined length burst
#010 : 010
Arbitration is allowed after four beats of an undefined length burst
#011 : 011
Arbitration is allowed after eight beats of an undefined length burst
#100 : 100
Arbitration is allowed after 16 beats of an undefined length burst
End of enumeration elements list.
Priority Registers Slave
address_offset : 0xA00 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0 : Master 0 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M1 : Master 1 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M2 : Master 2 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M4 : Master 4 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 16 - 18 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
M5 : Master 5 Priority. Sets the arbitration priority for this port on the associated slave port.
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
#000 : 000
This master has level 1, or highest, priority when accessing the slave port.
#001 : 001
This master has level 2 priority when accessing the slave port.
#010 : 010
This master has level 3 priority when accessing the slave port.
#011 : 011
This master has level 4 priority when accessing the slave port.
#100 : 100
This master has level 5 priority when accessing the slave port.
#101 : 101
This master has level 6 priority when accessing the slave port.
#110 : 110
This master has level 7 priority when accessing the slave port.
#111 : 111
This master has level 8, or lowest, priority when accessing the slave port.
End of enumeration elements list.
Master General Purpose Control Register
address_offset : 0xA00 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AULB : Arbitrates On Undefined Length Bursts
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
No arbitration is allowed during an undefined length burst
#001 : 001
Arbitration is allowed at any time during an undefined length burst
#010 : 010
Arbitration is allowed after four beats of an undefined length burst
#011 : 011
Arbitration is allowed after eight beats of an undefined length burst
#100 : 100
Arbitration is allowed after 16 beats of an undefined length burst
End of enumeration elements list.
Control Register
address_offset : 0xA60 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PARK : Park
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
Park on master port M0
#001 : 001
Park on master port M1
#010 : 010
Park on master port M2
#011 : 011
Park on master port M3
#100 : 100
Park on master port M4
#101 : 101
Park on master port M5
#110 : 110
Park on master port M6
#111 : 111
Park on master port M7
End of enumeration elements list.
PCTL : Parking Control
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
#00 : 00
When no master makes a request, the arbiter parks the slave port on the master port defined by the PARK field
#01 : 01
When no master makes a request, the arbiter parks the slave port on the last master to be in control of the slave port
#10 : 10
When no master makes a request, the slave port is not parked on a master and the arbiter drives all outputs to a constant safe state
End of enumeration elements list.
ARB : Arbitration Mode
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
Fixed priority
#01 : 01
Round-robin, or rotating, priority
End of enumeration elements list.
HLP : Halt Low Priority
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
The low power mode request has the highest priority for arbitration on this slave port
#1 : 1
The low power mode request has the lowest initial priority for arbitration on this slave port
End of enumeration elements list.
RO : Read Only
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
The slave port's registers are writeable
#1 : 1
The slave port's registers are read-only and cannot be written. Attempted writes have no effect on the registers and result in a bus error response.
End of enumeration elements list.
Master General Purpose Control Register
address_offset : 0xC00 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AULB : Arbitrates On Undefined Length Bursts
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
No arbitration is allowed during an undefined length burst
#001 : 001
Arbitration is allowed at any time during an undefined length burst
#010 : 010
Arbitration is allowed after four beats of an undefined length burst
#011 : 011
Arbitration is allowed after eight beats of an undefined length burst
#100 : 100
Arbitration is allowed after 16 beats of an undefined length burst
End of enumeration elements list.
Master General Purpose Control Register
address_offset : 0xD00 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AULB : Arbitrates On Undefined Length Bursts
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
No arbitration is allowed during an undefined length burst
#001 : 001
Arbitration is allowed at any time during an undefined length burst
#010 : 010
Arbitration is allowed after four beats of an undefined length burst
#011 : 011
Arbitration is allowed after eight beats of an undefined length burst
#100 : 100
Arbitration is allowed after 16 beats of an undefined length burst
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.