\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection : not protected
Backdoor Comparison Key 3.
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 3.
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 2.
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 2.
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 1.
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 1.
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 0.
address_offset : 0x3 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 0.
address_offset : 0x3 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 7.
address_offset : 0x4 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 7.
address_offset : 0x4 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 6.
address_offset : 0x5 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 6.
address_offset : 0x5 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 5.
address_offset : 0x6 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 5.
address_offset : 0x6 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 4.
address_offset : 0x7 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 4.
address_offset : 0x7 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 1 - Low Register
address_offset : 0x8 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 1 - Low Register
address_offset : 0x8 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 1 - High Register
address_offset : 0x9 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 1 - High Register
address_offset : 0x9 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 0 - Low Register
address_offset : 0xA Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 0 - Low Register
address_offset : 0xA Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 0 - High Register
address_offset : 0xB Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection 0 - High Register
address_offset : 0xB Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROT : P-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile Flash Security Register
address_offset : 0xC Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SEC : Flash Security
bits : 0 - 1 (2 bit)
access : read-only
Enumeration:
#10 : 10
MCU security status is unsecure
#11 : 11
MCU security status is secure
End of enumeration elements list.
FSLACC : Freescale Failure Analysis Access Code
bits : 2 - 3 (2 bit)
access : read-only
Enumeration:
#10 : 10
Freescale factory access denied
#11 : 11
Freescale factory access granted
End of enumeration elements list.
MEEN : no description available
bits : 4 - 5 (2 bit)
access : read-only
Enumeration:
#10 : 10
Mass erase is disabled
#11 : 11
Mass erase is enabled
End of enumeration elements list.
KEYEN : Backdoor Key Security Enable
bits : 6 - 7 (2 bit)
access : read-only
Enumeration:
#10 : 10
Backdoor key access enabled
#11 : 11
Backdoor key access disabled
End of enumeration elements list.
Non-volatile Flash Security Register
address_offset : 0xC Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SEC : Flash Security
bits : 0 - 1 (2 bit)
access : read-only
Enumeration:
#10 : 10
MCU security status is unsecure
#11 : 11
MCU security status is secure
End of enumeration elements list.
FSLACC : Freescale Failure Analysis Access Code
bits : 2 - 3 (2 bit)
access : read-only
Enumeration:
#10 : 10
Freescale factory access denied
#11 : 11
Freescale factory access granted
End of enumeration elements list.
MEEN : no description available
bits : 4 - 5 (2 bit)
access : read-only
Enumeration:
#10 : 10
Mass erase is disabled
#11 : 11
Mass erase is enabled
End of enumeration elements list.
KEYEN : Backdoor Key Security Enable
bits : 6 - 7 (2 bit)
access : read-only
Enumeration:
#10 : 10
Backdoor key access enabled
#11 : 11
Backdoor key access disabled
End of enumeration elements list.
Non-volatile Flash Option Register
address_offset : 0xD Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LPBOOT : no description available
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 00
Low-power boot
#1 : 01
Normal boot
End of enumeration elements list.
EZPORT_DIS : no description available
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
#0 : 00
EzPort operation is disabled
#1 : 01
EzPort operation is enabled
End of enumeration elements list.
NMI_DIS : no description available
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
#0 : 00
NMI interrupts are always blocked
#1 : 01
NMI_b pin/interrupts reset default to enabled
End of enumeration elements list.
Non-volatile Flash Option Register
address_offset : 0xD Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LPBOOT : no description available
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 00
Low-power boot
#1 : 01
Normal boot
End of enumeration elements list.
EZPORT_DIS : no description available
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
#0 : 00
EzPort operation is disabled
#1 : 01
EzPort operation is enabled
End of enumeration elements list.
NMI_DIS : no description available
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
#0 : 00
NMI interrupts are always blocked
#1 : 01
NMI_b pin/interrupts reset default to enabled
End of enumeration elements list.
Non-volatile EERAM Protection Register
address_offset : 0xE Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EPROT : no description available
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile EERAM Protection Register
address_offset : 0xE Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EPROT : no description available
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile D-Flash Protection Register
address_offset : 0xF Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DPROT : D-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile D-Flash Protection Register
address_offset : 0xF Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DPROT : D-Flash Region Protect
bits : 0 - 7 (8 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.