\n
address_offset : 0x0 Bytes (0x0)
size : 0x840 byte (0x0)
mem_usage : registers
protection : not protected
Control/Error Status Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid (global enable/disable for the MPU)
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
MPU is disabled. All accesses from all bus masters are allowed.
#1 : 1
MPU is enabled
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 7 (7 bit)
access : read-only
NRGD : Number of region descriptors
bits : 8 - 11 (4 bit)
access : read-only
Enumeration:
#0000 : 0000
8 region descriptors
#0001 : 0001
12 region descriptors
#0010 : 0010
16 region descriptors
End of enumeration elements list.
NSP : Number of slave ports
bits : 12 - 15 (4 bit)
access : read-only
HRL : Hardware revision level
bits : 16 - 19 (4 bit)
access : read-only
RESERVED : no description available
bits : 20 - 22 (3 bit)
access : read-only
RESERVED : no description available
bits : 20 - 22 (3 bit)
access : read-only
SPERR : Slave port n error
bits : 24 - 31 (8 bit)
access : read-write
Enumeration:
#0 : 0
No error has occurred for slave port n.
#1 : 1
An error has occurred for slave port n.
End of enumeration elements list.
Region Descriptor Alternate Access Control n
address_offset : 0x1000 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x1030 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x1040 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x1050 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x1060 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor n, Word 0
address_offset : 0x1460 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x1474 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x1488 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x149C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x1804 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x18A0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x18B8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x18D0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x18E8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor n, Word 0
address_offset : 0x1CF0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x1D0C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x1D28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x1D44 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Error Address Register, Slave Port n
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EADDR : Error address
bits : 0 - 31 (32 bit)
access : read-only
Region Descriptor Alternate Access Control n
address_offset : 0x200C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x2150 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x2170 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x2190 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x21B0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor n, Word 0
address_offset : 0x25C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x25E4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x2608 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x262C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Error Detail Register, Slave Port n
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERW : Error read/write
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Read
#1 : 1
Write
End of enumeration elements list.
EATTR : Error attributes
bits : 1 - 3 (3 bit)
access : read-only
Enumeration:
#000 : 000
User mode, instruction access
#001 : 001
User mode, data access
#010 : 010
Supervisor mode, instruction access
#011 : 011
Supervisor mode, data access
End of enumeration elements list.
EMN : Error master number
bits : 4 - 7 (4 bit)
access : read-only
EPID : Error process identification
bits : 8 - 15 (8 bit)
access : read-only
EACD : Error access control detail
bits : 16 - 31 (16 bit)
access : read-only
Region Descriptor Alternate Access Control n
address_offset : 0x2818 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x2A40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x2A68 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x2A90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x2AB8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor n, Word 0
address_offset : 0x2ED0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x2EFC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x2F28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x2F54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x3028 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x3370 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x33A0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x33D0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x3400 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Error Address Register, Slave Port n
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EADDR : Error address
bits : 0 - 31 (32 bit)
access : read-only
Region Descriptor n, Word 0
address_offset : 0x3820 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x383C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 1
address_offset : 0x3854 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x3888 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x38BC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor n, Word 0
address_offset : 0x3CE0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x3D18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x3D50 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x3D88 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x4054 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x41B0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x41EC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x4228 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x4264 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Error Detail Register, Slave Port n
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERW : Error read/write
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Read
#1 : 1
Write
End of enumeration elements list.
EATTR : Error attributes
bits : 1 - 3 (3 bit)
access : read-only
Enumeration:
#000 : 000
User mode, instruction access
#001 : 001
User mode, data access
#010 : 010
Supervisor mode, instruction access
#011 : 011
Supervisor mode, data access
End of enumeration elements list.
EMN : Error master number
bits : 4 - 7 (4 bit)
access : read-only
EPID : Error process identification
bits : 8 - 15 (8 bit)
access : read-only
EACD : Error access control detail
bits : 16 - 31 (16 bit)
access : read-only
Region Descriptor n, Word 0
address_offset : 0x4690 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x46D0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x4710 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x4750 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x4870 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 0
address_offset : 0x4B80 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x4BC4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x4C08 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x4C4C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x5090 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Error Address Register, Slave Port n
address_offset : 0x58 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EADDR : Error address
bits : 0 - 31 (32 bit)
access : read-only
Region Descriptor Alternate Access Control n
address_offset : 0x58B4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor Alternate Access Control n
address_offset : 0x60DC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Error Detail Register, Slave Port n
address_offset : 0x68 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERW : Error read/write
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Read
#1 : 1
Write
End of enumeration elements list.
EATTR : Error attributes
bits : 1 - 3 (3 bit)
access : read-only
Enumeration:
#000 : 000
User mode, instruction access
#001 : 001
User mode, data access
#010 : 010
Supervisor mode, instruction access
#011 : 011
Supervisor mode, data access
End of enumeration elements list.
EMN : Error master number
bits : 4 - 7 (4 bit)
access : read-only
EPID : Error process identification
bits : 8 - 15 (8 bit)
access : read-only
EACD : Error access control detail
bits : 16 - 31 (16 bit)
access : read-only
Region Descriptor Alternate Access Control n
address_offset : 0x6908 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor Alternate Access Control n
address_offset : 0x7138 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor Alternate Access Control n
address_offset : 0x796C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Error Address Register, Slave Port n
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EADDR : Error address
bits : 0 - 31 (32 bit)
access : read-only
Region Descriptor n, Word 0
address_offset : 0x800 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0x808 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0x810 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0x818 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Region Descriptor Alternate Access Control n
address_offset : 0x81A4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor Alternate Access Control n
address_offset : 0x89E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn.RGDAAC) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Error Detail Register, Slave Port n
address_offset : 0x94 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERW : Error read/write
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Read
#1 : 1
Write
End of enumeration elements list.
EATTR : Error attributes
bits : 1 - 3 (3 bit)
access : read-only
Enumeration:
#000 : 000
User mode, instruction access
#001 : 001
User mode, data access
#010 : 010
Supervisor mode, instruction access
#011 : 011
Supervisor mode, data access
End of enumeration elements list.
EMN : Error master number
bits : 4 - 7 (4 bit)
access : read-only
EPID : Error process identification
bits : 8 - 15 (8 bit)
access : read-only
EACD : Error access control detail
bits : 16 - 31 (16 bit)
access : read-only
Error Address Register, Slave Port n
address_offset : 0xB0 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
EADDR : Error address
bits : 0 - 31 (32 bit)
access : read-only
Region Descriptor n, Word 0
address_offset : 0xC10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
SRTADDR : Start address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 1
address_offset : 0xC1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 4 (5 bit)
access : read-only
ENDADDR : End address
bits : 5 - 31 (27 bit)
access : read-write
Region Descriptor n, Word 2
address_offset : 0xC28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
M0UM : Bus master 0 user mode access control
bits : 0 - 2 (3 bit)
access : read-write
M0SM : Bus master 0 supervisor mode access control
bits : 3 - 4 (2 bit)
access : read-write
M0PE : Bus master 0 process identifier enable
bits : 5 - 5 (1 bit)
access : read-write
M1UM : Bus master 1 user mode access control
bits : 6 - 8 (3 bit)
access : read-write
M1SM : Bus master 1 supervisor mode access control
bits : 9 - 10 (2 bit)
access : read-write
M1PE : Bus master 1 process identifier enable
bits : 11 - 11 (1 bit)
access : read-write
M2UM : Bus master 2 user mode access control
bits : 12 - 14 (3 bit)
access : read-write
M2SM : Bus master 2 supervisor mode access control
bits : 15 - 16 (2 bit)
access : read-write
M2PE : Bus master 2 process identifier enable
bits : 17 - 17 (1 bit)
access : read-write
M3UM : Bus master 3 user mode access control
bits : 18 - 20 (3 bit)
access : read-write
Enumeration:
#0 : 0
An attempted access of that mode may be terminated with an access error (if not allowed by another descriptor) and the access not performed.
#1 : 1
Allows the given access type to occur
End of enumeration elements list.
M3SM : Bus master 3 supervisor mode access control
bits : 21 - 22 (2 bit)
access : read-write
Enumeration:
#00 : 00
r/w/x; read, write and execute allowed
#01 : 01
r/x; read and execute allowed, but no write
#10 : 10
r/w; read and write allowed, but no execute
#11 : 11
Same as user mode defined in M3UM
End of enumeration elements list.
M3PE : Bus master 3 process identifier enable.
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Do not include the process identifier in the evaluation
#1 : 1
Include the process identifier and mask (RGDn_WORD3) in the region hit evaluation
End of enumeration elements list.
M4WE : Bus master 4 write enable
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 4 writes allowed
End of enumeration elements list.
M4RE : Bus master 4 read enable.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 4 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 4 reads allowed
End of enumeration elements list.
M5WE : Bus master 5 write enable
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 5 writes allowed
End of enumeration elements list.
M5RE : Bus master 5 read enable.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 5 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 5 reads allowed
End of enumeration elements list.
M6WE : Bus master 6 write enable
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 6 writes allowed
End of enumeration elements list.
M6RE : Bus master 6 read enable.
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 6 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 6 reads allowed
End of enumeration elements list.
M7WE : Bus master 7 write enable
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 writes terminate with an access error and the write is not performed
#1 : 1
Bus master 7 writes allowed
End of enumeration elements list.
M7RE : Bus master 7 read enable.
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Bus master 7 reads terminate with an access error and the read is not performed
#1 : 1
Bus master 7 reads allowed
End of enumeration elements list.
Region Descriptor n, Word 3
address_offset : 0xC34 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VLD : Valid
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Region descriptor is invalid
#1 : 1
Region descriptor is valid
End of enumeration elements list.
RESERVED : no description available
bits : 1 - 15 (15 bit)
access : read-only
PIDMASK : Process identifier mask
bits : 16 - 23 (8 bit)
access : read-write
PID : Process identifier
bits : 24 - 31 (8 bit)
access : read-write
Error Detail Register, Slave Port n
address_offset : 0xC8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERW : Error read/write
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Read
#1 : 1
Write
End of enumeration elements list.
EATTR : Error attributes
bits : 1 - 3 (3 bit)
access : read-only
Enumeration:
#000 : 000
User mode, instruction access
#001 : 001
User mode, data access
#010 : 010
Supervisor mode, instruction access
#011 : 011
Supervisor mode, data access
End of enumeration elements list.
EMN : Error master number
bits : 4 - 7 (4 bit)
access : read-only
EPID : Error process identification
bits : 8 - 15 (8 bit)
access : read-only
EACD : Error access control detail
bits : 16 - 31 (16 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.