\n

GPIO

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x18 byte (0x0)
mem_usage : registers
protection : not protected

Registers

PDOR

PDIR

PDDR

PSOR

PCOR

PTOR


PDOR

Port Data Output Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

PDOR PDOR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PDO PDO0 PDO1 PDO2 PDO3 PDO4 PDO5 PDO6 PDO7 PDO8 PDO9 PDO10 PDO11 PDO12 PDO13 PDO14 PDO15 PDO16 PDO17 PDO18 PDO19 PDO20 PDO21 PDO22 PDO23 PDO24 PDO25 PDO26 PDO27 PDO28 PDO29 PDO30 PDO31

PDO : Port Data Output
bits : 0 - 31 (32 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO0 : Port Data Output
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO1 : Port Data Output
bits : 1 - 1 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO2 : Port Data Output
bits : 2 - 2 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO3 : Port Data Output
bits : 3 - 3 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO4 : Port Data Output
bits : 4 - 4 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO5 : Port Data Output
bits : 5 - 5 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO6 : Port Data Output
bits : 6 - 6 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO7 : Port Data Output
bits : 7 - 7 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO8 : Port Data Output
bits : 8 - 8 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO9 : Port Data Output
bits : 9 - 9 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO10 : Port Data Output
bits : 10 - 10 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO11 : Port Data Output
bits : 11 - 11 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO12 : Port Data Output
bits : 12 - 12 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO13 : Port Data Output
bits : 13 - 13 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO14 : Port Data Output
bits : 14 - 14 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO15 : Port Data Output
bits : 15 - 15 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO16 : Port Data Output
bits : 16 - 16 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO17 : Port Data Output
bits : 17 - 17 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO18 : Port Data Output
bits : 18 - 18 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO19 : Port Data Output
bits : 19 - 19 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO20 : Port Data Output
bits : 20 - 20 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO21 : Port Data Output
bits : 21 - 21 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO22 : Port Data Output
bits : 22 - 22 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO23 : Port Data Output
bits : 23 - 23 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO24 : Port Data Output
bits : 24 - 24 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO25 : Port Data Output
bits : 25 - 25 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO26 : Port Data Output
bits : 26 - 26 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO27 : Port Data Output
bits : 27 - 27 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO28 : Port Data Output
bits : 28 - 28 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO29 : Port Data Output
bits : 29 - 29 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO30 : Port Data Output
bits : 30 - 30 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.

PDO31 : Port Data Output
bits : 31 - 31 (1 bit)
access : read-write

Enumeration:

#0 : 0

Logic level 0 is driven on pin, provided pin is configured for general-purpose output.

#1 : 1

Logic level 1 is driven on pin, provided pin is configured for general-purpose output.

End of enumeration elements list.


PDIR

Port Data Input Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

PDIR PDIR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PDI PDI0 PDI1 PDI2 PDI3 PDI4 PDI5 PDI6 PDI7 PDI8 PDI9 PDI10 PDI11 PDI12 PDI13 PDI14 PDI15 PDI16 PDI17 PDI18 PDI19 PDI20 PDI21 PDI22 PDI23 PDI24 PDI25 PDI26 PDI27 PDI28 PDI29 PDI30 PDI31

PDI : Port Data Input
bits : 0 - 31 (32 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI0 : Port Data Input
bits : 0 - 0 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI1 : Port Data Input
bits : 1 - 1 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI2 : Port Data Input
bits : 2 - 2 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI3 : Port Data Input
bits : 3 - 3 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI4 : Port Data Input
bits : 4 - 4 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI5 : Port Data Input
bits : 5 - 5 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI6 : Port Data Input
bits : 6 - 6 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI7 : Port Data Input
bits : 7 - 7 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI8 : Port Data Input
bits : 8 - 8 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI9 : Port Data Input
bits : 9 - 9 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI10 : Port Data Input
bits : 10 - 10 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI11 : Port Data Input
bits : 11 - 11 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI12 : Port Data Input
bits : 12 - 12 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI13 : Port Data Input
bits : 13 - 13 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI14 : Port Data Input
bits : 14 - 14 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI15 : Port Data Input
bits : 15 - 15 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI16 : Port Data Input
bits : 16 - 16 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI17 : Port Data Input
bits : 17 - 17 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI18 : Port Data Input
bits : 18 - 18 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI19 : Port Data Input
bits : 19 - 19 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI20 : Port Data Input
bits : 20 - 20 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI21 : Port Data Input
bits : 21 - 21 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI22 : Port Data Input
bits : 22 - 22 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI23 : Port Data Input
bits : 23 - 23 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI24 : Port Data Input
bits : 24 - 24 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI25 : Port Data Input
bits : 25 - 25 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI26 : Port Data Input
bits : 26 - 26 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI27 : Port Data Input
bits : 27 - 27 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI28 : Port Data Input
bits : 28 - 28 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI29 : Port Data Input
bits : 29 - 29 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI30 : Port Data Input
bits : 30 - 30 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.

PDI31 : Port Data Input
bits : 31 - 31 (1 bit)
access : read-only

Enumeration:

#0 : 0

Pin logic level is logic 0, or is not configured for use by digital function.

#1 : 1

Pin logic level is logic 1.

End of enumeration elements list.


PDDR

Port Data Direction Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

PDDR PDDR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PDD PDD0 PDD1 PDD2 PDD3 PDD4 PDD5 PDD6 PDD7 PDD8 PDD9 PDD10 PDD11 PDD12 PDD13 PDD14 PDD15 PDD16 PDD17 PDD18 PDD19 PDD20 PDD21 PDD22 PDD23 PDD24 PDD25 PDD26 PDD27 PDD28 PDD29 PDD30 PDD31

PDD : Port Data Direction
bits : 0 - 31 (32 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD0 : Port Data Direction
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD1 : Port Data Direction
bits : 1 - 1 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD2 : Port Data Direction
bits : 2 - 2 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD3 : Port Data Direction
bits : 3 - 3 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD4 : Port Data Direction
bits : 4 - 4 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD5 : Port Data Direction
bits : 5 - 5 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD6 : Port Data Direction
bits : 6 - 6 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD7 : Port Data Direction
bits : 7 - 7 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD8 : Port Data Direction
bits : 8 - 8 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD9 : Port Data Direction
bits : 9 - 9 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD10 : Port Data Direction
bits : 10 - 10 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD11 : Port Data Direction
bits : 11 - 11 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD12 : Port Data Direction
bits : 12 - 12 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD13 : Port Data Direction
bits : 13 - 13 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD14 : Port Data Direction
bits : 14 - 14 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD15 : Port Data Direction
bits : 15 - 15 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD16 : Port Data Direction
bits : 16 - 16 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD17 : Port Data Direction
bits : 17 - 17 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD18 : Port Data Direction
bits : 18 - 18 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD19 : Port Data Direction
bits : 19 - 19 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD20 : Port Data Direction
bits : 20 - 20 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD21 : Port Data Direction
bits : 21 - 21 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD22 : Port Data Direction
bits : 22 - 22 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD23 : Port Data Direction
bits : 23 - 23 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD24 : Port Data Direction
bits : 24 - 24 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD25 : Port Data Direction
bits : 25 - 25 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD26 : Port Data Direction
bits : 26 - 26 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD27 : Port Data Direction
bits : 27 - 27 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD28 : Port Data Direction
bits : 28 - 28 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD29 : Port Data Direction
bits : 29 - 29 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD30 : Port Data Direction
bits : 30 - 30 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.

PDD31 : Port Data Direction
bits : 31 - 31 (1 bit)
access : read-write

Enumeration:

#0 : 0

Pin is configured as general-purpose input, for the GPIO function.

#1 : 1

Pin is configured as general-purpose output, for the GPIO function.

End of enumeration elements list.


PSOR

Port Set Output Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

PSOR PSOR write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PTSO PTSO0 PTSO1 PTSO2 PTSO3 PTSO4 PTSO5 PTSO6 PTSO7 PTSO8 PTSO9 PTSO10 PTSO11 PTSO12 PTSO13 PTSO14 PTSO15 PTSO16 PTSO17 PTSO18 PTSO19 PTSO20 PTSO21 PTSO22 PTSO23 PTSO24 PTSO25 PTSO26 PTSO27 PTSO28 PTSO29 PTSO30 PTSO31

PTSO : Port Set Output
bits : 0 - 31 (32 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO0 : Port Set Output
bits : 0 - 0 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO1 : Port Set Output
bits : 1 - 1 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO2 : Port Set Output
bits : 2 - 2 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO3 : Port Set Output
bits : 3 - 3 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO4 : Port Set Output
bits : 4 - 4 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO5 : Port Set Output
bits : 5 - 5 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO6 : Port Set Output
bits : 6 - 6 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO7 : Port Set Output
bits : 7 - 7 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO8 : Port Set Output
bits : 8 - 8 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO9 : Port Set Output
bits : 9 - 9 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO10 : Port Set Output
bits : 10 - 10 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO11 : Port Set Output
bits : 11 - 11 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO12 : Port Set Output
bits : 12 - 12 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO13 : Port Set Output
bits : 13 - 13 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO14 : Port Set Output
bits : 14 - 14 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO15 : Port Set Output
bits : 15 - 15 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO16 : Port Set Output
bits : 16 - 16 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO17 : Port Set Output
bits : 17 - 17 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO18 : Port Set Output
bits : 18 - 18 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO19 : Port Set Output
bits : 19 - 19 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO20 : Port Set Output
bits : 20 - 20 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO21 : Port Set Output
bits : 21 - 21 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO22 : Port Set Output
bits : 22 - 22 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO23 : Port Set Output
bits : 23 - 23 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO24 : Port Set Output
bits : 24 - 24 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO25 : Port Set Output
bits : 25 - 25 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO26 : Port Set Output
bits : 26 - 26 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO27 : Port Set Output
bits : 27 - 27 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO28 : Port Set Output
bits : 28 - 28 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO29 : Port Set Output
bits : 29 - 29 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO30 : Port Set Output
bits : 30 - 30 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.

PTSO31 : Port Set Output
bits : 31 - 31 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to logic 1.

End of enumeration elements list.


PCOR

Port Clear Output Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

PCOR PCOR write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PTCO PTCO0 PTCO1 PTCO2 PTCO3 PTCO4 PTCO5 PTCO6 PTCO7 PTCO8 PTCO9 PTCO10 PTCO11 PTCO12 PTCO13 PTCO14 PTCO15 PTCO16 PTCO17 PTCO18 PTCO19 PTCO20 PTCO21 PTCO22 PTCO23 PTCO24 PTCO25 PTCO26 PTCO27 PTCO28 PTCO29 PTCO30 PTCO31

PTCO : Port Clear Output
bits : 0 - 31 (32 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO0 : Port Clear Output
bits : 0 - 0 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO1 : Port Clear Output
bits : 1 - 1 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO2 : Port Clear Output
bits : 2 - 2 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO3 : Port Clear Output
bits : 3 - 3 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO4 : Port Clear Output
bits : 4 - 4 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO5 : Port Clear Output
bits : 5 - 5 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO6 : Port Clear Output
bits : 6 - 6 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO7 : Port Clear Output
bits : 7 - 7 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO8 : Port Clear Output
bits : 8 - 8 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO9 : Port Clear Output
bits : 9 - 9 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO10 : Port Clear Output
bits : 10 - 10 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO11 : Port Clear Output
bits : 11 - 11 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO12 : Port Clear Output
bits : 12 - 12 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO13 : Port Clear Output
bits : 13 - 13 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO14 : Port Clear Output
bits : 14 - 14 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO15 : Port Clear Output
bits : 15 - 15 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO16 : Port Clear Output
bits : 16 - 16 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO17 : Port Clear Output
bits : 17 - 17 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO18 : Port Clear Output
bits : 18 - 18 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO19 : Port Clear Output
bits : 19 - 19 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO20 : Port Clear Output
bits : 20 - 20 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO21 : Port Clear Output
bits : 21 - 21 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO22 : Port Clear Output
bits : 22 - 22 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO23 : Port Clear Output
bits : 23 - 23 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO24 : Port Clear Output
bits : 24 - 24 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO25 : Port Clear Output
bits : 25 - 25 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO26 : Port Clear Output
bits : 26 - 26 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO27 : Port Clear Output
bits : 27 - 27 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO28 : Port Clear Output
bits : 28 - 28 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO29 : Port Clear Output
bits : 29 - 29 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO30 : Port Clear Output
bits : 30 - 30 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.

PTCO31 : Port Clear Output
bits : 31 - 31 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is cleared to logic 0.

End of enumeration elements list.


PTOR

Port Toggle Output Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

PTOR PTOR write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PTTO PTTO0 PTTO1 PTTO2 PTTO3 PTTO4 PTTO5 PTTO6 PTTO7 PTTO8 PTTO9 PTTO10 PTTO11 PTTO12 PTTO13 PTTO14 PTTO15 PTTO16 PTTO17 PTTO18 PTTO19 PTTO20 PTTO21 PTTO22 PTTO23 PTTO24 PTTO25 PTTO26 PTTO27 PTTO28 PTTO29 PTTO30 PTTO31

PTTO : Port Toggle Output
bits : 0 - 31 (32 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO0 : Port Toggle Output
bits : 0 - 0 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO1 : Port Toggle Output
bits : 1 - 1 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO2 : Port Toggle Output
bits : 2 - 2 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO3 : Port Toggle Output
bits : 3 - 3 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO4 : Port Toggle Output
bits : 4 - 4 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO5 : Port Toggle Output
bits : 5 - 5 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO6 : Port Toggle Output
bits : 6 - 6 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO7 : Port Toggle Output
bits : 7 - 7 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO8 : Port Toggle Output
bits : 8 - 8 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO9 : Port Toggle Output
bits : 9 - 9 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO10 : Port Toggle Output
bits : 10 - 10 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO11 : Port Toggle Output
bits : 11 - 11 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO12 : Port Toggle Output
bits : 12 - 12 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO13 : Port Toggle Output
bits : 13 - 13 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO14 : Port Toggle Output
bits : 14 - 14 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO15 : Port Toggle Output
bits : 15 - 15 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO16 : Port Toggle Output
bits : 16 - 16 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO17 : Port Toggle Output
bits : 17 - 17 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO18 : Port Toggle Output
bits : 18 - 18 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO19 : Port Toggle Output
bits : 19 - 19 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO20 : Port Toggle Output
bits : 20 - 20 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO21 : Port Toggle Output
bits : 21 - 21 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO22 : Port Toggle Output
bits : 22 - 22 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO23 : Port Toggle Output
bits : 23 - 23 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO24 : Port Toggle Output
bits : 24 - 24 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO25 : Port Toggle Output
bits : 25 - 25 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO26 : Port Toggle Output
bits : 26 - 26 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO27 : Port Toggle Output
bits : 27 - 27 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO28 : Port Toggle Output
bits : 28 - 28 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO29 : Port Toggle Output
bits : 29 - 29 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO30 : Port Toggle Output
bits : 30 - 30 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.

PTTO31 : Port Toggle Output
bits : 31 - 31 (1 bit)
access : write-only

Enumeration:

#0 : 0

Corresponding bit in PDORn does not change.

#1 : 1

Corresponding bit in PDORn is set to the inverse of its existing logic state.

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.