\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection : not protected
Backdoor Comparison Key 0
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 1
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 2
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 3
address_offset : 0x3 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 4
address_offset : 0x4 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 5
address_offset : 0x5 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 6
address_offset : 0x6 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Backdoor Comparison Key 7
address_offset : 0x7 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Backdoor Comparison Key.
bits : 0 - 7 (8 bit)
access : read-only
Non-volatile P-Flash Protection Register
address_offset : 0xD Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FPLS : no description available
bits : 0 - 1 (2 bit)
access : read-only
Enumeration:
#00 : 00
Address range: 0x00_0000-0x00_07FF; protected size: 2 KB
#01 : 01
Address range: 0x00_0000-0x00_0FFF; protected size: 4 KB
#10 : 10
Address range: 0x00_0000-0x00_1FFF; protected size: 8 KB
#11 : 11
Address range: 0x00_0000-0x00_3FFF; protected size: 16 KB
End of enumeration elements list.
FPLDIS : no description available
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
#00 : 00
Protection/Unprotection enabled
#01 : 01
Protection/Unprotection disabled
End of enumeration elements list.
FPHS : no description available
bits : 3 - 4 (2 bit)
access : read-only
Enumeration:
#00 : 00
Address range: 0x00_7C00-0x00_7FFF; protected size: 1 KB
#01 : 01
Address range: 0x00_7800-0x00_7FFF; protected size: 2 KB
#10 : 10
Address range: 0x00_7000-0x00_7FFF; protected size: 4 KB
#11 : 11
Address range: 0x00_6000-0x00_7FFF; protected size: 8 KB
End of enumeration elements list.
FPHDIS : no description available
bits : 5 - 5 (1 bit)
access : read-only
Enumeration:
#00 : 00
Protection/Unprotection enabled
#01 : 01
Protection/Unprotection disabled
End of enumeration elements list.
FPOPEN : no description available
bits : 7 - 7 (1 bit)
access : read-only
Enumeration:
#00 : 00
FPHDIS and FPLDIS bits define unprotected address ranges as specified by the corresponding FPHS and FPLS bits FPROT1.1
#01 : 01
FPHDIS and FPLDIS bits enable protection for the address range specified by the corresponding FPHS and FPLS bits
End of enumeration elements list.
Non-volatile Flash Security Register
address_offset : 0xE Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SEC : Flash Security
bits : 0 - 1 (2 bit)
access : read-only
Enumeration:
#10 : 10
MCU security status is unsecure
#11 : 11
MCU security status is secure
End of enumeration elements list.
KEYEN : Backdoor Key Security Enable
bits : 6 - 7 (2 bit)
access : read-only
Enumeration:
#10 : 10
Backdoor key access enabled
#11 : 11
Backdoor key access disabled
End of enumeration elements list.
Non-volatile Flash Option Register
address_offset : 0xF Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.