Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x18 byte (0x0)
mem_usage : registers
protection : not protected
Port Data Output Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDO : Port Data Output
bits : 0 - 31 (32 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO0 : Port Data Output
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO1 : Port Data Output
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO2 : Port Data Output
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO3 : Port Data Output
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO4 : Port Data Output
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO5 : Port Data Output
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO6 : Port Data Output
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO7 : Port Data Output
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO8 : Port Data Output
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO9 : Port Data Output
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO10 : Port Data Output
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO11 : Port Data Output
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO12 : Port Data Output
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO13 : Port Data Output
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO14 : Port Data Output
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO15 : Port Data Output
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO16 : Port Data Output
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO17 : Port Data Output
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO18 : Port Data Output
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO19 : Port Data Output
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO20 : Port Data Output
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO21 : Port Data Output
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO22 : Port Data Output
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO23 : Port Data Output
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO24 : Port Data Output
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO25 : Port Data Output
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO26 : Port Data Output
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO27 : Port Data Output
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO28 : Port Data Output
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO29 : Port Data Output
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO30 : Port Data Output
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO31 : Port Data Output
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
0 : PDO_0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
0x1 : PDO_1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
Port Data Input Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PDI : Port Data Input
bits : 0 - 31 (32 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI0 : Port Data Input
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI1 : Port Data Input
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI2 : Port Data Input
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI3 : Port Data Input
bits : 3 - 3 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI4 : Port Data Input
bits : 4 - 4 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI5 : Port Data Input
bits : 5 - 5 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI6 : Port Data Input
bits : 6 - 6 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI7 : Port Data Input
bits : 7 - 7 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI8 : Port Data Input
bits : 8 - 8 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI9 : Port Data Input
bits : 9 - 9 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI10 : Port Data Input
bits : 10 - 10 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI11 : Port Data Input
bits : 11 - 11 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI12 : Port Data Input
bits : 12 - 12 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI13 : Port Data Input
bits : 13 - 13 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI14 : Port Data Input
bits : 14 - 14 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI15 : Port Data Input
bits : 15 - 15 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI16 : Port Data Input
bits : 16 - 16 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI17 : Port Data Input
bits : 17 - 17 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI18 : Port Data Input
bits : 18 - 18 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI19 : Port Data Input
bits : 19 - 19 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI20 : Port Data Input
bits : 20 - 20 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI21 : Port Data Input
bits : 21 - 21 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI22 : Port Data Input
bits : 22 - 22 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI23 : Port Data Input
bits : 23 - 23 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI24 : Port Data Input
bits : 24 - 24 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI25 : Port Data Input
bits : 25 - 25 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI26 : Port Data Input
bits : 26 - 26 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI27 : Port Data Input
bits : 27 - 27 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI28 : Port Data Input
bits : 28 - 28 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI29 : Port Data Input
bits : 29 - 29 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI30 : Port Data Input
bits : 30 - 30 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
PDI31 : Port Data Input
bits : 31 - 31 (1 bit)
access : read-only
Enumeration:
0 : PDI_0
Pin logic level is logic 0, or is not configured for use by digital function.
0x1 : PDI_1
Pin logic level is logic 1.
End of enumeration elements list.
Port Data Direction Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDD : Port Data Direction
bits : 0 - 31 (32 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD0 : Port Data Direction
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD1 : Port Data Direction
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD2 : Port Data Direction
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD3 : Port Data Direction
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD4 : Port Data Direction
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD5 : Port Data Direction
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD6 : Port Data Direction
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD7 : Port Data Direction
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD8 : Port Data Direction
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD9 : Port Data Direction
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD10 : Port Data Direction
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD11 : Port Data Direction
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD12 : Port Data Direction
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD13 : Port Data Direction
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD14 : Port Data Direction
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD15 : Port Data Direction
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD16 : Port Data Direction
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD17 : Port Data Direction
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD18 : Port Data Direction
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD19 : Port Data Direction
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD20 : Port Data Direction
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD21 : Port Data Direction
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD22 : Port Data Direction
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD23 : Port Data Direction
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD24 : Port Data Direction
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD25 : Port Data Direction
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD26 : Port Data Direction
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD27 : Port Data Direction
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD28 : Port Data Direction
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD29 : Port Data Direction
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD30 : Port Data Direction
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD31 : Port Data Direction
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
0 : PDD_0
Pin is configured as general-purpose input, for the GPIO function.
0x1 : PDD_1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
Port Set Output Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTSO : Port Set Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO0 : Port Set Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO1 : Port Set Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO2 : Port Set Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO3 : Port Set Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO4 : Port Set Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO5 : Port Set Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO6 : Port Set Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO7 : Port Set Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO8 : Port Set Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO9 : Port Set Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO10 : Port Set Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO11 : Port Set Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO12 : Port Set Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO13 : Port Set Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO14 : Port Set Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO15 : Port Set Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO16 : Port Set Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO17 : Port Set Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO18 : Port Set Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO19 : Port Set Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO20 : Port Set Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO21 : Port Set Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO22 : Port Set Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO23 : Port Set Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO24 : Port Set Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO25 : Port Set Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO26 : Port Set Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO27 : Port Set Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO28 : Port Set Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO29 : Port Set Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO30 : Port Set Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO31 : Port Set Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
0 : PTSO_0
Corresponding bit in PDORn does not change.
0x1 : PTSO_1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
Port Clear Output Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTCO : Port Clear Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO0 : Port Clear Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO1 : Port Clear Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO2 : Port Clear Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO3 : Port Clear Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO4 : Port Clear Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO5 : Port Clear Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO6 : Port Clear Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO7 : Port Clear Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO8 : Port Clear Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO9 : Port Clear Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO10 : Port Clear Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO11 : Port Clear Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO12 : Port Clear Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO13 : Port Clear Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO14 : Port Clear Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO15 : Port Clear Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO16 : Port Clear Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO17 : Port Clear Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO18 : Port Clear Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO19 : Port Clear Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO20 : Port Clear Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO21 : Port Clear Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO22 : Port Clear Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO23 : Port Clear Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO24 : Port Clear Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO25 : Port Clear Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO26 : Port Clear Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO27 : Port Clear Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO28 : Port Clear Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO29 : Port Clear Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO30 : Port Clear Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO31 : Port Clear Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
0 : PTCO_0
Corresponding bit in PDORn does not change.
0x1 : PTCO_1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
Port Toggle Output Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTTO : Port Toggle Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO0 : Port Toggle Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO1 : Port Toggle Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO2 : Port Toggle Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO3 : Port Toggle Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO4 : Port Toggle Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO5 : Port Toggle Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO6 : Port Toggle Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO7 : Port Toggle Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO8 : Port Toggle Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO9 : Port Toggle Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO10 : Port Toggle Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO11 : Port Toggle Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO12 : Port Toggle Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO13 : Port Toggle Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO14 : Port Toggle Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO15 : Port Toggle Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO16 : Port Toggle Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO17 : Port Toggle Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO18 : Port Toggle Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO19 : Port Toggle Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO20 : Port Toggle Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO21 : Port Toggle Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO22 : Port Toggle Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO23 : Port Toggle Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO24 : Port Toggle Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO25 : Port Toggle Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO26 : Port Toggle Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO27 : Port Toggle Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO28 : Port Toggle Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO29 : Port Toggle Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO30 : Port Toggle Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO31 : Port Toggle Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
0 : PTTO_0
Corresponding bit in PDORn does not change.
0x1 : PTTO_1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.