Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x8 Bytes (0x0)
size : 0x3C byte (0x0)
mem_usage : registers
protection : not protected
Compute Operation Control Register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CPOREQ : Compute Operation Request
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Request is cleared.
#1 : 1
Request Compute Operation.
End of enumeration elements list.
CPOACK : Compute Operation Acknowledge
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
#0 : 0
Compute operation entry has not completed or compute operation exit has completed.
#1 : 1
Compute operation entry has completed or compute operation exit has not completed.
End of enumeration elements list.
CPOWOI : Compute Operation Wake-up on Interrupt
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
No effect.
#1 : 1
When set, the CPOREQ is cleared on any interrupt or exception vector fetch.
End of enumeration elements list.
Crossbar Switch (AXBS) Slave Configuration
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ASC : Each bit in the ASC field indicates whether there is a corresponding connection to the crossbar switch's slave input port.
bits : 0 - 7 (8 bit)
access : read-only
Enumeration:
#0 : 0
A bus slave connection to AXBS input port n is absent.
#1 : 1
A bus slave connection to AXBS input port n is present.
End of enumeration elements list.
Crossbar Switch (AXBS) Master Configuration
address_offset : 0xA Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
AMC : Each bit in the AMC field indicates whether there is a corresponding connection to the AXBS master input port.
bits : 0 - 7 (8 bit)
access : read-only
Enumeration:
#0 : 0
A bus master connection to AXBS input port n is absent
#1 : 1
A bus master connection to AXBS input port n is present
End of enumeration elements list.
Platform Control Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ARB : Arbitration select
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
Fixed-priority arbitration for the crossbar masters
#1 : 1
Round-robin arbitration for the crossbar masters
End of enumeration elements list.
CFCC : Clear Flash Controller Cache
bits : 10 - 10 (1 bit)
access : write-only
DFCDA : Disable Flash Controller Data Caching
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
Enable flash controller data caching
#1 : 1
Disable flash controller data caching.
End of enumeration elements list.
DFCIC : Disable Flash Controller Instruction Caching
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
Enable flash controller instruction caching.
#1 : 1
Disable flash controller instruction caching.
End of enumeration elements list.
DFCC : Disable Flash Controller Cache
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
Enable flash controller cache.
#1 : 1
Disable flash controller cache.
End of enumeration elements list.
EFDS : Enable Flash Data Speculation
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable flash data speculation.
#1 : 1
Enable flash data speculation.
End of enumeration elements list.
DFCS : Disable Flash Controller Speculation
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Enable flash controller speculation.
#1 : 1
Disable flash controller speculation.
End of enumeration elements list.
ESFC : Enable Stalling Flash Controller
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable stalling flash controller when flash is busy.
#1 : 1
Enable stalling flash controller when flash is busy.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.