Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x18 byte (0x0)
mem_usage : registers
protection : not protected
Port Data Output Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDO : Port Data Output
bits : 0 - 31 (32 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO0 : Port Data Output
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO1 : Port Data Output
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO2 : Port Data Output
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO3 : Port Data Output
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO4 : Port Data Output
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO5 : Port Data Output
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO6 : Port Data Output
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO7 : Port Data Output
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO8 : Port Data Output
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO9 : Port Data Output
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO10 : Port Data Output
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO11 : Port Data Output
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO12 : Port Data Output
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO13 : Port Data Output
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO14 : Port Data Output
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO15 : Port Data Output
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO16 : Port Data Output
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO17 : Port Data Output
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO18 : Port Data Output
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO19 : Port Data Output
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO20 : Port Data Output
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO21 : Port Data Output
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO22 : Port Data Output
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO23 : Port Data Output
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO24 : Port Data Output
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO25 : Port Data Output
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO26 : Port Data Output
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO27 : Port Data Output
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO28 : Port Data Output
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO29 : Port Data Output
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO30 : Port Data Output
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
PDO31 : Port Data Output
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
Port Data Input Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PDI : Port Data Input
bits : 0 - 31 (32 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI0 : Port Data Input
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI1 : Port Data Input
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI2 : Port Data Input
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI3 : Port Data Input
bits : 3 - 3 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI4 : Port Data Input
bits : 4 - 4 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI5 : Port Data Input
bits : 5 - 5 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI6 : Port Data Input
bits : 6 - 6 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI7 : Port Data Input
bits : 7 - 7 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI8 : Port Data Input
bits : 8 - 8 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI9 : Port Data Input
bits : 9 - 9 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI10 : Port Data Input
bits : 10 - 10 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI11 : Port Data Input
bits : 11 - 11 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI12 : Port Data Input
bits : 12 - 12 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI13 : Port Data Input
bits : 13 - 13 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI14 : Port Data Input
bits : 14 - 14 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI15 : Port Data Input
bits : 15 - 15 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI16 : Port Data Input
bits : 16 - 16 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI17 : Port Data Input
bits : 17 - 17 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI18 : Port Data Input
bits : 18 - 18 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI19 : Port Data Input
bits : 19 - 19 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI20 : Port Data Input
bits : 20 - 20 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI21 : Port Data Input
bits : 21 - 21 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI22 : Port Data Input
bits : 22 - 22 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI23 : Port Data Input
bits : 23 - 23 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI24 : Port Data Input
bits : 24 - 24 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI25 : Port Data Input
bits : 25 - 25 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI26 : Port Data Input
bits : 26 - 26 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI27 : Port Data Input
bits : 27 - 27 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI28 : Port Data Input
bits : 28 - 28 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI29 : Port Data Input
bits : 29 - 29 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI30 : Port Data Input
bits : 30 - 30 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
PDI31 : Port Data Input
bits : 31 - 31 (1 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
Port Data Direction Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDD : Port Data Direction
bits : 0 - 31 (32 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD0 : Port Data Direction
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD1 : Port Data Direction
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD2 : Port Data Direction
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD3 : Port Data Direction
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD4 : Port Data Direction
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD5 : Port Data Direction
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD6 : Port Data Direction
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD7 : Port Data Direction
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD8 : Port Data Direction
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD9 : Port Data Direction
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD10 : Port Data Direction
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD11 : Port Data Direction
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD12 : Port Data Direction
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD13 : Port Data Direction
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD14 : Port Data Direction
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD15 : Port Data Direction
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD16 : Port Data Direction
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD17 : Port Data Direction
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD18 : Port Data Direction
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD19 : Port Data Direction
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD20 : Port Data Direction
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD21 : Port Data Direction
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD22 : Port Data Direction
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD23 : Port Data Direction
bits : 23 - 23 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD24 : Port Data Direction
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD25 : Port Data Direction
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD26 : Port Data Direction
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD27 : Port Data Direction
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD28 : Port Data Direction
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD29 : Port Data Direction
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD30 : Port Data Direction
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
PDD31 : Port Data Direction
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
Port Set Output Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTSO : Port Set Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO0 : Port Set Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO1 : Port Set Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO2 : Port Set Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO3 : Port Set Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO4 : Port Set Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO5 : Port Set Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO6 : Port Set Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO7 : Port Set Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO8 : Port Set Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO9 : Port Set Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO10 : Port Set Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO11 : Port Set Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO12 : Port Set Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO13 : Port Set Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO14 : Port Set Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO15 : Port Set Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO16 : Port Set Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO17 : Port Set Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO18 : Port Set Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO19 : Port Set Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO20 : Port Set Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO21 : Port Set Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO22 : Port Set Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO23 : Port Set Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO24 : Port Set Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO25 : Port Set Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO26 : Port Set Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO27 : Port Set Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO28 : Port Set Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO29 : Port Set Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO30 : Port Set Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
PTSO31 : Port Set Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to logic 1.
End of enumeration elements list.
Port Clear Output Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTCO : Port Clear Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO0 : Port Clear Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO1 : Port Clear Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO2 : Port Clear Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO3 : Port Clear Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO4 : Port Clear Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO5 : Port Clear Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO6 : Port Clear Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO7 : Port Clear Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO8 : Port Clear Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO9 : Port Clear Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO10 : Port Clear Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO11 : Port Clear Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO12 : Port Clear Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO13 : Port Clear Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO14 : Port Clear Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO15 : Port Clear Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO16 : Port Clear Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO17 : Port Clear Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO18 : Port Clear Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO19 : Port Clear Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO20 : Port Clear Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO21 : Port Clear Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO22 : Port Clear Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO23 : Port Clear Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO24 : Port Clear Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO25 : Port Clear Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO26 : Port Clear Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO27 : Port Clear Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO28 : Port Clear Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO29 : Port Clear Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO30 : Port Clear Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
PTCO31 : Port Clear Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is cleared to logic 0.
End of enumeration elements list.
Port Toggle Output Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PTTO : Port Toggle Output
bits : 0 - 31 (32 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO0 : Port Toggle Output
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO1 : Port Toggle Output
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO2 : Port Toggle Output
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO3 : Port Toggle Output
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO4 : Port Toggle Output
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO5 : Port Toggle Output
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO6 : Port Toggle Output
bits : 6 - 6 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO7 : Port Toggle Output
bits : 7 - 7 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO8 : Port Toggle Output
bits : 8 - 8 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO9 : Port Toggle Output
bits : 9 - 9 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO10 : Port Toggle Output
bits : 10 - 10 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO11 : Port Toggle Output
bits : 11 - 11 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO12 : Port Toggle Output
bits : 12 - 12 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO13 : Port Toggle Output
bits : 13 - 13 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO14 : Port Toggle Output
bits : 14 - 14 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO15 : Port Toggle Output
bits : 15 - 15 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO16 : Port Toggle Output
bits : 16 - 16 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO17 : Port Toggle Output
bits : 17 - 17 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO18 : Port Toggle Output
bits : 18 - 18 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO19 : Port Toggle Output
bits : 19 - 19 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO20 : Port Toggle Output
bits : 20 - 20 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO21 : Port Toggle Output
bits : 21 - 21 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO22 : Port Toggle Output
bits : 22 - 22 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO23 : Port Toggle Output
bits : 23 - 23 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO24 : Port Toggle Output
bits : 24 - 24 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO25 : Port Toggle Output
bits : 25 - 25 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO26 : Port Toggle Output
bits : 26 - 26 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO27 : Port Toggle Output
bits : 27 - 27 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO28 : Port Toggle Output
bits : 28 - 28 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO29 : Port Toggle Output
bits : 29 - 29 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO30 : Port Toggle Output
bits : 30 - 30 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
PTTO31 : Port Toggle Output
bits : 31 - 31 (1 bit)
access : write-only
Enumeration:
#0 : 0
Corresponding bit in PDORn does not change.
#1 : 1
Corresponding bit in PDORn is set to the inverse of its existing logic state.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.