\n
address_offset : 0x0 Bytes (0x0)
size : 0x1D byte (0x0)
mem_usage : registers
protection : not protected
Port Data Output Register
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDO : Port Data Output
bits : 0 - 7 (8 bit)
access : read-write
Enumeration:
#0 : 0
Logic level 0 is driven on pin, provided pin is configured for general-purpose output.
#1 : 1
Logic level 1 is driven on pin, provided pin is configured for general-purpose output.
End of enumeration elements list.
Port Data Input Register
address_offset : 0x10 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PDI : Port Data Input
bits : 0 - 7 (8 bit)
access : read-only
Enumeration:
#0 : 0
Pin logic level is logic 0, or is not configured for use by digital function.
#1 : 1
Pin logic level is logic 1.
End of enumeration elements list.
Port Data Direction Register
address_offset : 0x14 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDD : Port Data Direction
bits : 0 - 7 (8 bit)
access : read-write
Enumeration:
#0 : 0
Pin is configured as general-purpose input, for the GPIO function.
#1 : 1
Pin is configured as general-purpose output, for the GPIO function.
End of enumeration elements list.
GPIO Attribute Checker Register
address_offset : 0x1C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACB : Attribute Check Byte
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#000 : 000
User nonsecure: Read + Write; User Secure: Read + Write; Privileged Secure: Read + Write
#001 : 001
User nonsecure: Read; User Secure: Read + Write; Privileged Secure: Read + Write
#010 : 010
User nonsecure: None; User Secure: Read + Write; Privileged Secure: Read + Write
#011 : 011
User nonsecure: Read; User Secure: Read; Privileged Secure: Read + Write
#100 : 100
User nonsecure: None; User Secure: Read; Privileged Secure: Read + Write
#101 : 101
User nonsecure: None; User Secure: None; Privileged Secure: Read + Write
#110 : 110
User nonsecure: None; User Secure: None; Privileged Secure: Read
#111 : 111
User nonsecure: None; User Secure: None; Privileged Secure: None
End of enumeration elements list.
ROB : Read-Only Byte
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
Writes to the ACB are allowed.
#1 : 1
Writes to the ACB are ignored.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.