\n

NVMC

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

READY

CONFIG

ERASEPAGE

ERASEPCR1

ERASEALL

ERASEPCR0

ERASEUICR


READY

Ready flag.
address_offset : 0x400 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0

READY READY read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 READY

READY : NVMC ready.
bits : 0 - -1 (0 bit)

Enumeration:

0 : Busy

NVMC is busy (on-going write or erase operation).

1 : Ready

NVMC is ready.

End of enumeration elements list.


CONFIG

Configuration register.
address_offset : 0x504 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CONFIG CONFIG read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 WEN

WEN : Program write enable.
bits : 0 - 0 (1 bit)

Enumeration:

0x00 : Ren

Read only access.

0x01 : Wen

Write enabled.

0x02 : Een

Erase enabled.

End of enumeration elements list.


ERASEPAGE

Register for erasing a non-protected non-volatile memory page.
address_offset : 0x508 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ERASEPAGE ERASEPAGE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

ERASEPCR1

Register for erasing a non-protected non-volatile memory page.
address_offset : 0x508 Bytes (0x0)
access : read-write
reset_value : 0x0
alternate_register : ERASEPAGE
reset_Mask : 0x0

ERASEPCR1 ERASEPCR1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

ERASEALL

Register for erasing all non-volatile user memory.
address_offset : 0x50C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ERASEALL ERASEALL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ERASEALL

ERASEALL : Starts the erasing of all user NVM (code region 0/1 and UICR registers).
bits : 0 - -1 (0 bit)

Enumeration:

0 : NoOperation

No operation.

1 : Erase

Start chip erase.

End of enumeration elements list.


ERASEPCR0

Register for erasing a protected non-volatile memory page.
address_offset : 0x510 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ERASEPCR0 ERASEPCR0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

ERASEUICR

Register for start erasing User Information Congfiguration Registers.
address_offset : 0x514 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ERASEUICR ERASEUICR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ERASEUICR

ERASEUICR : It can only be used when all contents of code region 1 are erased.
bits : 0 - -1 (0 bit)

Enumeration:

0 : NoOperation

No operation.

1 : Erase

Start UICR erase.

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.