Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
Start ECB block encrypt
address_offset : 0x0 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_STARTECB : Start ECB block encrypt
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
ECB block encrypt complete
address_offset : 0x100 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_ENDECB : ECB block encrypt complete
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
ECB block encrypt aborted because of a STOPECB task or due to an error
address_offset : 0x104 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_ERRORECB : ECB block encrypt aborted because of a STOPECB task or due to an error
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Enable interrupt
address_offset : 0x304 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ENDECB : Write '1' to enable interrupt for event ENDECB
bits : 0 - -1 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
ERRORECB : Write '1' to enable interrupt for event ERRORECB
bits : 1 - 0 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
Disable interrupt
address_offset : 0x308 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ENDECB : Write '1' to disable interrupt for event ENDECB
bits : 0 - -1 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
ERRORECB : Write '1' to disable interrupt for event ERRORECB
bits : 1 - 0 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
Abort a possible executing ECB operation
address_offset : 0x4 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_STOPECB : Abort a possible executing ECB operation
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
ECB block encrypt memory pointers
address_offset : 0x504 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ECBDATAPTR : Pointer to the ECB data structure (see Table 1 ECB data structure overview)
bits : 0 - 30 (31 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.