\n

OSCILLATORS

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

XOSC32KI - BYPASS

XOSC32KI - INTCAP

XOSC32MCAPS


XOSC32KI - BYPASS

Unspecified - - Enable or disable bypass of LFCLK crystal oscillator with external clock source
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

XOSC32KI - BYPASS XOSC32KI - BYPASS read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BYPASS

BYPASS : Enable or disable bypass of LFCLK crystal oscillator with external clock source
bits : 0 - -1 (0 bit)

Enumeration:

0 : Disabled

Disable (use with xtal or low-swing external source)

1 : Enabled

Enable (use with rail-to-rail external source)

End of enumeration elements list.


XOSC32KI - INTCAP

Unspecified - - Control usage of internal load capacitors
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

XOSC32KI - INTCAP XOSC32KI - INTCAP read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 INTCAP

INTCAP : Control usage of internal load capacitors
bits : 0 - 0 (1 bit)

Enumeration:

0 : External

Use external load capacitors

1 : C6PF

6 pF internal load capacitance

2 : C7PF

7 pF internal load capacitance

3 : C9PF

9 pF internal load capacitance

3 : C11PF

11 pF internal load capacitance

End of enumeration elements list.


XOSC32MCAPS

Programmable capacitance of XC1 and XC2
address_offset : 0x5C4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

XOSC32MCAPS XOSC32MCAPS read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CAPVALUE ENABLE

CAPVALUE : Value representing capacitance, calculated using provided equation
bits : 0 - 3 (4 bit)

ENABLE : Enable on-chip capacitors on XC1 and XC2
bits : 8 - 7 (0 bit)

Enumeration:

0 : Disabled

Capacitor disabled (use external caps)

1 : Enabled

Capacitor enabled

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.