\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x0 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x100 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x106C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x108 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x10B4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x1134 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x11A4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: General purpose memory
address_offset : 0x1234 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPMEM : General purpose memory
bits : 0 - 30 (31 bit)
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x12DC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x12E0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x138 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x144C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x1488 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x1638 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x164C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x16C Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x17EC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x18 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x184 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x1968 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x19A4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x1A4 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x1B60 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x1BE8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x1E0 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x1E88 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x200 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x20C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x2188 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x23AC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x272C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x28 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x28D4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x298 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x2CD4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x2E00 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x300 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Enable or disable interrupt
address_offset : 0x300 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RECEIVE0 : Enable or disable interrupt for event RECEIVE[0]
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE1 : Enable or disable interrupt for event RECEIVE[1]
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE2 : Enable or disable interrupt for event RECEIVE[2]
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE3 : Enable or disable interrupt for event RECEIVE[3]
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE4 : Enable or disable interrupt for event RECEIVE[4]
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE5 : Enable or disable interrupt for event RECEIVE[5]
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE6 : Enable or disable interrupt for event RECEIVE[6]
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE7 : Enable or disable interrupt for event RECEIVE[7]
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE8 : Enable or disable interrupt for event RECEIVE[8]
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE9 : Enable or disable interrupt for event RECEIVE[9]
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE10 : Enable or disable interrupt for event RECEIVE[10]
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE11 : Enable or disable interrupt for event RECEIVE[11]
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE12 : Enable or disable interrupt for event RECEIVE[12]
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE13 : Enable or disable interrupt for event RECEIVE[13]
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE14 : Enable or disable interrupt for event RECEIVE[14]
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
RECEIVE15 : Enable or disable interrupt for event RECEIVE[15]
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disabled
Disable
1 : Enabled
Enable
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x304 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Enable interrupt
address_offset : 0x304 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RECEIVE0 : Write '1' to enable interrupt for event RECEIVE[0]
bits : 0 - -1 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE1 : Write '1' to enable interrupt for event RECEIVE[1]
bits : 1 - 0 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE2 : Write '1' to enable interrupt for event RECEIVE[2]
bits : 2 - 1 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE3 : Write '1' to enable interrupt for event RECEIVE[3]
bits : 3 - 2 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE4 : Write '1' to enable interrupt for event RECEIVE[4]
bits : 4 - 3 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE5 : Write '1' to enable interrupt for event RECEIVE[5]
bits : 5 - 4 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE6 : Write '1' to enable interrupt for event RECEIVE[6]
bits : 6 - 5 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE7 : Write '1' to enable interrupt for event RECEIVE[7]
bits : 7 - 6 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE8 : Write '1' to enable interrupt for event RECEIVE[8]
bits : 8 - 7 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE9 : Write '1' to enable interrupt for event RECEIVE[9]
bits : 9 - 8 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE10 : Write '1' to enable interrupt for event RECEIVE[10]
bits : 10 - 9 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE11 : Write '1' to enable interrupt for event RECEIVE[11]
bits : 11 - 10 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE12 : Write '1' to enable interrupt for event RECEIVE[12]
bits : 12 - 11 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE13 : Write '1' to enable interrupt for event RECEIVE[13]
bits : 13 - 12 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE14 : Write '1' to enable interrupt for event RECEIVE[14]
bits : 14 - 13 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
RECEIVE15 : Write '1' to enable interrupt for event RECEIVE[15]
bits : 15 - 14 (0 bit)
Enumeration: ( write )
1 : Set
Enable
End of enumeration elements list.
Disable interrupt
address_offset : 0x308 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RECEIVE0 : Write '1' to disable interrupt for event RECEIVE[0]
bits : 0 - -1 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE1 : Write '1' to disable interrupt for event RECEIVE[1]
bits : 1 - 0 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE2 : Write '1' to disable interrupt for event RECEIVE[2]
bits : 2 - 1 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE3 : Write '1' to disable interrupt for event RECEIVE[3]
bits : 3 - 2 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE4 : Write '1' to disable interrupt for event RECEIVE[4]
bits : 4 - 3 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE5 : Write '1' to disable interrupt for event RECEIVE[5]
bits : 5 - 4 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE6 : Write '1' to disable interrupt for event RECEIVE[6]
bits : 6 - 5 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE7 : Write '1' to disable interrupt for event RECEIVE[7]
bits : 7 - 6 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE8 : Write '1' to disable interrupt for event RECEIVE[8]
bits : 8 - 7 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE9 : Write '1' to disable interrupt for event RECEIVE[9]
bits : 9 - 8 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE10 : Write '1' to disable interrupt for event RECEIVE[10]
bits : 10 - 9 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE11 : Write '1' to disable interrupt for event RECEIVE[11]
bits : 11 - 10 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE12 : Write '1' to disable interrupt for event RECEIVE[12]
bits : 12 - 11 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE13 : Write '1' to disable interrupt for event RECEIVE[13]
bits : 13 - 12 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE14 : Write '1' to disable interrupt for event RECEIVE[14]
bits : 14 - 13 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
RECEIVE15 : Write '1' to disable interrupt for event RECEIVE[15]
bits : 15 - 14 (0 bit)
Enumeration: ( write )
1 : Clear
Disable
End of enumeration elements list.
Pending interrupts
address_offset : 0x30C Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
RECEIVE0 : Read pending status of interrupt for event RECEIVE[0]
bits : 0 - -1 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE1 : Read pending status of interrupt for event RECEIVE[1]
bits : 1 - 0 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE2 : Read pending status of interrupt for event RECEIVE[2]
bits : 2 - 1 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE3 : Read pending status of interrupt for event RECEIVE[3]
bits : 3 - 2 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE4 : Read pending status of interrupt for event RECEIVE[4]
bits : 4 - 3 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE5 : Read pending status of interrupt for event RECEIVE[5]
bits : 5 - 4 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE6 : Read pending status of interrupt for event RECEIVE[6]
bits : 6 - 5 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE7 : Read pending status of interrupt for event RECEIVE[7]
bits : 7 - 6 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE8 : Read pending status of interrupt for event RECEIVE[8]
bits : 8 - 7 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE9 : Read pending status of interrupt for event RECEIVE[9]
bits : 9 - 8 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE10 : Read pending status of interrupt for event RECEIVE[10]
bits : 10 - 9 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE11 : Read pending status of interrupt for event RECEIVE[11]
bits : 11 - 10 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE12 : Read pending status of interrupt for event RECEIVE[12]
bits : 12 - 11 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE13 : Read pending status of interrupt for event RECEIVE[13]
bits : 13 - 12 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE14 : Read pending status of interrupt for event RECEIVE[14]
bits : 14 - 13 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
RECEIVE15 : Read pending status of interrupt for event RECEIVE[15]
bits : 15 - 14 (0 bit)
Enumeration: ( read )
0 : NotPending
Read: Not pending
1 : Pending
Read: Pending
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x328 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x3280 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x3330 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x3830 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x3864 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x3BC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x3C Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x3D9C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x3DE4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x4 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x40C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x42D8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x439C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x454 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x4818 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x484 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x4958 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x4D5C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x4F0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x4F18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x518 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x52A4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x54 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x54DC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0x57F0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x590 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x5AA4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0x6070 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x60C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x628 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x634 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x6DC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x70 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x73C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x788 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x798 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x838 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x854 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x8EC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0x90 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0x928 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0x970 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0x9A4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0xA20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Subscribe configuration for task SEND[n]
address_offset : 0xA60 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that task SEND[n] will subscribe to
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable subscription
1 : Enabled
Enable subscription
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0xA90 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0xABC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Receive event configuration for EVENTS_RECEIVE[n]
address_offset : 0xB20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable subscription to IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN1 : Enable subscription to IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN2 : Enable subscription to IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN3 : Enable subscription to IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN4 : Enable subscription to IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN5 : Enable subscription to IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN6 : Enable subscription to IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN7 : Enable subscription to IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN8 : Enable subscription to IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN9 : Enable subscription to IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN10 : Enable subscription to IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN11 : Enable subscription to IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN12 : Enable subscription to IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN13 : Enable subscription to IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN14 : Enable subscription to IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
CHEN15 : Enable subscription to IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable events
1 : Enable
Enable events
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0xB4 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0xBB4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0xC Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: General purpose memory
address_offset : 0xC20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPMEM : General purpose memory
bits : 0 - 30 (31 bit)
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0xC54 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0xCDC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Trigger events on IPC channel enabled in SEND_CNF[n]
address_offset : 0xDC Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TASKS_SEND : Trigger events on IPC channel enabled in SEND_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
1 : Trigger
Trigger task
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0xDF0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0xE08 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Send event configuration for TASKS_SEND[n]
address_offset : 0xF34 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHEN0 : Enable broadcasting on IPC channel 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN1 : Enable broadcasting on IPC channel 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN2 : Enable broadcasting on IPC channel 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN3 : Enable broadcasting on IPC channel 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN4 : Enable broadcasting on IPC channel 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN5 : Enable broadcasting on IPC channel 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN6 : Enable broadcasting on IPC channel 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN7 : Enable broadcasting on IPC channel 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN8 : Enable broadcasting on IPC channel 8
bits : 8 - 7 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN9 : Enable broadcasting on IPC channel 9
bits : 9 - 8 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN10 : Enable broadcasting on IPC channel 10
bits : 10 - 9 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN11 : Enable broadcasting on IPC channel 11
bits : 11 - 10 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN12 : Enable broadcasting on IPC channel 12
bits : 12 - 11 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN13 : Enable broadcasting on IPC channel 13
bits : 13 - 12 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN14 : Enable broadcasting on IPC channel 14
bits : 14 - 13 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
CHEN15 : Enable broadcasting on IPC channel 15
bits : 15 - 14 (0 bit)
Enumeration:
0 : Disable
Disable broadcast
1 : Enable
Enable broadcast
End of enumeration elements list.
Description collection: Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
address_offset : 0xF38 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVENTS_RECEIVE : Event received on one or more of the enabled IPC channels in RECEIVE_CNF[n]
bits : 0 - -1 (0 bit)
Enumeration:
0 : NotGenerated
Event not generated
1 : Generated
Event generated
End of enumeration elements list.
Description collection: Publish configuration for event RECEIVE[n]
address_offset : 0xF90 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIDX : DPPI channel that event RECEIVE[n] will publish to.
bits : 0 - 6 (7 bit)
EN :
bits : 31 - 30 (0 bit)
Enumeration:
0 : Disabled
Disable publishing
1 : Enabled
Enable publishing
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.