\n
address_offset : 0x0 Bytes (0x0)
size : 0xA byte (0x0)
mem_usage : registers
protection : not protected
Watchdog Control Register
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WDZST : WDZST
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : WDZST_0
Continue timer operation (Default).
0x1 : WDZST_1
Suspend the watchdog timer.
End of enumeration elements list.
WDBG : WDBG
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
0 : WDBG_0
Continue WDOG timer operation (Default).
0x1 : WDBG_1
Suspend the watchdog timer.
End of enumeration elements list.
WDE : WDE
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
0 : WDE_0
Disable the Watchdog (Default).
0x1 : WDE_1
Enable the Watchdog.
End of enumeration elements list.
WDT : WDT
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
0 : WDT_0
No effect on WDOG_B (Default).
0x1 : WDT_1
Assert WDOG_B upon a Watchdog Time-out event.
End of enumeration elements list.
SRS : SRS
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
0 : SRS_0
Assert system reset signal.
0x1 : SRS_1
No effect on the system (Default).
End of enumeration elements list.
WDA : WDA
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
0 : WDA_0
Assert WDOG_B output.
0x1 : WDA_1
No effect on system (Default).
End of enumeration elements list.
SRE : software reset extension, an option way to generate software reset
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
0 : SRE_0
using original way to generate software reset (default)
0x1 : SRE_1
using new way to generate software reset.
End of enumeration elements list.
WDW : WDW
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
0 : WDW_0
Continue WDOG timer operation (Default).
0x1 : WDW_1
Suspend WDOG timer operation.
End of enumeration elements list.
WT : WT
bits : 8 - 15 (8 bit)
access : read-write
Enumeration:
0 : WT_0
- 0.5 Seconds (Default).
0x1 : WT_1
- 1.0 Seconds.
0x2 : WT_2
- 1.5 Seconds.
0x3 : WT_3
- 2.0 Seconds.
0xFF : WT_255
- 128 Seconds.
End of enumeration elements list.
Watchdog Service Register
address_offset : 0x2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WSR : WSR
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0x5555 : WSR_21845
Write to the Watchdog Service Register (WDOG_WSR).
0xAAAA : WSR_43690
Write to the Watchdog Service Register (WDOG_WSR).
End of enumeration elements list.
Watchdog Reset Status Register
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SFTW : SFTW
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : SFTW_0
Reset is not the result of a software reset.
0x1 : SFTW_1
Reset is the result of a software reset.
End of enumeration elements list.
TOUT : TOUT
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
0 : TOUT_0
Reset is not the result of a WDOG timeout.
0x1 : TOUT_1
Reset is the result of a WDOG timeout.
End of enumeration elements list.
POR : POR
bits : 4 - 4 (1 bit)
access : read-only
Enumeration:
0 : POR_0
Reset is not the result of a power on reset.
0x1 : POR_1
Reset is the result of a power on reset.
End of enumeration elements list.
Watchdog Interrupt Control Register
address_offset : 0x6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WICT : WICT
bits : 0 - 7 (8 bit)
access : read-write
Enumeration:
0 : WICT_0
WICT[7:0] = Time duration between interrupt and time-out is 0 seconds.
0x1 : WICT_1
WICT[7:0] = Time duration between interrupt and time-out is 0.5 seconds.
0x4 : WICT_4
WICT[7:0] = Time duration between interrupt and time-out is 2 seconds (Default).
0xFF : WICT_255
WICT[7:0] = Time duration between interrupt and time-out is 127.5 seconds.
End of enumeration elements list.
WTIS : WTIS
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
0 : WTIS_0
No interrupt has occurred (Default).
0x1 : WTIS_1
Interrupt has occurred
End of enumeration elements list.
WIE : WIE
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
0 : WIE_0
Disable Interrupt (Default).
0x1 : WIE_1
Enable Interrupt.
End of enumeration elements list.
Watchdog Miscellaneous Control Register
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDE : PDE
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : PDE_0
Power Down Counter of WDOG is disabled.
0x1 : PDE_1
Power Down Counter of WDOG is enabled (Default).
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.