\n
address_offset : 0x0 Bytes (0x0)
size : 0x1C byte (0x0)
mem_usage : registers
protection : not protected
802.15.4 DEMOD CORRELLATOR CONTROL
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CORR_VT : CORR_VT
bits : 0 - 7 (8 bit)
access : read-write
CORR_NVAL : CORR_NVAL
bits : 8 - 10 (3 bit)
access : read-write
MAX_CORR_EN : MAX_CORR_EN
bits : 11 - 11 (1 bit)
access : read-write
ZBDEM_CLK_ON : Force 802.15.4 Demodulator Clock On
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Normal Operation
#1 : 1
Force 802.15.4 Demodulator Clock On (debug purposes only)
End of enumeration elements list.
RX_MAX_CORR : RX_MAX_CORR
bits : 16 - 23 (8 bit)
access : read-only
RX_MAX_PREAMBLE : RX_MAX_PREAMBLE
bits : 24 - 31 (8 bit)
access : read-only
802.15.4 CCA/LQI SOURCE
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CCA1_FROM_RX_DIG : Selects the Source of CCA1 (Clear Channel Assessment Mode 1) Information Provided to the 802.15.4 Link Layer
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Use the CCA1 information computed internally in the 802.15.4 Demod
#1 : 1
Use the CCA1 information computed by the RX Digital
End of enumeration elements list.
LQI_FROM_RX_DIG : Selects the Source of LQI (Link Quality Indicator) Information Provided to the 802.15.4 Link Layer
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Use the LQI information computed internally in the 802.15.4 Demod
#1 : 1
Use the LQI information computed by the RX Digital
End of enumeration elements list.
LQI_START_AT_SFD : Select Start Point for LQI Computation
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
Start LQI computation at Preamble Detection (similar to previous Freescale 802.15.4 products)
#1 : 1
Start LQI computation at SFD (Start of Frame Delimiter) Detection
End of enumeration elements list.
FAD CORRELATOR THRESHOLD
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FAD_THR : FAD_THR
bits : 0 - 7 (8 bit)
access : read-write
802.15.4 AFC STATUS
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AFC_EN : AFC_EN
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
AFC is disabled
#1 : 1
AFC is enabled
End of enumeration elements list.
DCD_EN : DCD_EN
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
NCD Mode (default)
#1 : 1
DCD Mode
End of enumeration elements list.
AFC_OUT : AFC_OUT
bits : 8 - 12 (5 bit)
access : read-only
802.15.4 DEMOD PN TYPE
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PN_TYPE : PN_TYPE
bits : 0 - 0 (1 bit)
access : read-write
TX_INV : TX_INV
bits : 1 - 1 (1 bit)
access : read-write
802.15.4 DEMOD PN CODE
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PN_LSB : PN_LSB
bits : 0 - 15 (16 bit)
access : read-write
PN_MSB : PN_MSB
bits : 16 - 31 (16 bit)
access : read-write
802.15.4 DEMOD SYMBOL SYNC CONTROL
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SYNC_PER : Symbol Sync Tracking Period
bits : 0 - 2 (3 bit)
access : read-write
TRACK_ENABLE : TRACK_ENABLE
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
symbol timing synchronization tracking disabled in Rx frontend
#1 : 1
symbol timing synchronization tracking enabled in Rx frontend (default)
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.