\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
General Purpose Input/Output Data Out This register is used to set data on the pads assigned to AUX
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
General Purpose Input Output Data Out Clear Strobes for clearing output data register bits
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
General Purpose Input Output Data Out Toggle Strobes for toggling output data register bits
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
General Purpose Input Output Input Enable
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
Input Output Mode Controls pull-up pull-down and output mode for the IO pins assigned to AUX
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO0 : IO0
bits : 0 - 1 (2 bit)
IO1 : IO1
bits : 2 - 5 (4 bit)
IO2 : IO2
bits : 4 - 9 (6 bit)
IO3 : IO3
bits : 6 - 13 (8 bit)
IO4 : IO4
bits : 8 - 17 (10 bit)
IO5 : IO5
bits : 10 - 21 (12 bit)
IO6 : IO6
bits : 12 - 25 (14 bit)
IO7 : IO7
bits : 14 - 29 (16 bit)
General Purpose Input Output Data In
address_offset : 0x8 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
General Purpose Input Output Data Out Set Strobes for setting output data register bits
address_offset : 0xC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IO7_0 : IO7_0
bits : 0 - 7 (8 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.