\n

AUX_AIODIO0

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

GPIODOUT

GPIODOUTCLR

GPIODOUTTGL

GPIODIE

IOMODE

GPIODIN

GPIODOUTSET


GPIODOUT

General Purpose Input/Output Data Out This register is used to set data on the pads assigned to AUX
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPIODOUT GPIODOUT read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)


GPIODOUTCLR

General Purpose Input Output Data Out Clear Strobes for clearing output data register bits
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPIODOUTCLR GPIODOUTCLR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)


GPIODOUTTGL

General Purpose Input Output Data Out Toggle Strobes for toggling output data register bits
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPIODOUTTGL GPIODOUTTGL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)


GPIODIE

General Purpose Input Output Input Enable
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPIODIE GPIODIE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)


IOMODE

Input Output Mode Controls pull-up pull-down and output mode for the IO pins assigned to AUX
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IOMODE IOMODE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO0 IO1 IO2 IO3 IO4 IO5 IO6 IO7

IO0 : IO0
bits : 0 - 1 (2 bit)

IO1 : IO1
bits : 2 - 5 (4 bit)

IO2 : IO2
bits : 4 - 9 (6 bit)

IO3 : IO3
bits : 6 - 13 (8 bit)

IO4 : IO4
bits : 8 - 17 (10 bit)

IO5 : IO5
bits : 10 - 21 (12 bit)

IO6 : IO6
bits : 12 - 25 (14 bit)

IO7 : IO7
bits : 14 - 29 (16 bit)


GPIODIN

General Purpose Input Output Data In
address_offset : 0x8 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0

GPIODIN GPIODIN read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)


GPIODOUTSET

General Purpose Input Output Data Out Set Strobes for setting output data register bits
address_offset : 0xC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPIODOUTSET GPIODOUTSET read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IO7_0

IO7_0 : IO7_0
bits : 0 - 7 (8 bit)



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.