\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : ACIFC Enable
bits : 0 - 0 (1 bit)
EVENTEN : Peripheral Event Trigger Enable
bits : 1 - 1 (1 bit)
USTART : User Start Single Comparison
bits : 4 - 4 (1 bit)
ESTART : Peripheral Event Start Single Comparison
bits : 5 - 5 (1 bit)
ACTEST : Analog Comparator Test Mode
bits : 7 - 7 (1 bit)
Interrupt Enable Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
ACINT0 : AC0 Interrupt Enable
bits : 0 - 0 (1 bit)
access : write-only
SUTINT0 : AC0 Startup Time Interrupt Enable
bits : 1 - 1 (1 bit)
access : write-only
ACINT1 : AC1 Interrupt Enable
bits : 2 - 2 (1 bit)
access : write-only
SUTINT1 : AC1 Startup Time Interrupt Enable
bits : 3 - 3 (1 bit)
access : write-only
ACINT2 : AC2 Interrupt Enable
bits : 4 - 4 (1 bit)
access : write-only
SUTINT2 : AC2 Startup Time Interrupt Enable
bits : 5 - 5 (1 bit)
access : write-only
ACINT3 : AC3 Interrupt Enable
bits : 6 - 6 (1 bit)
access : write-only
SUTINT3 : AC3 Startup Time Interrupt Enable
bits : 7 - 7 (1 bit)
access : write-only
ACINT4 : AC4 Interrupt Enable
bits : 8 - 8 (1 bit)
access : write-only
SUTINT4 : AC4 Startup Time Interrupt Enable
bits : 9 - 9 (1 bit)
access : write-only
ACINT5 : AC5 Interrupt Enable
bits : 10 - 10 (1 bit)
access : write-only
SUTINT5 : AC5 Startup Time Interrupt Enable
bits : 11 - 11 (1 bit)
access : write-only
ACINT6 : AC6 Interrupt Enable
bits : 12 - 12 (1 bit)
access : write-only
SUTINT6 : AC6 Startup Time Interrupt Enable
bits : 13 - 13 (1 bit)
access : write-only
ACINT7 : AC7 Interrupt Enable
bits : 14 - 14 (1 bit)
access : write-only
SUTINT7 : AC7 Startup Time Interrupt Enable
bits : 15 - 15 (1 bit)
access : write-only
WFINT0 : Window0 Mode Interrupt Enable
bits : 24 - 24 (1 bit)
access : write-only
WFINT1 : Window1 Mode Interrupt Enable
bits : 25 - 25 (1 bit)
access : write-only
WFINT2 : Window2 Mode Interrupt Enable
bits : 26 - 26 (1 bit)
access : write-only
WFINT3 : Window3 Mode Interrupt Enable
bits : 27 - 27 (1 bit)
access : write-only
Window configuration Register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WIS : Window Mode Interrupt Settings
bits : 0 - 2 (3 bit)
WEVSRC : Peripheral Event Sourse Selection for Window Mode
bits : 8 - 10 (3 bit)
WEVEN : Window Peripheral Event Enable
bits : 11 - 11 (1 bit)
WFEN : Window Mode Enable
bits : 16 - 16 (1 bit)
Interrupt Disable Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
ACINT0 : AC0 Interrupt Disable
bits : 0 - 0 (1 bit)
access : write-only
SUTINT0 : AC0 Startup Time Interrupt Disable
bits : 1 - 1 (1 bit)
access : write-only
ACINT1 : AC1 Interrupt Disable
bits : 2 - 2 (1 bit)
access : write-only
SUTINT1 : AC1 Startup Time Interrupt Disable
bits : 3 - 3 (1 bit)
access : write-only
ACINT2 : AC2 Interrupt Disable
bits : 4 - 4 (1 bit)
access : write-only
SUTINT2 : AC2 Startup Time Interrupt Disable
bits : 5 - 5 (1 bit)
access : write-only
ACINT3 : AC3 Interrupt Disable
bits : 6 - 6 (1 bit)
access : write-only
SUTINT3 : AC3 Startup Time Interrupt Disable
bits : 7 - 7 (1 bit)
access : write-only
ACINT4 : AC4 Interrupt Disable
bits : 8 - 8 (1 bit)
access : write-only
SUTINT4 : AC4 Startup Time Interrupt Disable
bits : 9 - 9 (1 bit)
access : write-only
ACINT5 : AC5 Interrupt Disable
bits : 10 - 10 (1 bit)
access : write-only
SUTINT5 : AC5 Startup Time Interrupt Disable
bits : 11 - 11 (1 bit)
access : write-only
ACINT6 : AC6 Interrupt Disable
bits : 12 - 12 (1 bit)
access : write-only
SUTINT6 : AC6 Startup Time Interrupt Disable
bits : 13 - 13 (1 bit)
access : write-only
ACINT7 : AC7 Interrupt Disable
bits : 14 - 14 (1 bit)
access : write-only
SUTINT7 : AC7 Startup Time Interrupt Disable
bits : 15 - 15 (1 bit)
access : write-only
WFINT0 : Window0 Mode Interrupt Disable
bits : 24 - 24 (1 bit)
access : write-only
WFINT1 : Window1 Mode Interrupt Disable
bits : 25 - 25 (1 bit)
access : write-only
WFINT2 : Window2 Mode Interrupt Disable
bits : 26 - 26 (1 bit)
access : write-only
WFINT3 : Window3 Mode Interrupt Disable
bits : 27 - 27 (1 bit)
access : write-only
Interrupt Mask Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ACINT0 : AC0 Interrupt Mask
bits : 0 - 0 (1 bit)
access : read-only
SUTINT0 : AC0 Startup Time Interrupt Mask
bits : 1 - 1 (1 bit)
access : read-only
ACINT1 : AC1 Interrupt Mask
bits : 2 - 2 (1 bit)
access : read-only
SUTINT1 : AC1 Startup Time Interrupt Mask
bits : 3 - 3 (1 bit)
access : read-only
ACINT2 : AC2 Interrupt Mask
bits : 4 - 4 (1 bit)
access : read-only
SUTINT2 : AC2 Startup Time Interrupt Mask
bits : 5 - 5 (1 bit)
access : read-only
ACINT3 : AC3 Interrupt Mask
bits : 6 - 6 (1 bit)
access : read-only
SUTINT3 : AC3 Startup Time Interrupt Mask
bits : 7 - 7 (1 bit)
access : read-only
ACINT4 : AC4 Interrupt Mask
bits : 8 - 8 (1 bit)
access : read-only
SUTINT4 : AC4 Startup Time Interrupt Mask
bits : 9 - 9 (1 bit)
access : read-only
ACINT5 : AC5 Interrupt Mask
bits : 10 - 10 (1 bit)
access : read-only
SUTINT5 : AC5 Startup Time Interrupt Mask
bits : 11 - 11 (1 bit)
access : read-only
ACINT6 : AC6 Interrupt Mask
bits : 12 - 12 (1 bit)
access : read-only
SUTINT6 : AC6 Startup Time Interrupt Mask
bits : 13 - 13 (1 bit)
access : read-only
ACINT7 : AC7 Interrupt Mask
bits : 14 - 14 (1 bit)
access : read-only
SUTINT7 : AC7 Startup Time Interrupt Mask
bits : 15 - 15 (1 bit)
access : read-only
WFINT0 : Window0 Mode Interrupt Mask
bits : 24 - 24 (1 bit)
access : read-only
WFINT1 : Window1 Mode Interrupt Mask
bits : 25 - 25 (1 bit)
access : read-only
WFINT2 : Window2 Mode Interrupt Mask
bits : 26 - 26 (1 bit)
access : read-only
WFINT3 : Window3 Mode Interrupt Mask
bits : 27 - 27 (1 bit)
access : read-only
Window configuration Register
address_offset : 0x184 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WIS : Window Mode Interrupt Settings
bits : 0 - 2 (3 bit)
WEVSRC : Peripheral Event Sourse Selection for Window Mode
bits : 8 - 10 (3 bit)
WEVEN : Window Peripheral Event Enable
bits : 11 - 11 (1 bit)
WFEN : Window Mode Enable
bits : 16 - 16 (1 bit)
AC Configuration Register
address_offset : 0x1A0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
Interrupt Status Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ACINT0 : AC0 Interrupt Status
bits : 0 - 0 (1 bit)
access : read-only
SUTINT0 : AC0 Startup Time Interrupt Status
bits : 1 - 1 (1 bit)
access : read-only
ACINT1 : AC1 Interrupt Status
bits : 2 - 2 (1 bit)
access : read-only
SUTINT1 : AC1 Startup Time Interrupt Status
bits : 3 - 3 (1 bit)
access : read-only
ACINT2 : AC2 Interrupt Status
bits : 4 - 4 (1 bit)
access : read-only
SUTINT2 : AC2 Startup Time Interrupt Status
bits : 5 - 5 (1 bit)
access : read-only
ACINT3 : AC3 Interrupt Status
bits : 6 - 6 (1 bit)
access : read-only
SUTINT3 : AC3 Startup Time Interrupt Status
bits : 7 - 7 (1 bit)
access : read-only
ACINT4 : AC4 Interrupt Status
bits : 8 - 8 (1 bit)
access : read-only
SUTINT4 : AC4 Startup Time Interrupt Status
bits : 9 - 9 (1 bit)
access : read-only
ACINT5 : AC5 Interrupt Status
bits : 10 - 10 (1 bit)
access : read-only
SUTINT5 : AC5 Startup Time Interrupt Status
bits : 11 - 11 (1 bit)
access : read-only
ACINT6 : AC6 Interrupt Status
bits : 12 - 12 (1 bit)
access : read-only
SUTINT6 : AC6 Startup Time Interrupt Status
bits : 13 - 13 (1 bit)
access : read-only
ACINT7 : AC7 Interrupt Status
bits : 14 - 14 (1 bit)
access : read-only
SUTINT7 : AC7 Startup Time Interrupt Status
bits : 15 - 15 (1 bit)
access : read-only
WFINT0 : Window0 Mode Interrupt Status
bits : 24 - 24 (1 bit)
access : read-only
WFINT1 : Window1 Mode Interrupt Status
bits : 25 - 25 (1 bit)
access : read-only
WFINT2 : Window2 Mode Interrupt Status
bits : 26 - 26 (1 bit)
access : read-only
WFINT3 : Window3 Mode Interrupt Status
bits : 27 - 27 (1 bit)
access : read-only
Interrupt Status Clear Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
ACINT0 : AC0 Interrupt Status Clear
bits : 0 - 0 (1 bit)
access : write-only
SUTINT0 : AC0 Startup Time Interrupt Status Clear
bits : 1 - 1 (1 bit)
access : write-only
ACINT1 : AC1 Interrupt Status Clear
bits : 2 - 2 (1 bit)
access : write-only
SUTINT1 : AC1 Startup Time Interrupt Status Clear
bits : 3 - 3 (1 bit)
access : write-only
ACINT2 : AC2 Interrupt Status Clear
bits : 4 - 4 (1 bit)
access : write-only
SUTINT2 : AC2 Startup Time Interrupt Status Clear
bits : 5 - 5 (1 bit)
access : write-only
ACINT3 : AC3 Interrupt Status Clear
bits : 6 - 6 (1 bit)
access : write-only
SUTINT3 : AC3 Startup Time Interrupt Status Clear
bits : 7 - 7 (1 bit)
access : write-only
ACINT4 : AC4 Interrupt Status Clear
bits : 8 - 8 (1 bit)
access : write-only
SUTINT4 : AC4 Startup Time Interrupt Status Clear
bits : 9 - 9 (1 bit)
access : write-only
ACINT5 : AC5 Interrupt Status Clear
bits : 10 - 10 (1 bit)
access : write-only
SUTINT5 : AC5 Startup Time Interrupt Status Clear
bits : 11 - 11 (1 bit)
access : write-only
ACINT6 : AC6 Interrupt Status Clear
bits : 12 - 12 (1 bit)
access : write-only
SUTINT6 : AC6 Startup Time Interrupt Status Clear
bits : 13 - 13 (1 bit)
access : write-only
ACINT7 : AC7 Interrupt Status Clear
bits : 14 - 14 (1 bit)
access : write-only
SUTINT7 : AC7 Startup Time Interrupt Status Clear
bits : 15 - 15 (1 bit)
access : write-only
WFINT0 : Window0 Mode Interrupt Status Clear
bits : 24 - 24 (1 bit)
access : write-only
WFINT1 : Window1 Mode Interrupt Status Clear
bits : 25 - 25 (1 bit)
access : write-only
WFINT2 : Window2 Mode Interrupt Status Clear
bits : 26 - 26 (1 bit)
access : write-only
WFINT3 : Window3 Mode Interrupt Status Clear
bits : 27 - 27 (1 bit)
access : write-only
Window configuration Register
address_offset : 0x20C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WIS : Window Mode Interrupt Settings
bits : 0 - 2 (3 bit)
WEVSRC : Peripheral Event Sourse Selection for Window Mode
bits : 8 - 10 (3 bit)
WEVEN : Window Peripheral Event Enable
bits : 11 - 11 (1 bit)
WFEN : Window Mode Enable
bits : 16 - 16 (1 bit)
Test Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACTEST0 : AC0 Output Override Value
bits : 0 - 0 (1 bit)
ACTEST1 : AC1 Output Override Value
bits : 1 - 1 (1 bit)
ACTEST2 : AC2 Output Override Value
bits : 2 - 2 (1 bit)
ACTEST3 : AC3 Output Override Value
bits : 3 - 3 (1 bit)
ACTEST4 : AC4 Output Override Value
bits : 4 - 4 (1 bit)
ACTEST5 : AC5 Output Override Value
bits : 5 - 5 (1 bit)
ACTEST6 : AC6 Output Override Value
bits : 6 - 6 (1 bit)
ACTEST7 : AC7 Output Override Value
bits : 7 - 7 (1 bit)
AC Configuration Register
address_offset : 0x274 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
Window configuration Register
address_offset : 0x298 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WIS : Window Mode Interrupt Settings
bits : 0 - 2 (3 bit)
WEVSRC : Peripheral Event Sourse Selection for Window Mode
bits : 8 - 10 (3 bit)
WEVEN : Window Peripheral Event Enable
bits : 11 - 11 (1 bit)
WFEN : Window Mode Enable
bits : 16 - 16 (1 bit)
Parameter Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ACIMPL0 : Analog Comparator 0 Implemented
bits : 0 - 0 (1 bit)
access : read-only
ACIMPL1 : Analog Comparator 1 Implemented
bits : 1 - 1 (1 bit)
access : read-only
ACIMPL2 : Analog Comparator 2 Implemented
bits : 2 - 2 (1 bit)
access : read-only
ACIMPL3 : Analog Comparator 3 Implemented
bits : 3 - 3 (1 bit)
access : read-only
ACIMPL4 : Analog Comparator 4 Implemented
bits : 4 - 4 (1 bit)
access : read-only
ACIMPL5 : Analog Comparator 5 Implemented
bits : 5 - 5 (1 bit)
access : read-only
ACIMPL6 : Analog Comparator 6 Implemented
bits : 6 - 6 (1 bit)
access : read-only
ACIMPL7 : Analog Comparator 7 Implemented
bits : 7 - 7 (1 bit)
access : read-only
WIMPL0 : Window0 Mode Implemented
bits : 16 - 16 (1 bit)
access : read-only
WIMPL1 : Window1 Mode Implemented
bits : 17 - 17 (1 bit)
access : read-only
WIMPL2 : Window2 Mode Implemented
bits : 18 - 18 (1 bit)
access : read-only
WIMPL3 : Window3 Mode Implemented
bits : 19 - 19 (1 bit)
access : read-only
Version Register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
VERSION : Version Number
bits : 0 - 11 (12 bit)
access : read-only
VARIANT : Variant Number
bits : 16 - 19 (4 bit)
access : read-only
AC Configuration Register
address_offset : 0x34C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
Status Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ACCS0 : AC0 Current Comparison Status
bits : 0 - 0 (1 bit)
access : read-only
ACRDY0 : AC0 Ready
bits : 1 - 1 (1 bit)
access : read-only
ACCS1 : AC1 Current Comparison Status
bits : 2 - 2 (1 bit)
access : read-only
ACRDY1 : AC1 Ready
bits : 3 - 3 (1 bit)
access : read-only
ACCS2 : AC2 Current Comparison Status
bits : 4 - 4 (1 bit)
access : read-only
ACRDY2 : AC2 Ready
bits : 5 - 5 (1 bit)
access : read-only
ACCS3 : AC3 Current Comparison Status
bits : 6 - 6 (1 bit)
access : read-only
ACRDY3 : AC3 Ready
bits : 7 - 7 (1 bit)
access : read-only
ACCS4 : AC4 Current Comparison Status
bits : 8 - 8 (1 bit)
access : read-only
ACRDY4 : AC4 Ready
bits : 9 - 9 (1 bit)
access : read-only
ACCS5 : AC5 Current Comparison Status
bits : 10 - 10 (1 bit)
access : read-only
ACRDY5 : AC5 Ready
bits : 11 - 11 (1 bit)
access : read-only
ACCS6 : AC6 Current Comparison Status
bits : 12 - 12 (1 bit)
access : read-only
ACRDY6 : AC6 Ready
bits : 13 - 13 (1 bit)
access : read-only
ACCS7 : AC7 Current Comparison Status
bits : 14 - 14 (1 bit)
access : read-only
ACRDY7 : AC7 Ready
bits : 15 - 15 (1 bit)
access : read-only
WFCS0 : Window0 Mode Current Status
bits : 24 - 24 (1 bit)
access : read-only
WFCS1 : Window1 Mode Current Status
bits : 25 - 25 (1 bit)
access : read-only
WFCS2 : Window2 Mode Current Status
bits : 26 - 26 (1 bit)
access : read-only
WFCS3 : Window3 Mode Current Status
bits : 27 - 27 (1 bit)
access : read-only
AC Configuration Register
address_offset : 0x428 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
AC Configuration Register
address_offset : 0x508 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
AC Configuration Register
address_offset : 0x5EC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
AC Configuration Register
address_offset : 0x6D4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
AC Configuration Register
address_offset : 0x7C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IS : Interupt Settings
bits : 0 - 1 (2 bit)
MODE : Analog Comparator Mode
bits : 4 - 5 (2 bit)
INSELN : Negative Input Select
bits : 8 - 9 (2 bit)
EVENN : Peripheral Event Enable Negative
bits : 16 - 16 (1 bit)
EVENP : Peripheral Event Enable Positive
bits : 17 - 17 (1 bit)
HYS : Hysteresis Voltage Value
bits : 24 - 25 (2 bit)
FAST : Fast Mode Enable
bits : 26 - 26 (1 bit)
ALWAYSON : Always On
bits : 27 - 27 (1 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.