\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
Flash Controller Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRDY : Flash Ready Interrupt Enable
bits : 0 - 0 (1 bit)
Enumeration: FRDYSelect
0x0 : 0
Flash Ready does not generate an interrupt
0x1 : 1
Flash Ready generates an interrupt
End of enumeration elements list.
LOCKE : Lock Error Interrupt Enable
bits : 2 - 2 (1 bit)
Enumeration: LOCKESelect
0x0 : 0
Lock Error does not generate an interrupt
0x1 : 1
Lock Error generates an interrupt
End of enumeration elements list.
PROGE : Programming Error Interrupt Enable
bits : 3 - 3 (1 bit)
Enumeration: PROGESelect
0x0 : 0
Programming Error does not generate an interrupt
0x1 : 1
Programming Error generates an interrupt
End of enumeration elements list.
FWS : Flash Wait State
bits : 6 - 6 (1 bit)
Enumeration: FWSSelect
0x0 : 0
The flash is read with 0 wait states
0x1 : 1
The flash is read with 1 wait states
End of enumeration elements list.
WS1OPT : Wait State 1 Optimization
bits : 7 - 7 (1 bit)
Flash Controller Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRDY : Flash Ready Interrupt Enable
bits : 0 - 0 (1 bit)
Enumeration: FRDYSelect
0x0 : 0
Flash Ready does not generate an interrupt
0x1 : 1
Flash Ready generates an interrupt
End of enumeration elements list.
LOCKE : Lock Error Interrupt Enable
bits : 2 - 2 (1 bit)
Enumeration: LOCKESelect
0x0 : 0
Lock Error does not generate an interrupt
0x1 : 1
Lock Error generates an interrupt
End of enumeration elements list.
PROGE : Programming Error Interrupt Enable
bits : 3 - 3 (1 bit)
Enumeration: PROGESelect
0x0 : 0
Programming Error does not generate an interrupt
0x1 : 1
Programming Error generates an interrupt
End of enumeration elements list.
FWS : Flash Wait State
bits : 6 - 6 (1 bit)
Enumeration: FWSSelect
0x0 : 0
The flash is read with 0 wait states
0x1 : 1
The flash is read with 1 wait states
End of enumeration elements list.
WS1OPT : Wait State 1 Optimization
bits : 7 - 7 (1 bit)
Flash Controller Version Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
VERSION : Version Number
bits : 0 - 11 (12 bit)
access : read-only
VARIANT : Variant Number
bits : 16 - 19 (4 bit)
access : read-only
Flash Controller Version Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
VERSION : Version Number
bits : 0 - 11 (12 bit)
access : read-only
VARIANT : Variant Number
bits : 16 - 19 (4 bit)
access : read-only
Flash Controller General Purpose Fuse Register High
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPF32 : General Purpose Fuse 32
bits : 0 - 0 (1 bit)
access : read-only
GPF33 : General Purpose Fuse 33
bits : 1 - 1 (1 bit)
access : read-only
GPF34 : General Purpose Fuse 34
bits : 2 - 2 (1 bit)
access : read-only
GPF35 : General Purpose Fuse 35
bits : 3 - 3 (1 bit)
access : read-only
GPF36 : General Purpose Fuse 36
bits : 4 - 4 (1 bit)
access : read-only
GPF37 : General Purpose Fuse 37
bits : 5 - 5 (1 bit)
access : read-only
GPF38 : General Purpose Fuse 38
bits : 6 - 6 (1 bit)
access : read-only
GPF39 : General Purpose Fuse 39
bits : 7 - 7 (1 bit)
access : read-only
GPF40 : General Purpose Fuse 40
bits : 8 - 8 (1 bit)
access : read-only
GPF41 : General Purpose Fuse 41
bits : 9 - 9 (1 bit)
access : read-only
GPF42 : General Purpose Fuse 42
bits : 10 - 10 (1 bit)
access : read-only
GPF43 : General Purpose Fuse 43
bits : 11 - 11 (1 bit)
access : read-only
GPF44 : General Purpose Fuse 44
bits : 12 - 12 (1 bit)
access : read-only
GPF45 : General Purpose Fuse 45
bits : 13 - 13 (1 bit)
access : read-only
GPF46 : General Purpose Fuse 46
bits : 14 - 14 (1 bit)
access : read-only
GPF47 : General Purpose Fuse 47
bits : 15 - 15 (1 bit)
access : read-only
GPF48 : General Purpose Fuse 48
bits : 16 - 16 (1 bit)
access : read-only
GPF49 : General Purpose Fuse 49
bits : 17 - 17 (1 bit)
access : read-only
GPF50 : General Purpose Fuse 50
bits : 18 - 18 (1 bit)
access : read-only
GPF51 : General Purpose Fuse 51
bits : 19 - 19 (1 bit)
access : read-only
GPF52 : General Purpose Fuse 52
bits : 20 - 20 (1 bit)
access : read-only
GPF53 : General Purpose Fuse 53
bits : 21 - 21 (1 bit)
access : read-only
GPF54 : General Purpose Fuse 54
bits : 22 - 22 (1 bit)
access : read-only
GPF55 : General Purpose Fuse 55
bits : 23 - 23 (1 bit)
access : read-only
GPF56 : General Purpose Fuse 56
bits : 24 - 24 (1 bit)
access : read-only
GPF57 : General Purpose Fuse 57
bits : 25 - 25 (1 bit)
access : read-only
GPF58 : General Purpose Fuse 58
bits : 26 - 26 (1 bit)
access : read-only
GPF59 : General Purpose Fuse 59
bits : 27 - 27 (1 bit)
access : read-only
GPF60 : General Purpose Fuse 60
bits : 28 - 28 (1 bit)
access : read-only
GPF61 : General Purpose Fuse 61
bits : 29 - 29 (1 bit)
access : read-only
GPF62 : General Purpose Fuse 62
bits : 30 - 30 (1 bit)
access : read-only
GPF63 : General Purpose Fuse 63
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller General Purpose Fuse Register High
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPF32 : General Purpose Fuse 32
bits : 0 - 0 (1 bit)
access : read-only
GPF33 : General Purpose Fuse 33
bits : 1 - 1 (1 bit)
access : read-only
GPF34 : General Purpose Fuse 34
bits : 2 - 2 (1 bit)
access : read-only
GPF35 : General Purpose Fuse 35
bits : 3 - 3 (1 bit)
access : read-only
GPF36 : General Purpose Fuse 36
bits : 4 - 4 (1 bit)
access : read-only
GPF37 : General Purpose Fuse 37
bits : 5 - 5 (1 bit)
access : read-only
GPF38 : General Purpose Fuse 38
bits : 6 - 6 (1 bit)
access : read-only
GPF39 : General Purpose Fuse 39
bits : 7 - 7 (1 bit)
access : read-only
GPF40 : General Purpose Fuse 40
bits : 8 - 8 (1 bit)
access : read-only
GPF41 : General Purpose Fuse 41
bits : 9 - 9 (1 bit)
access : read-only
GPF42 : General Purpose Fuse 42
bits : 10 - 10 (1 bit)
access : read-only
GPF43 : General Purpose Fuse 43
bits : 11 - 11 (1 bit)
access : read-only
GPF44 : General Purpose Fuse 44
bits : 12 - 12 (1 bit)
access : read-only
GPF45 : General Purpose Fuse 45
bits : 13 - 13 (1 bit)
access : read-only
GPF46 : General Purpose Fuse 46
bits : 14 - 14 (1 bit)
access : read-only
GPF47 : General Purpose Fuse 47
bits : 15 - 15 (1 bit)
access : read-only
GPF48 : General Purpose Fuse 48
bits : 16 - 16 (1 bit)
access : read-only
GPF49 : General Purpose Fuse 49
bits : 17 - 17 (1 bit)
access : read-only
GPF50 : General Purpose Fuse 50
bits : 18 - 18 (1 bit)
access : read-only
GPF51 : General Purpose Fuse 51
bits : 19 - 19 (1 bit)
access : read-only
GPF52 : General Purpose Fuse 52
bits : 20 - 20 (1 bit)
access : read-only
GPF53 : General Purpose Fuse 53
bits : 21 - 21 (1 bit)
access : read-only
GPF54 : General Purpose Fuse 54
bits : 22 - 22 (1 bit)
access : read-only
GPF55 : General Purpose Fuse 55
bits : 23 - 23 (1 bit)
access : read-only
GPF56 : General Purpose Fuse 56
bits : 24 - 24 (1 bit)
access : read-only
GPF57 : General Purpose Fuse 57
bits : 25 - 25 (1 bit)
access : read-only
GPF58 : General Purpose Fuse 58
bits : 26 - 26 (1 bit)
access : read-only
GPF59 : General Purpose Fuse 59
bits : 27 - 27 (1 bit)
access : read-only
GPF60 : General Purpose Fuse 60
bits : 28 - 28 (1 bit)
access : read-only
GPF61 : General Purpose Fuse 61
bits : 29 - 29 (1 bit)
access : read-only
GPF62 : General Purpose Fuse 62
bits : 30 - 30 (1 bit)
access : read-only
GPF63 : General Purpose Fuse 63
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller General Purpose Fuse Register Low
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LOCK0 : Lock Bit 0
bits : 0 - 0 (1 bit)
access : read-only
LOCK1 : Lock Bit 1
bits : 1 - 1 (1 bit)
access : read-only
LOCK2 : Lock Bit 2
bits : 2 - 2 (1 bit)
access : read-only
LOCK3 : Lock Bit 3
bits : 3 - 3 (1 bit)
access : read-only
LOCK4 : Lock Bit 4
bits : 4 - 4 (1 bit)
access : read-only
LOCK5 : Lock Bit 5
bits : 5 - 5 (1 bit)
access : read-only
LOCK6 : Lock Bit 6
bits : 6 - 6 (1 bit)
access : read-only
LOCK7 : Lock Bit 7
bits : 7 - 7 (1 bit)
access : read-only
LOCK8 : Lock Bit 8
bits : 8 - 8 (1 bit)
access : read-only
LOCK9 : Lock Bit 9
bits : 9 - 9 (1 bit)
access : read-only
LOCK10 : Lock Bit 10
bits : 10 - 10 (1 bit)
access : read-only
LOCK11 : Lock Bit 11
bits : 11 - 11 (1 bit)
access : read-only
LOCK12 : Lock Bit 12
bits : 12 - 12 (1 bit)
access : read-only
LOCK13 : Lock Bit 13
bits : 13 - 13 (1 bit)
access : read-only
LOCK14 : Lock Bit 14
bits : 14 - 14 (1 bit)
access : read-only
LOCK15 : Lock Bit 15
bits : 15 - 15 (1 bit)
access : read-only
GPF16 : General Purpose Fuse 16
bits : 16 - 16 (1 bit)
access : read-only
GPF17 : General Purpose Fuse 17
bits : 17 - 17 (1 bit)
access : read-only
GPF18 : General Purpose Fuse 18
bits : 18 - 18 (1 bit)
access : read-only
GPF19 : General Purpose Fuse 19
bits : 19 - 19 (1 bit)
access : read-only
GPF20 : General Purpose Fuse 20
bits : 20 - 20 (1 bit)
access : read-only
GPF21 : General Purpose Fuse 21
bits : 21 - 21 (1 bit)
access : read-only
GPF22 : General Purpose Fuse 22
bits : 22 - 22 (1 bit)
access : read-only
GPF23 : General Purpose Fuse 23
bits : 23 - 23 (1 bit)
access : read-only
GPF24 : General Purpose Fuse 24
bits : 24 - 24 (1 bit)
access : read-only
GPF25 : General Purpose Fuse 25
bits : 25 - 25 (1 bit)
access : read-only
GPF26 : General Purpose Fuse 26
bits : 26 - 26 (1 bit)
access : read-only
GPF27 : General Purpose Fuse 27
bits : 27 - 27 (1 bit)
access : read-only
GPF28 : General Purpose Fuse 28
bits : 28 - 28 (1 bit)
access : read-only
GPF29 : General Purpose Fuse 29
bits : 29 - 29 (1 bit)
access : read-only
GPF30 : General Purpose Fuse 30
bits : 30 - 30 (1 bit)
access : read-only
GPF31 : General Purpose Fuse 31
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller General Purpose Fuse Register Low
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LOCK0 : Lock Bit 0
bits : 0 - 0 (1 bit)
access : read-only
LOCK1 : Lock Bit 1
bits : 1 - 1 (1 bit)
access : read-only
LOCK2 : Lock Bit 2
bits : 2 - 2 (1 bit)
access : read-only
LOCK3 : Lock Bit 3
bits : 3 - 3 (1 bit)
access : read-only
LOCK4 : Lock Bit 4
bits : 4 - 4 (1 bit)
access : read-only
LOCK5 : Lock Bit 5
bits : 5 - 5 (1 bit)
access : read-only
LOCK6 : Lock Bit 6
bits : 6 - 6 (1 bit)
access : read-only
LOCK7 : Lock Bit 7
bits : 7 - 7 (1 bit)
access : read-only
LOCK8 : Lock Bit 8
bits : 8 - 8 (1 bit)
access : read-only
LOCK9 : Lock Bit 9
bits : 9 - 9 (1 bit)
access : read-only
LOCK10 : Lock Bit 10
bits : 10 - 10 (1 bit)
access : read-only
LOCK11 : Lock Bit 11
bits : 11 - 11 (1 bit)
access : read-only
LOCK12 : Lock Bit 12
bits : 12 - 12 (1 bit)
access : read-only
LOCK13 : Lock Bit 13
bits : 13 - 13 (1 bit)
access : read-only
LOCK14 : Lock Bit 14
bits : 14 - 14 (1 bit)
access : read-only
LOCK15 : Lock Bit 15
bits : 15 - 15 (1 bit)
access : read-only
GPF16 : General Purpose Fuse 16
bits : 16 - 16 (1 bit)
access : read-only
GPF17 : General Purpose Fuse 17
bits : 17 - 17 (1 bit)
access : read-only
GPF18 : General Purpose Fuse 18
bits : 18 - 18 (1 bit)
access : read-only
GPF19 : General Purpose Fuse 19
bits : 19 - 19 (1 bit)
access : read-only
GPF20 : General Purpose Fuse 20
bits : 20 - 20 (1 bit)
access : read-only
GPF21 : General Purpose Fuse 21
bits : 21 - 21 (1 bit)
access : read-only
GPF22 : General Purpose Fuse 22
bits : 22 - 22 (1 bit)
access : read-only
GPF23 : General Purpose Fuse 23
bits : 23 - 23 (1 bit)
access : read-only
GPF24 : General Purpose Fuse 24
bits : 24 - 24 (1 bit)
access : read-only
GPF25 : General Purpose Fuse 25
bits : 25 - 25 (1 bit)
access : read-only
GPF26 : General Purpose Fuse 26
bits : 26 - 26 (1 bit)
access : read-only
GPF27 : General Purpose Fuse 27
bits : 27 - 27 (1 bit)
access : read-only
GPF28 : General Purpose Fuse 28
bits : 28 - 28 (1 bit)
access : read-only
GPF29 : General Purpose Fuse 29
bits : 29 - 29 (1 bit)
access : read-only
GPF30 : General Purpose Fuse 30
bits : 30 - 30 (1 bit)
access : read-only
GPF31 : General Purpose Fuse 31
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller Command Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMD : Command
bits : 0 - 5 (6 bit)
Enumeration: CMDSelect
0x0 : NOP
No Operation
0x1 : WP
Write Page
0x2 : EP
Erase Page
0x3 : CPB
Clear Page Buffer
0x4 : LP
Lock Region containing page
0x5 : UP
Unlock Region containing page
0x6 : EA
Erase All, including secuity and fuse bits
0x7 : WGPB
Write General-Purpose fuse Bit
0x8 : EGPB
Erase General-Purpose fuse Bit
0x9 : SSB
Set Security Bit
0xa : PGPFB
Program GPFuse Byte
0xb : EAGPF
Erase All GP Fuses
0xc : QPR
Quick Page Read
0xd : WUP
Write User Page
0xe : EUP
Erase User Page
0xf : QPRUP
Quick Page Read User Page
0x10 : HSEN
High Speed Mode Enable
0x11 : HSDIS
High Speed Mode Disable
End of enumeration elements list.
PAGEN : Page number
bits : 8 - 23 (16 bit)
KEY : Write protection key
bits : 24 - 31 (8 bit)
Enumeration: KEYSelect
0xa5 : KEY
None
End of enumeration elements list.
Flash Controller Command Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMD : Command
bits : 0 - 5 (6 bit)
Enumeration: CMDSelect
0x0 : NOP
No Operation
0x1 : WP
Write Page
0x2 : EP
Erase Page
0x3 : CPB
Clear Page Buffer
0x4 : LP
Lock Region containing page
0x5 : UP
Unlock Region containing page
0x6 : EA
Erase All, including secuity and fuse bits
0x7 : WGPB
Write General-Purpose fuse Bit
0x8 : EGPB
Erase General-Purpose fuse Bit
0x9 : SSB
Set Security Bit
0xa : PGPFB
Program GPFuse Byte
0xb : EAGPF
Erase All GP Fuses
0xc : QPR
Quick Page Read
0xd : WUP
Write User Page
0xe : EUP
Erase User Page
0xf : QPRUP
Quick Page Read User Page
0x10 : HSEN
High Speed Mode Enable
0x11 : HSDIS
High Speed Mode Disable
End of enumeration elements list.
PAGEN : Page number
bits : 8 - 23 (16 bit)
KEY : Write protection key
bits : 24 - 31 (8 bit)
Enumeration: KEYSelect
0xa5 : KEY
End of enumeration elements list.
Flash Controller Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRDY : Flash Ready Status
bits : 0 - 0 (1 bit)
access : read-only
LOCKE : Lock Error Status
bits : 2 - 2 (1 bit)
access : read-only
PROGE : Programming Error Status
bits : 3 - 3 (1 bit)
access : read-only
SECURITY : Security Bit Status
bits : 4 - 4 (1 bit)
access : read-only
QPRR : Quick Page Read Result
bits : 5 - 5 (1 bit)
access : read-only
HSMODE : High Speed Mode
bits : 6 - 6 (1 bit)
access : read-only
ECCERR : ECC Error Status
bits : 8 - 9 (2 bit)
access : read-only
Enumeration: ECCERRSelect
0x0 : NOERROR
no error
0x1 : ONEECCERR
one ECC error detected
0x2 : TWOECCERR
two ECC errors detected
End of enumeration elements list.
LOCK0 : Lock Region 0 Lock Status
bits : 16 - 16 (1 bit)
access : read-only
LOCK1 : Lock Region 1 Lock Status
bits : 17 - 17 (1 bit)
access : read-only
LOCK2 : Lock Region 2 Lock Status
bits : 18 - 18 (1 bit)
access : read-only
LOCK3 : Lock Region 3 Lock Status
bits : 19 - 19 (1 bit)
access : read-only
LOCK4 : Lock Region 4 Lock Status
bits : 20 - 20 (1 bit)
access : read-only
LOCK5 : Lock Region 5 Lock Status
bits : 21 - 21 (1 bit)
access : read-only
LOCK6 : Lock Region 6 Lock Status
bits : 22 - 22 (1 bit)
access : read-only
LOCK7 : Lock Region 7 Lock Status
bits : 23 - 23 (1 bit)
access : read-only
LOCK8 : Lock Region 8 Lock Status
bits : 24 - 24 (1 bit)
access : read-only
LOCK9 : Lock Region 9 Lock Status
bits : 25 - 25 (1 bit)
access : read-only
LOCK10 : Lock Region 10 Lock Status
bits : 26 - 26 (1 bit)
access : read-only
LOCK11 : Lock Region 11 Lock Status
bits : 27 - 27 (1 bit)
access : read-only
LOCK12 : Lock Region 12 Lock Status
bits : 28 - 28 (1 bit)
access : read-only
LOCK13 : Lock Region 13 Lock Status
bits : 29 - 29 (1 bit)
access : read-only
LOCK14 : Lock Region 14 Lock Status
bits : 30 - 30 (1 bit)
access : read-only
LOCK15 : Lock Region 15 Lock Status
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRDY : Flash Ready Status
bits : 0 - 0 (1 bit)
access : read-only
LOCKE : Lock Error Status
bits : 2 - 2 (1 bit)
access : read-only
PROGE : Programming Error Status
bits : 3 - 3 (1 bit)
access : read-only
SECURITY : Security Bit Status
bits : 4 - 4 (1 bit)
access : read-only
QPRR : Quick Page Read Result
bits : 5 - 5 (1 bit)
access : read-only
HSMODE : High Speed Mode
bits : 6 - 6 (1 bit)
access : read-only
ECCERR : ECC Error Status
bits : 8 - 9 (2 bit)
access : read-only
Enumeration: ECCERRSelect
0x0 : NOERROR
no error
0x1 : ONEECCERR
one ECC error detected
0x2 : TWOECCERR
two ECC errors detected
End of enumeration elements list.
LOCK0 : Lock Region 0 Lock Status
bits : 16 - 16 (1 bit)
access : read-only
LOCK1 : Lock Region 1 Lock Status
bits : 17 - 17 (1 bit)
access : read-only
LOCK2 : Lock Region 2 Lock Status
bits : 18 - 18 (1 bit)
access : read-only
LOCK3 : Lock Region 3 Lock Status
bits : 19 - 19 (1 bit)
access : read-only
LOCK4 : Lock Region 4 Lock Status
bits : 20 - 20 (1 bit)
access : read-only
LOCK5 : Lock Region 5 Lock Status
bits : 21 - 21 (1 bit)
access : read-only
LOCK6 : Lock Region 6 Lock Status
bits : 22 - 22 (1 bit)
access : read-only
LOCK7 : Lock Region 7 Lock Status
bits : 23 - 23 (1 bit)
access : read-only
LOCK8 : Lock Region 8 Lock Status
bits : 24 - 24 (1 bit)
access : read-only
LOCK9 : Lock Region 9 Lock Status
bits : 25 - 25 (1 bit)
access : read-only
LOCK10 : Lock Region 10 Lock Status
bits : 26 - 26 (1 bit)
access : read-only
LOCK11 : Lock Region 11 Lock Status
bits : 27 - 27 (1 bit)
access : read-only
LOCK12 : Lock Region 12 Lock Status
bits : 28 - 28 (1 bit)
access : read-only
LOCK13 : Lock Region 13 Lock Status
bits : 29 - 29 (1 bit)
access : read-only
LOCK14 : Lock Region 14 Lock Status
bits : 30 - 30 (1 bit)
access : read-only
LOCK15 : Lock Region 15 Lock Status
bits : 31 - 31 (1 bit)
access : read-only
Flash Controller Parameter Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FSZ : Flash Size
bits : 0 - 3 (4 bit)
access : read-only
PSZ : Page Size
bits : 8 - 10 (3 bit)
access : read-only
Flash Controller Parameter Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FSZ : Flash Size
bits : 0 - 3 (4 bit)
access : read-only
PSZ : Page Size
bits : 8 - 10 (3 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.