Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
Channel Status Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
CHS : Channel Status
bits : 0 - 31 (32 bit)
Enumeration: CHSSelect
0x0 : 0
Channel j Disabled
0x1 : 1
Channel j Enabled
End of enumeration elements list.
Software Event
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
SEV : Software Event
bits : 0 - 31 (32 bit)
Enumeration: SEVSelect
0x0 : 0
No Action
0x1 : 1
CPU forces software event to channel j
End of enumeration elements list.
Event Shaper
address_offset : 0x1054 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x106C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x11A4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x1270 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x12E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel / User Busy
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BUSY : Channel Status
bits : 0 - 31 (32 bit)
Enumeration: BUSYSelect
0x0 : 0
No Action
0x1 : 1
Channel j or User j is Busy
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x1420 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x1490 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x1564 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x16AC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x16B4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x18DC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x1B08 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x1D38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x1F6C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Trigger Interrupt Mask Enable Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TRIE : Trigger Interrupt Enable
bits : 0 - 31 (32 bit)
Enumeration: TRIESelect
0x0 : 0
No Action
0x1 : 1
Enable Trigger j Interrupt
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x200 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x21A4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x23E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Trigger Interrupt Mask Disable Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TRID : Trigger Interrupt Disable
bits : 0 - 31 (32 bit)
Enumeration: TRIDSelect
0x0 : 0
No Action
0x1 : 1
Disable Trigger j Interrupt
End of enumeration elements list.
Event Shaper
address_offset : 0x2620 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Trigger Interrupt Mask Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TRIM : Trigger Interrupt Mask
bits : 0 - 31 (32 bit)
Enumeration: TRIMSelect
0x0 : 0
Trigger j Interrupt Disabled
0x1 : 1
Trigger j Interrupt Enabled
End of enumeration elements list.
Event Shaper
address_offset : 0x2864 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x2AAC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x2CF8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x2F48 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Trigger Status Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TRS : Trigger Interrupt Status
bits : 0 - 31 (32 bit)
Enumeration: TRSSelect
0x0 : 0
Channel j did not send out an Event in the past
0x1 : 1
Channel j did send out an Event in the past
End of enumeration elements list.
Input Glitch Filter Divider Register
address_offset : 0x300 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IGFDR : Input Glitch Filter Divider Register
bits : 0 - 3 (4 bit)
Channel Multiplexer
address_offset : 0x304 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x319C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x33F4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Trigger Status Clear Register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TRSC : Trigger Interrupt Status Clear
bits : 0 - 31 (32 bit)
Enumeration: TRSCSelect
0x0 : 0
No Action
0x1 : 1
Clear TRSR[j]
End of enumeration elements list.
Event Shaper
address_offset : 0x3650 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x38B0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x3B14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x3D7C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Parameter
address_offset : 0x3F8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IGF_COUNT : Number of Input Glitch Filters
bits : 0 - 7 (8 bit)
EVS_COUNT : Number of Event Shapers
bits : 8 - 15 (8 bit)
EVIN : Number of Event Inputs / Generators
bits : 16 - 23 (8 bit)
TRIGOUT : Number of Trigger Outputs / Channels / Users
bits : 24 - 31 (8 bit)
Version
address_offset : 0x3FC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
VERSION : Version Number
bits : 0 - 11 (12 bit)
VARIANT : Variant Number
bits : 16 - 19 (4 bit)
Event Shaper
address_offset : 0x3FE8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Enable Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CHE : Channel Enable
bits : 0 - 31 (32 bit)
Enumeration: CHESelect
0x0 : 0
No Action
0x1 : 1
Enable Channel j
End of enumeration elements list.
Overrun Interrupt Mask Enable Register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
OVIE : Overrun Interrupt Enable
bits : 0 - 31 (32 bit)
Enumeration: OVIESelect
0x0 : 0
No Action
0x1 : 1
Enable Overrun Interrupt for Channel j
End of enumeration elements list.
Event Shaper
address_offset : 0x400 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x40C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0x4258 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Overrun Interrupt Mask Disable Register
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
OVID : Overrun Interrupt Disable
bits : 0 - 31 (32 bit)
Enumeration: OVIDSelect
0x0 : 0
No Action
0x1 : 1
Enable Overrun Interrupt for Channel j
End of enumeration elements list.
Event Shaper
address_offset : 0x44CC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Event Shaper
address_offset : 0x4744 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Overrun Interrupt Mask Register
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
OVIM : Overrun Interrupt Mask
bits : 0 - 31 (32 bit)
Enumeration: OVIMSelect
0x0 : 0
Overrun Interrupt for Channel j Disabled
0x1 : 1
Overrun Interrupt for Channel j Enabled
End of enumeration elements list.
Overrun Status Register
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
OVS : Overrun Interrupt Status
bits : 0 - 31 (32 bit)
Enumeration: OVSSelect
0x0 : 0
No Overrun occured on Channel j
0x1 : 1
Overrun occured on Channel j
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x518 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Overrun Status Clear Register
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
OVSC : Overrun Interrupt Status Clear
bits : 0 - 31 (32 bit)
Enumeration: OVSCSelect
0x0 : 0
No Action
0x1 : 1
Clear Overrun Status Bit j
End of enumeration elements list.
Event Shaper
address_offset : 0x604 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x628 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x73C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Disable Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CHD : Channel Disable
bits : 0 - 31 (32 bit)
Enumeration: CHDSelect
0x0 : 0
No Action
0x1 : 1
Disable Channel j
End of enumeration elements list.
Event Shaper
address_offset : 0x80C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0x854 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0x970 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0xA18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0xA90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0xBB4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0xC28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0xCDC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Channel Multiplexer
address_offset : 0xE08 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Event Shaper
address_offset : 0xE3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Event Shaper Enable
bits : 0 - 0 (1 bit)
Enumeration: ENSelect
0x0 : 0
No Action
0x1 : 1
Event Shaper enable
End of enumeration elements list.
IGFR : Input Glitch Filter Rise
bits : 16 - 16 (1 bit)
Enumeration: IGFRSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a rising edge on event input will raise trigger output
End of enumeration elements list.
IGFF : Input Glitch Filter Fall
bits : 17 - 17 (1 bit)
Enumeration: IGFFSelect
0x0 : 0
No Action
0x1 : 1
Input Glitch Filter : a falling edge on event input will raise trigger output
End of enumeration elements list.
IGFON : Input Glitch Filter Status
bits : 18 - 18 (1 bit)
Channel Multiplexer
address_offset : 0xF38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVMX : Event Multiplexer
bits : 0 - 5 (6 bit)
Enumeration: EVMXSelect
0x0 : 0x00
Event 0
0x1 : 0x01
Event 1
End of enumeration elements list.
SMX : Software Event Multiplexer
bits : 8 - 8 (1 bit)
Enumeration: SMXSelect
0x0 : 0
Hardware events
0x1 : 1
Software event
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.