\n
address_offset : 0x0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x10 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0xC Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x4 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x8 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x14 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
CRC Computing Generator Polynomial Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Computing Input Data Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Computing Output Data Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Computing Initial Value Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Computing Resault XOR Value Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Computing Configuration Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CIRQCLR : Interrupt request clear
bits : 0 - -1 (0 bit)
access : write-only
FO : output data format
bits : 8 - 8 (1 bit)
access : read-write
FI : Input data format
bits : 10 - 10 (1 bit)
access : read-write
TEST : Test
bits : 16 - 20 (5 bit)
access : read-write
SZ : Input data size
bits : 22 - 22 (1 bit)
access : read-write
CIRQ : Interrupt request
bits : 24 - 23 (0 bit)
access : read-only
CIEN : Interrupt request enable
bits : 25 - 24 (0 bit)
access : read-write
CDEN : DMA request enable
bits : 26 - 25 (0 bit)
access : read-write
LOCK : Lock
bits : 28 - 27 (0 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.