\n
address_offset : 0x0 Bytes (0x0)
size : 0x108 byte (0x0)
mem_usage : registers
protection : not protected
TCON control1 register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 0 (1 bit)
access : read-only
RGB_PADDING : no description available
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
all "0"
#1 : 1
all "1"
End of enumeration elements list.
RGB_PADDING_EN : no description available
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
disable padding during blanking
#1 : 1
enable padding during blanking
End of enumeration elements list.
COLOR_DEPTH : no description available
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
6 bits, the 2 LSB's are set to 2'b0
#1 : 1
8 bits
End of enumeration elements list.
VSYNC_INV : no description available
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
vsync_in signal is active high
#1 : 1
vsync_in signal is active low
End of enumeration elements list.
HSYNC_INV : no description available
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
hsync_in signal is active high
#1 : 1
hsync_in signal is active low
End of enumeration elements list.
VLEN : no description available
bits : 6 - 7 (2 bit)
access : read-write
H_REF_SEL : no description available
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#00 : 00
select tcon_comp0 output as h_ref.
#01 : 01
select tcon_comp1 output as h_ref.
#10 : 10
select tcon_comp2 output as h_ref.
#11 : 11
select tcon_comp3 output as h_ref.
End of enumeration elements list.
V_REF_SEL : no description available
bits : 10 - 12 (3 bit)
access : read-write
Enumeration:
#000 : 000
select tcon_pulse0 output as v_ref
#001 : 001
select tcon_pulse1 output as v_ref
#010 : 010
select tcon_pulse2 output as v_ref
#011 : 011
select tcon_pulse3 output as v_ref
#100 : 100
select tcon_pulse4 output as v_ref
#101 : 101
select tcon_pulse5 output as v_ref
#110 : 110
select tcon_pulse0 output as v_ref, while reset vtgl_counter and vtgl[3] to 0 at rising edge of v_ref.
#111 : 111
select tcon_pulse0 output as v_ref, while set vtgl_counter to 1 and reset vtgl[3] to 0 at rising edge of v_ref.
End of enumeration elements list.
INIT_DELAY : no description available
bits : 13 - 15 (3 bit)
access : read-write
TCONx_INV : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
do not invert tconx
#1 : 1
invert output tconx
End of enumeration elements list.
INV_EN : no description available
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable output data inversion
#1 : 1
Enable output data inversion
End of enumeration elements list.
TCON_BYPASS : no description available
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
Not bypass TCON. State of the TCON is decided by TCON_EN.
#1 : 1
Bypass TCON, both data and timing signals will pass through the TCON unmodified. see the "Bypass Mode" section for pin mapping in that mode.
End of enumeration elements list.
RESERVED : no description available
bits : 30 - 30 (1 bit)
access : read-only
TCON_EN : no description available
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable TCON.
#1 : 1
enable TCON.
End of enumeration elements list.
Comparator 2 configure register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_VALUE : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 30 (19 bit)
access : read-only
FUNC_SEL : no description available
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
compare on horizontal direction
#1 : 1
compare on vertical direction
End of enumeration elements list.
TCON control2 register
address_offset : 0x104 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DIV_RATIO : no description available
bits : 0 - 7 (8 bit)
access : read-write
RESERVED : no description available
bits : 8 - 15 (8 bit)
access : read-only
CLK_OFFSET : no description available
bits : 16 - 24 (9 bit)
access : read-write
RESERVED : no description available
bits : 25 - 31 (7 bit)
access : read-only
Comparator 3 configure register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_VALUE : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 30 (19 bit)
access : read-only
FUNC_SEL : no description available
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
compare on horizontal direction
#1 : 1
compare on vertical direction
End of enumeration elements list.
Comparator 0 compare value mask register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore the given bit x in comparator matching
#1 : 1
Include the given bit x in comparator matching
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 31 (20 bit)
access : read-only
Comparator 1 compare value mask register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore the given bit x in comparator matching
#1 : 1
Include the given bit x in comparator matching
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 31 (20 bit)
access : read-only
Comparator 2 compare value mask register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore the given bit x in comparator matching
#1 : 1
Include the given bit x in comparator matching
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 31 (20 bit)
access : read-only
Comparator 3 compare value mask register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore the given bit x in comparator matching
#1 : 1
Include the given bit x in comparator matching
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 31 (20 bit)
access : read-only
Pulse 0 configure register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Pulse 1 configure register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Pulse 2 configure register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Pulse 3 configure register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Pulse 4 configure register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Pulse 5 configure register
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 13 (2 bit)
access : read-only
COMPARATOR_SEL : no description available
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
select comparator0
#01 : 01
select comparator1
#10 : 10
select comparator2
#11 : 11
select comparator3
End of enumeration elements list.
SET : no description available
bits : 16 - 27 (12 bit)
access : read-write
RESERVED : no description available
bits : 28 - 29 (2 bit)
access : read-only
FUNC_SEL : no description available
bits : 30 - 31 (2 bit)
access : read-write
Enumeration:
#00 : 00
SET/RESET value both for horizontal compare
#01 : 01
SET/RESET value both for vertical compare, signal transition point determined by COMPARATOR_SEL
#10 : 10
SET/RESET value both for vertical compare, signal transitions at the beginning of the line which is matched.
#11 : 11
SET value for horizontal compare, RESET value for vertical compare. Signal transition point for RESET determined by COMPARATOR_SEL.
End of enumeration elements list.
Bit map control register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESERVED : no description available
bits : 0 - 0 (1 bit)
access : read-only
BIT_ORDER : no description available
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
MSB 7 down to LSB 0 for every color component
#1 : 1
LSB 0 up to MSB 7, for every color component. (inverted order)
End of enumeration elements list.
COLOR_ORDER : no description available
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
#000 : 000
RGB
#001 : 001
BRG
#010 : 010
GBR
#011 : 011
RBG
#100 : 100
GRB
#101 : 101
BGR
End of enumeration elements list.
CLK_POS : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 31 (22 bit)
access : read-only
Pulse 0 compare value mask register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Pulse 1 compare value mask register
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Pulse 2 compare value mask register
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Pulse 3 compare value mask register
address_offset : 0x4C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Pulse 4 compare value mask register
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Pulse 5 compare value mask register
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET_MSK : no description available
bits : 0 - 11 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator reset value comparison.
#1 : 1
Include x position in pulse generator reset value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 12 - 15 (4 bit)
access : read-only
SET_MSK : no description available
bits : 16 - 27 (12 bit)
access : read-write
Enumeration:
#0 : 0
Ignore x position in pulse generator set value comparison
#1 : 1
Include x postion in pulse generator set value comparison
End of enumeration elements list.
RESERVED : no description available
bits : 28 - 31 (4 bit)
access : read-only
Function control register 0
address_offset : 0x58 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 1
address_offset : 0x5C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control registers 2
address_offset : 0x60 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 3
address_offset : 0x64 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 4
address_offset : 0x68 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 5
address_offset : 0x6C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 6
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 7
address_offset : 0x74 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 8
address_offset : 0x78 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 9
address_offset : 0x7C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Comparator 0 configure register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_VALUE : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 30 (19 bit)
access : read-only
FUNC_SEL : no description available
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
compare on horizontal direction
#1 : 1
compare on vertical direction
End of enumeration elements list.
Function control register 10
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 11
address_offset : 0x84 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 12
address_offset : 0x88 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
Function control register 13
address_offset : 0x8C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
X_SEL : no description available
bits : 0 - 4 (5 bit)
access : read-write
Y_SEL : no description available
bits : 5 - 9 (5 bit)
access : read-write
RESERVED : no description available
bits : 10 - 19 (10 bit)
access : read-only
INDEX0_SEL : no description available
bits : 20 - 22 (3 bit)
access : read-write
INDEX1_SEL : no description available
bits : 23 - 25 (3 bit)
access : read-write
INDEX2_SEL : no description available
bits : 26 - 28 (3 bit)
access : read-write
INDEX3_SEL : no description available
bits : 29 - 31 (3 bit)
access : read-write
Enumeration:
#000 : 000
index3 = 0;
#001 : 001
index3 = X;
#010 : 010
index3 = Y;
#011 : 011
index3 = X&Y;
#100 : 100
index3 = X|Y;
#101 : 101
index3 = X^Y;
#110 : 110
index3 = !(X&Y))
#111 : 111
reserved for use
End of enumeration elements list.
TCON output mux control low
address_offset : 0x90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TCON0 : no description available
bits : 0 - 4 (5 bit)
access : read-write
TCON1 : no description available
bits : 5 - 9 (5 bit)
access : read-write
TCON2 : no description available
bits : 10 - 14 (5 bit)
access : read-write
TCON3 : no description available
bits : 15 - 19 (5 bit)
access : read-write
TCON4 : no description available
bits : 20 - 24 (5 bit)
access : read-write
TCON5 : no description available
bits : 25 - 29 (5 bit)
access : read-write
RESERVED : no description available
bits : 30 - 31 (2 bit)
access : read-only
TCON output mux control high
address_offset : 0x94 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TCON6 : no description available
bits : 0 - 4 (5 bit)
access : read-write
TCON7 : no description available
bits : 5 - 9 (5 bit)
access : read-write
TCON8 : no description available
bits : 10 - 14 (5 bit)
access : read-write
TCON9 : no description available
bits : 15 - 19 (5 bit)
access : read-write
TCON10 : no description available
bits : 20 - 24 (5 bit)
access : read-write
TCON11 : no description available
bits : 25 - 29 (5 bit)
access : read-write
RESERVED : no description available
bits : 30 - 31 (2 bit)
access : read-only
TCON look up table 0
address_offset : 0x98 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 1
address_offset : 0x9C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 2
address_offset : 0xA0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 3
address_offset : 0xA4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 4
address_offset : 0xA8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 5
address_offset : 0xAC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 6
address_offset : 0xB0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 7
address_offset : 0xB4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 8
address_offset : 0xB8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up tables 9
address_offset : 0xBC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
Comparator 1 configure register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_VALUE : no description available
bits : 0 - 11 (12 bit)
access : read-write
RESERVED : no description available
bits : 12 - 30 (19 bit)
access : read-only
FUNC_SEL : no description available
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
#0 : 0
compare on horizontal direction
#1 : 1
compare on vertical direction
End of enumeration elements list.
TCON look up table 10
address_offset : 0xC0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 11
address_offset : 0xC4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 12
address_offset : 0xC8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
TCON look up table 13
address_offset : 0xCC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LUT : no description available
bits : 0 - 31 (32 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.