\n
address_offset : 0x0 Bytes (0x0)
size : 0x100 byte (0x0)
mem_usage : registers
protection : not protected
Input Selector Configuration
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EV0IS : Event 0 signal selection
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : value1
CCU4x.INyA
#0001 : value2
CCU4x.INyB
#0010 : value3
CCU4x.INyC
#0011 : value4
CCU4x.INyD
#0100 : value5
CCU4x.INyE
#0101 : value6
CCU4x.INyF
#0110 : value7
CCU4x.INyG
#0111 : value8
CCU4x.INyH
#1000 : value9
CCU4x.INyI
#1001 : value10
CCU4x.INyJ
#1010 : value11
CCU4x.INyK
#1011 : value12
CCU4x.INyL
#1100 : value13
CCU4x.INyM
#1101 : value14
CCU4x.INyN
#1110 : value15
CCU4x.INyO
#1111 : value16
CCU4x.INyP
End of enumeration elements list.
EV1IS : Event 1 signal selection
bits : 4 - 6 (3 bit)
access : read-write
Enumeration:
#0000 : value1
CCU4x.INyA
#0001 : value2
CCU4x.INyB
#0010 : value3
CCU4x.INyC
#0011 : value4
CCU4x.INyD
#0100 : value5
CCU4x.INyE
#0101 : value6
CCU4x.INyF
#0110 : value7
CCU4x.INyG
#0111 : value8
CCU4x.INyH
#1000 : value9
CCU4x.INyI
#1001 : value10
CCU4x.INyJ
#1010 : value11
CCU4x.INyK
#1011 : value12
CCU4x.INyL
#1100 : value13
CCU4x.INyM
#1101 : value14
CCU4x.INyN
#1110 : value15
CCU4x.INyO
#1111 : value16
CCU4x.INyP
End of enumeration elements list.
EV2IS : Event 2 signal selection
bits : 8 - 10 (3 bit)
access : read-write
Enumeration:
#0000 : value1
CCU4x.INyA
#0001 : value2
CCU4x.INyB
#0010 : value3
CCU4x.INyC
#0011 : value4
CCU4x.INyD
#0100 : value5
CCU4x.INyE
#0101 : value6
CCU4x.INyF
#0110 : value7
CCU4x.INyG
#0111 : value8
CCU4x.INyH
#1000 : value9
CCU4x.INyI
#1001 : value10
CCU4x.INyJ
#1010 : value11
CCU4x.INyK
#1011 : value12
CCU4x.INyL
#1100 : value13
CCU4x.INyM
#1101 : value14
CCU4x.INyN
#1110 : value15
CCU4x.INyO
#1111 : value16
CCU4x.INyP
End of enumeration elements list.
EV0EM : Event 0 Edge Selection
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#00 : value1
No action
#01 : value2
Signal active on rising edge
#10 : value3
Signal active on falling edge
#11 : value4
Signal active on both edges
End of enumeration elements list.
EV1EM : Event 1 Edge Selection
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#00 : value1
No action
#01 : value2
Signal active on rising edge
#10 : value3
Signal active on falling edge
#11 : value4
Signal active on both edges
End of enumeration elements list.
EV2EM : Event 2 Edge Selection
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#00 : value1
No action
#01 : value2
Signal active on rising edge
#10 : value3
Signal active on falling edge
#11 : value4
Signal active on both edges
End of enumeration elements list.
EV0LM : Event 0 Level Selection
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : value1
Active on HIGH level
#1 : value2
Active on LOW level
End of enumeration elements list.
EV1LM : Event 1 Level Selection
bits : 23 - 22 (0 bit)
access : read-write
Enumeration:
#0 : value1
Active on HIGH level
#1 : value2
Active on LOW level
End of enumeration elements list.
EV2LM : Event 2 Level Selection
bits : 24 - 23 (0 bit)
access : read-write
Enumeration:
#0 : value1
Active on HIGH level
#1 : value2
Active on LOW level
End of enumeration elements list.
LPF0M : Event 0 Low Pass Filter Configuration
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#00 : value1
LPF is disabled
#01 : value2
3 clock cycles of fCCU4
#10 : value3
5 clock cycles of fCCU4
#11 : value4
7 clock cycles of fCCU4
End of enumeration elements list.
LPF1M : Event 1 Low Pass Filter Configuration
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#00 : value1
LPF is disabled
#01 : value2
3 clock cycles of fCCU4
#10 : value3
5 clock cycles of fCCU4
#11 : value4
7 clock cycles of fCCU4
End of enumeration elements list.
LPF2M : Event 2 Low Pass Filter Configuration
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#00 : value1
LPF is disabled
#01 : value2
3 clock cycles of fCCU4
#10 : value3
5 clock cycles of fCCU4
#11 : value4
7 clock cycles of fCCU4
End of enumeration elements list.
Slice Timer Clear
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TRBC : Timer Run Bit Clear
bits : 0 - -1 (0 bit)
access : write-only
TCC : Timer Clear
bits : 1 - 0 (0 bit)
access : write-only
DITC : Dither Counter Clear
bits : 2 - 1 (0 bit)
access : write-only
Slice Timer Control
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TCM : Timer Counting Mode
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Edge aligned mode
#1 : value2
Center aligned mode
End of enumeration elements list.
TSSM : Timer Single Shot Mode
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : value1
Single shot mode is disabled
#1 : value2
Single shot mode is enabled
End of enumeration elements list.
CLST : Shadow Transfer on Clear
bits : 2 - 1 (0 bit)
access : read-write
CMOD : Capture Compare Mode
bits : 3 - 2 (0 bit)
access : read-only
Enumeration:
#0 : value1
Compare Mode
#1 : value2
Capture Mode
End of enumeration elements list.
ECM : Extended Capture Mode
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : value1
Normal Capture Mode. Clear of the Full Flag of each capture register is done by accessing the registers individually only.
#1 : value2
Extended Capture Mode. Clear of the Full Flag of each capture register is done not only by accessing the individual registers but also by accessing the ECRD register. When reading the ECRD register, only the capture register register full flag pointed by the ECRD.VPTR is cleared.
End of enumeration elements list.
CAPC : Clear on Capture Control
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#00 : value1
Timer is never cleared on a capture event
#01 : value2
Timer is cleared on a capture event into capture registers 2 and 3. (When SCE = 1#, Timer is always cleared in a capture event)
#10 : value3
Timer is cleared on a capture event into capture registers 0 and 1. (When SCE = 1#, Timer is always cleared in a capture event)
#11 : value4
Timer is always cleared in a capture event.
End of enumeration elements list.
ENDM : Extended Stop Function Control
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : value1
Clears the timer run bit only (default stop)
#01 : value2
Clears the timer only (flush)
#10 : value3
Clears the timer and run bit (flush/stop)
End of enumeration elements list.
STRM : Extended Start Function Control
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : value1
Sets run bit only (default start)
#1 : value2
Clears the timer and sets run bit (flush/start)
End of enumeration elements list.
SCE : Equal Capture Event enable
bits : 11 - 10 (0 bit)
access : read-write
Enumeration:
#0 : value1
Capture into CC4yC0VThis register contains the values associated with the Capture 0 field./CC4yC1VThis register contains the values associated with the Capture 1 field. registers control by CCycapt0 and capture into CC4yC3VThis register contains the values associated with the Capture 3 field./CC4yC2VThis register contains the values associated with the Capture 2 field. control by CCycapt1
#1 : value2
Capture into CC4yC0VThis register contains the values associated with the Capture 0 field./CC4yC1VThis register contains the values associated with the Capture 1 field. and CC4yC3VThis register contains the values associated with the Capture 3 field./CC4yC2VThis register contains the values associated with the Capture 2 field. control by CCycapt1
End of enumeration elements list.
CCS : Continuous Capture Enable
bits : 12 - 11 (0 bit)
access : read-write
Enumeration:
#0 : value1
The capture into a specific capture register is done with the rules linked with the full flags, described at .
#1 : value2
The capture into the capture registers is always done regardless of the full flag status (even if the register has not been read back).
End of enumeration elements list.
DITHE : Dither Enable
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#00 : value1
Dither is disabled
#01 : value2
Dither is applied to the Period
#10 : value3
Dither is applied to the Compare
#11 : value4
Dither is applied to the Period and Compare
End of enumeration elements list.
DIM : Dither input selector
bits : 15 - 14 (0 bit)
access : read-write
Enumeration:
#0 : value1
Slice is using its own dither unit
#1 : value2
Slice is connected to the dither unit of slice 0.
End of enumeration elements list.
FPE : Floating Prescaler enable
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : value1
Floating prescaler mode is disabled
#1 : value2
Floating prescaler mode is enabled
End of enumeration elements list.
TRAPE : TRAP enable
bits : 17 - 16 (0 bit)
access : read-write
Enumeration:
#0 : value1
TRAP functionality has no effect on the output
#1 : value2
TRAP functionality affects the output
End of enumeration elements list.
TRPSE : TRAP Synchronization Enable
bits : 21 - 20 (0 bit)
access : read-write
Enumeration:
#0 : value1
Exiting from TRAP state isn't synchronized with the PWM signal
#1 : value2
Exiting from TRAP state is synchronized with the PWM signal
End of enumeration elements list.
TRPSW : TRAP State Clear Control
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : value1
The slice exits the TRAP state automatically when the TRAP condition is not present
#1 : value2
The TRAP state can only be exited by a SW request.
End of enumeration elements list.
EMS : External Modulation Synchronization
bits : 23 - 22 (0 bit)
access : read-write
Enumeration:
#0 : value1
External Modulation functionality is not synchronized with the PWM signal
#1 : value2
External Modulation functionality is synchronized with the PWM signal
End of enumeration elements list.
EMT : External Modulation Type
bits : 24 - 23 (0 bit)
access : read-write
Enumeration:
#0 : value1
External Modulation functionality is clearing the CC4yST bit.
#1 : value2
External Modulation functionality is gating the outputs.
End of enumeration elements list.
MCME : Multi Channel Mode Enable
bits : 25 - 24 (0 bit)
access : read-write
Enumeration:
#0 : value1
Multi Channel Mode is disabled
#1 : value2
Multi Channel Mode is enabled
End of enumeration elements list.
Passive Level Config
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PSL : Output Passive Level
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Passive Level is LOW
#1 : value2
Passive Level is HIGH
End of enumeration elements list.
Dither Config
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCV : Dither compare Value
bits : 0 - 2 (3 bit)
access : read-only
DCNT : Dither counter actual value
bits : 8 - 10 (3 bit)
access : read-only
Dither Shadow Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCVS : Dither Shadow Compare Value
bits : 0 - 2 (3 bit)
access : read-write
Prescaler Control
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PSIV : Prescaler Initial Value
bits : 0 - 2 (3 bit)
access : read-write
Floating Prescaler Control
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PCMP : Floating Prescaler Compare Value
bits : 0 - 2 (3 bit)
access : read-only
PVAL : Actual Prescaler Value
bits : 8 - 10 (3 bit)
access : read-write
Floating Prescaler Shadow
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PCMP : Floating Prescaler Shadow Compare Value
bits : 0 - 2 (3 bit)
access : read-write
Timer Period Value
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PR : Period Register
bits : 0 - 14 (15 bit)
access : read-only
Timer Shadow Period Value
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRS : Period Register
bits : 0 - 14 (15 bit)
access : read-write
Timer Compare Value
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CR : Compare Register
bits : 0 - 14 (15 bit)
access : read-only
Timer Shadow Compare Value
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRS : Compare Register
bits : 0 - 14 (15 bit)
access : read-write
Connection Matrix Control
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
STRTS : External Start Functionality Selector
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Start Function deactivated
#01 : value2
External Start Function triggered by Event 0
#10 : value3
External Start Function triggered by Event 1
#11 : value4
External Start Function triggered by Event 2
End of enumeration elements list.
ENDS : External Stop Functionality Selector
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Stop Function deactivated
#01 : value2
External Stop Function triggered by Event 0
#10 : value3
External Stop Function triggered by Event 1
#11 : value4
External Stop Function triggered by Event 2
End of enumeration elements list.
CAP0S : External Capture 0 Functionality Selector
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Capture 0 Function deactivated
#01 : value2
External Capture 0 Function triggered by Event 0
#10 : value3
External Capture 0 Function triggered by Event 1
#11 : value4
External Capture 0 Function triggered by Event 2
End of enumeration elements list.
CAP1S : External Capture 1 Functionality Selector
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Capture 1 Function deactivated
#01 : value2
External Capture 1 Function triggered by Event 0
#10 : value3
External Capture 1 Function triggered by Event 1
#11 : value4
External Capture 1 Function triggered by Event 2
End of enumeration elements list.
GATES : External Gate Functionality Selector
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Gating Function deactivated
#01 : value2
External Gating Function triggered by Event 0
#10 : value3
External Gating Function triggered by Event 1
#11 : value4
External Gating Function triggered by Event 2
End of enumeration elements list.
UDS : External Up/Down Functionality Selector
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Up/Down Function deactivated
#01 : value2
External Up/Down Function triggered by Event 0
#10 : value3
External Up/Down Function triggered by Event 1
#11 : value4
External Up/Down Function triggered by Event 2
End of enumeration elements list.
LDS : External Timer Load Functionality Selector
bits : 12 - 12 (1 bit)
access : read-write
CNTS : External Count Selector
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#00 : value1
External Count Function deactivated
#01 : value2
External Count Function triggered by Event 0
#10 : value3
External Count Function triggered by Event 1
#11 : value4
External Count Function triggered by Event 2
End of enumeration elements list.
OFS : Override Function Selector
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : value1
Override functionality disabled
#1 : value2
Status bit trigger override connected to Event 1; Status bit value override connected to Event 2
End of enumeration elements list.
TS : Trap Function Selector
bits : 17 - 16 (0 bit)
access : read-write
Enumeration:
#0 : value1
Trap function disabled
#1 : value2
TRAP function connected to Event 2
End of enumeration elements list.
MOS : External Modulation Functionality Selector
bits : 18 - 18 (1 bit)
access : read-write
TCE : Timer Concatenation Enable
bits : 20 - 19 (0 bit)
access : read-write
Enumeration:
#0 : value1
Timer concatenation is disabled
#1 : value2
Timer concatenation is enabled
End of enumeration elements list.
Timer Value
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TVAL : Timer Value
bits : 0 - 14 (15 bit)
access : read-write
Capture Register 0
address_offset : 0x74 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPTV : Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Value
bits : 16 - 18 (3 bit)
access : read-only
FFL : Full Flag
bits : 20 - 19 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into the specific capture register
#1 : value2
A new value was captured into the specific register
End of enumeration elements list.
Capture Register 1
address_offset : 0x78 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPTV : Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Value
bits : 16 - 18 (3 bit)
access : read-only
FFL : Full Flag
bits : 20 - 19 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into the specific capture register
#1 : value2
A new value was captured into the specific register
End of enumeration elements list.
Capture Register 2
address_offset : 0x7C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPTV : Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Value
bits : 16 - 18 (3 bit)
access : read-only
FFL : Full Flag
bits : 20 - 19 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into the specific capture register
#1 : value2
A new value was captured into the specific register
End of enumeration elements list.
Slice Timer Status
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TRB : Timer Run Bit
bits : 0 - -1 (0 bit)
access : read-only
Enumeration:
#0 : value1
Timer is stopped
#1 : value2
Timer is running
End of enumeration elements list.
CDIR : Timer Counting Direction
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : value1
Timer is counting up
#1 : value2
Timer is counting down
End of enumeration elements list.
Capture Register 3
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPTV : Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Value
bits : 16 - 18 (3 bit)
access : read-only
FFL : Full Flag
bits : 20 - 19 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into the specific capture register
#1 : value2
A new value was captured into the specific register
End of enumeration elements list.
Interrupt Status
address_offset : 0xA0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PMUS : Period Match while Counting Up
bits : 0 - -1 (0 bit)
access : read-only
Enumeration:
#0 : value1
Period match while counting up not detected
#1 : value2
Period match while counting up detected
End of enumeration elements list.
OMDS : One Match while Counting Down
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : value1
One match while counting down not detected
#1 : value2
One match while counting down detected
End of enumeration elements list.
CMUS : Compare Match while Counting Up
bits : 2 - 1 (0 bit)
access : read-only
Enumeration:
#0 : value1
Compare match while counting up not detected
#1 : value2
Compare match while counting up detected
End of enumeration elements list.
CMDS : Compare Match while Counting Down
bits : 3 - 2 (0 bit)
access : read-only
Enumeration:
#0 : value1
Compare match while counting down not detected
#1 : value2
Compare match while counting down detected
End of enumeration elements list.
E0AS : Event 0 Detection Status
bits : 8 - 7 (0 bit)
access : read-only
Enumeration:
#0 : value1
Event 0 not detected
#1 : value2
Event 0 detected
End of enumeration elements list.
E1AS : Event 1 Detection Status
bits : 9 - 8 (0 bit)
access : read-only
Enumeration:
#0 : value1
Event 1 not detected
#1 : value2
Event 1 detected
End of enumeration elements list.
E2AS : Event 2 Detection Status
bits : 10 - 9 (0 bit)
access : read-only
Enumeration:
#0 : value1
Event 2 not detected
#1 : value2
Event 2 detected
End of enumeration elements list.
TRPF : Trap Flag Status
bits : 11 - 10 (0 bit)
access : read-only
Interrupt Enable Control
address_offset : 0xA4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PME : Period match while counting up enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Period Match interrupt is disabled
#1 : value2
Period Match interrupt is enabled
End of enumeration elements list.
OME : One match while counting down enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : value1
One Match interrupt is disabled
#1 : value2
One Match interrupt is enabled
End of enumeration elements list.
CMUE : Compare match while counting up enable
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Compare Match while counting up interrupt is disabled
#1 : value2
Compare Match while counting up interrupt is enabled
End of enumeration elements list.
CMDE : Compare match while counting down enable
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : value1
Compare Match while counting down interrupt is disabled
#1 : value2
Compare Match while counting down interrupt is enabled
End of enumeration elements list.
E0AE : Event 0 interrupt enable
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : value1
Event 0 detection interrupt is disabled
#1 : value2
Event 0 detection interrupt is enabled
End of enumeration elements list.
E1AE : Event 1 interrupt enable
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : value1
Event 1 detection interrupt is disabled
#1 : value2
Event 1 detection interrupt is enabled
End of enumeration elements list.
E2AE : Event 2 interrupt enable
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : value1
Event 2 detection interrupt is disabled
#1 : value2
Event 2 detection interrupt is enabled
End of enumeration elements list.
Service Request Selector
address_offset : 0xA8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
POSR : Period/One match Service request selector
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : value1
Forward to CC4ySR0
#01 : value2
Forward to CC4ySR1
#10 : value3
Forward to CC4ySR2
#11 : value4
Forward to CC4ySR3
End of enumeration elements list.
CMSR : Compare match Service request selector
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#00 : value1
Forward to CC4ySR0
#01 : value2
Forward to CC4ySR1
#10 : value3
Forward to CC4ySR2
#11 : value4
Forward to CC4ySR3
End of enumeration elements list.
E0SR : Event 0 Service request selector
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : value1
Forward to CC4ySR0
#01 : value2
Forward to CC4ySR1
#10 : value3
Forward to CC4ySR2
#11 : value4
Forward to CC4ySR3
End of enumeration elements list.
E1SR : Event 1 Service request selector
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#00 : value1
Forward to CC4ySR0
#01 : value2
Forward to CC4ySR1
#10 : value3
Forward to CC4ySR2
#11 : value4
Forward to CC4ySR3
End of enumeration elements list.
E2SR : Event 2 Service request selector
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#00 : value1
Forward to CC4ySR0
#01 : value2
Forward to CC4ySR1
#10 : value3
Forward to CC4ySR2
#11 : value4
Forward to CC4ySR3
End of enumeration elements list.
Interrupt Status Set
address_offset : 0xAC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SPM : Period match while counting up set
bits : 0 - -1 (0 bit)
access : write-only
SOM : One match while counting down set
bits : 1 - 0 (0 bit)
access : write-only
SCMU : Compare match while counting up set
bits : 2 - 1 (0 bit)
access : write-only
SCMD : Compare match while counting down set
bits : 3 - 2 (0 bit)
access : write-only
SE0A : Event 0 detection set
bits : 8 - 7 (0 bit)
access : write-only
SE1A : Event 1 detection set
bits : 9 - 8 (0 bit)
access : write-only
SE2A : Event 2 detection set
bits : 10 - 9 (0 bit)
access : write-only
STRPF : Trap Flag status set
bits : 11 - 10 (0 bit)
access : write-only
Interrupt Status Clear
address_offset : 0xB0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RPM : Period match while counting up clear
bits : 0 - -1 (0 bit)
access : write-only
ROM : One match while counting down clear
bits : 1 - 0 (0 bit)
access : write-only
RCMU : Compare match while counting up clear
bits : 2 - 1 (0 bit)
access : write-only
RCMD : Compare match while counting down clear
bits : 3 - 2 (0 bit)
access : write-only
RE0A : Event 0 detection clear
bits : 8 - 7 (0 bit)
access : write-only
RE1A : Event 1 detection clear
bits : 9 - 8 (0 bit)
access : write-only
RE2A : Event 2 detection clear
bits : 10 - 9 (0 bit)
access : write-only
RTRPF : Trap Flag status clear
bits : 11 - 10 (0 bit)
access : write-only
Extended Read Back 0
address_offset : 0xB8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPV : Timer Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Capture value
bits : 16 - 18 (3 bit)
access : read-only
SPTR : Slice pointer
bits : 20 - 20 (1 bit)
access : read-only
Enumeration:
#00 : value1
CC40
#01 : value2
CC41
#10 : value3
CC42
#11 : value4
CC43
End of enumeration elements list.
VPTR : Capture register pointer
bits : 22 - 22 (1 bit)
access : read-only
Enumeration:
#00 : value1
Capture register 0
#01 : value2
Capture register 1
#10 : value3
Capture register 2
#11 : value4
Capture register 3
End of enumeration elements list.
FFL : Full Flag
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into this register
#1 : value2
A new value has been captured into this register
End of enumeration elements list.
LCV : Lost Capture Value
bits : 25 - 24 (0 bit)
access : read-only
Enumeration:
#0 : value1
No capture was lost
#1 : value2
A capture was lost
End of enumeration elements list.
Extended Read Back 1
address_offset : 0xBC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAPV : Timer Capture Value
bits : 0 - 14 (15 bit)
access : read-only
FPCV : Prescaler Capture value
bits : 16 - 18 (3 bit)
access : read-only
SPTR : Slice pointer
bits : 20 - 20 (1 bit)
access : read-only
Enumeration:
#00 : value1
CC40
#01 : value2
CC41
#10 : value3
CC42
#11 : value4
CC43
End of enumeration elements list.
VPTR : Capture register pointer
bits : 22 - 22 (1 bit)
access : read-only
Enumeration:
#00 : value1
Capture register 0
#01 : value2
Capture register 1
#10 : value3
Capture register 2
#11 : value4
Capture register 3
End of enumeration elements list.
FFL : Full Flag
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
No new value was captured into this register
#1 : value2
A new value has been captured into this register
End of enumeration elements list.
LCV : Lost Capture Value
bits : 25 - 24 (0 bit)
access : read-only
Enumeration:
#0 : value1
No capture was lost
#1 : value2
A capture was lost
End of enumeration elements list.
Slice Timer Run Set
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TRBS : Timer Run Bit set
bits : 0 - -1 (0 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.