\n
address_offset : 0x0 Bytes (0x0)
size : 0x100 byte (0x0)
mem_usage : registers
protection : not protected
Overrun Status
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LN0 : Line 0 Overrun Status
bits : 0 - -1 (0 bit)
access : read-only
LN1 : Line 1 Overrun Status
bits : 1 - 0 (0 bit)
access : read-only
LN2 : Line 2 Overrun Status
bits : 2 - 1 (0 bit)
access : read-only
LN3 : Line 3 Overrun Status
bits : 3 - 2 (0 bit)
access : read-only
LN4 : Line 4 Overrun Status
bits : 4 - 3 (0 bit)
access : read-only
LN5 : Line 5 Overrun Status
bits : 5 - 4 (0 bit)
access : read-only
LN6 : Line 6 Overrun Status
bits : 6 - 5 (0 bit)
access : read-only
LN7 : Line 7 Overrun Status
bits : 7 - 6 (0 bit)
access : read-only
LN8 : Line 8 Overrun Status
bits : 8 - 7 (0 bit)
access : read-only
LN9 : Line 9 Overrun Status
bits : 9 - 8 (0 bit)
access : read-only
LN10 : Line 10 Overrun Status
bits : 10 - 9 (0 bit)
access : read-only
LN11 : Line 11 Overrun Status
bits : 11 - 10 (0 bit)
access : read-only
Line Enable
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LN0 : Line 0 Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN1 : Line 1 Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN2 : Line 2 Enable
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN3 : Line 3 Enable
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN4 : Line 4 Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN5 : Line 5 Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN6 : Line 6 Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN7 : Line 7 Enable
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN8 : Line 8 Enable
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN9 : Line 9 Enable
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN10 : Line 10 Enable
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
LN11 : Line 11 Enable
bits : 11 - 10 (0 bit)
access : read-write
Enumeration:
#0 : value1
Disables the line
#1 : value2
Enables the line and resets a pending request
End of enumeration elements list.
Overrun Clear
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LN0 : Line 0 Overrun Status Clear
bits : 0 - -1 (0 bit)
access : write-only
LN1 : Line 1 Overrun Status Clear
bits : 1 - 0 (0 bit)
access : write-only
LN2 : Line 2 Overrun Status Clear
bits : 2 - 1 (0 bit)
access : write-only
LN3 : Line 3 Overrun Status Clear
bits : 3 - 2 (0 bit)
access : write-only
LN4 : Line 4 Overrun Status Clear
bits : 4 - 3 (0 bit)
access : write-only
LN5 : Line 5 Overrun Status Clear
bits : 5 - 4 (0 bit)
access : write-only
LN6 : Line 6 Overrun Status Clear
bits : 6 - 5 (0 bit)
access : write-only
LN7 : Line 7 Overrun Status Clear
bits : 7 - 6 (0 bit)
access : write-only
LN8 : Line 8 Overrun Status Clear
bits : 8 - 7 (0 bit)
access : write-only
LN9 : Line 9 Overrun Status Clear
bits : 9 - 8 (0 bit)
access : write-only
LN10 : Line 10 Overrun Status Clear
bits : 10 - 9 (0 bit)
access : write-only
LN11 : Line 11 Overrun Status Clear
bits : 11 - 10 (0 bit)
access : write-only
Service Request Selection 0
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RS0 : Request Source for Line 0
bits : 0 - 2 (3 bit)
access : read-write
RS1 : Request Source for Line 1
bits : 4 - 6 (3 bit)
access : read-write
RS2 : Request Source for Line 2
bits : 8 - 10 (3 bit)
access : read-write
RS3 : Request Source for Line 3
bits : 12 - 14 (3 bit)
access : read-write
RS4 : Request Source for Line 4
bits : 16 - 18 (3 bit)
access : read-write
RS5 : Request Source for Line 5
bits : 20 - 22 (3 bit)
access : read-write
RS6 : Request Source for Line 6
bits : 24 - 26 (3 bit)
access : read-write
RS7 : Request Source for Line 7
bits : 28 - 30 (3 bit)
access : read-write
Service Request Selection 1
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RS8 : Request Source for Line 8
bits : 0 - 2 (3 bit)
access : read-write
RS9 : Request Source for Line 9
bits : 4 - 6 (3 bit)
access : read-write
RS10 : Request Source for Line 10
bits : 8 - 10 (3 bit)
access : read-write
RS11 : Request Source for Line 11
bits : 12 - 14 (3 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.