\n

Timers

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

CTRL

COUNT16_0

TERM_CNT16_0

COUNT16_1

TERM_CNT16_1

INTFL

INTEN

COUNT32

TERM_CNT32

PWM_CAP32


CTRL

Timer Control Register
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CTRL CTRL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 mode tmr2x16 prescale polarity enable0 enable1

mode : Operating Modes for 32-bit/16-bit Timers
bits : 0 - 2 (3 bit)
access : read-write

Enumeration:

End of enumeration elements list.

tmr2x16 : Dual 16-bit Timer Mode
bits : 3 - 6 (4 bit)
access : read-write

Enumeration:

End of enumeration elements list.

prescale : Timer Clock Prescale Setting
bits : 4 - 11 (8 bit)
access : read-write

Enumeration:

End of enumeration elements list.

polarity : Timer I/O Polarity
bits : 8 - 16 (9 bit)
access : read-write

Enumeration:

End of enumeration elements list.

enable0 : Enable 32-bit timer / 16-bit timer 0
bits : 12 - 24 (13 bit)
access : read-write

Enumeration:

End of enumeration elements list.

enable1 : Enable 16-bit timer 1
bits : 13 - 26 (14 bit)
access : read-write

Enumeration:

End of enumeration elements list.


COUNT16_0

[16 bit] Current Count Value, 16-bit Timer 0
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COUNT16_0 COUNT16_0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 value

value : Count Value
bits : 0 - 15 (16 bit)
access : read-write

Enumeration:

End of enumeration elements list.


TERM_CNT16_0

[16 bit] Terminal Count Setting, 16-bit Timer 0
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TERM_CNT16_0 TERM_CNT16_0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 term_count

term_count : Terminal Count Setting
bits : 0 - 15 (16 bit)
access : read-write

Enumeration:

End of enumeration elements list.


COUNT16_1

[16 bit] Current Count Value, 16-bit Timer 1
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COUNT16_1 COUNT16_1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 value

value : Count Value
bits : 0 - 15 (16 bit)
access : read-write

Enumeration:

End of enumeration elements list.


TERM_CNT16_1

[16 bit] Terminal Count Setting, 16-bit Timer 1
address_offset : 0x1C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TERM_CNT16_1 TERM_CNT16_1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 term_count

term_count : Terminal Count Setting
bits : 0 - 15 (16 bit)
access : read-write

Enumeration:

End of enumeration elements list.


INTFL

Timer Module Interrupt Flags
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTFL INTFL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 timer0 timer1

timer0 : Interrupt Flag for 32-bit Timer / 16-bit Timer 0
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

End of enumeration elements list.

timer1 : Interrupt Flag for 16-bit Timer 1
bits : 1 - 2 (2 bit)
access : read-write

Enumeration:

End of enumeration elements list.


INTEN

Timer Module Interrupt Enable/Disable Settings
address_offset : 0x24 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTEN INTEN read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 timer0 timer1

timer0 : Interrupt Enable for 32-bit Timer / 16-bit Timer 0
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

End of enumeration elements list.

timer1 : Interrupt Enable for 16-bit Timer 1
bits : 1 - 2 (2 bit)
access : read-write

Enumeration:

End of enumeration elements list.


COUNT32

[32 bit] Current Count Value
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COUNT32 COUNT32 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

TERM_CNT32

[32 bit] Terminal Count Setting
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TERM_CNT32 TERM_CNT32 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

PWM_CAP32

[32 bit] PWM Compare Setting or Capture/Measure Value
address_offset : 0xC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

PWM_CAP32 PWM_CAP32 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0


Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.