\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected
Comparator 1 control and status register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP1_EN : Comparator 1 enable bit
bits : 0 - 0 (1 bit)
access : read-write
COMP1_PWRMODE : Power Mode of the comparator 1
bits : 2 - 3 (2 bit)
access : read-write
COMP1_INMSEL : Comparator 1 Input Minus connection configuration bit
bits : 4 - 6 (3 bit)
access : read-write
COMP1_INPSEL : Comparator1 input plus selection bit
bits : 7 - 7 (1 bit)
access : read-write
COMP1_POLARITY : Comparator 1 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write
COMP1_HYST : Comparator 1 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write
COMP1_BLANKING : Comparator 1 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write
COMP1_BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write
COMP1_SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write
COMP1_VALUE : Comparator 1 output status bit
bits : 30 - 30 (1 bit)
access : read-only
COMP1_LOCK : COMP1_CSR register lock bit
bits : 31 - 31 (1 bit)
access : write-only
Comparator 2 control and status register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP2_EN : Comparator 2 enable bit
bits : 0 - 0 (1 bit)
access : read-write
COMP2_PWRMODE : Power Mode of the comparator 2
bits : 2 - 3 (2 bit)
access : read-write
COMP2_INMSEL : Comparator 2 Input Minus connection configuration bit
bits : 4 - 6 (3 bit)
access : read-write
COMP2_INPSEL : Comparator 2 Input Plus connection configuration bit
bits : 7 - 7 (1 bit)
access : read-write
COMP2_WINMODE : Windows mode selection bit
bits : 9 - 9 (1 bit)
access : read-write
COMP2_POLARITY : Comparator 2 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write
COMP2_HYST : Comparator 2 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write
COMP2_BLANKING : Comparator 2 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write
COMP2_BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write
COMP2_SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write
COMP2_VALUE : Comparator 2 output status bit
bits : 30 - 30 (1 bit)
access : read-only
COMP2_LOCK : COMP2_CSR register lock bit
bits : 31 - 31 (1 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.