\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected
Trigger select register for DMA channel
address_offset : 0x10C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x11E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x1304 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x142C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x1558 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Selection for frequency measurement reference clock
address_offset : 0x160 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKIN : Clock source number (decimal value) for frequency measure function target clock: 0 = CLK_IN 1 = FRO 12 MHz oscillator 2 = Watchdog oscillator 3 = 32 kHz RTC oscillator 4 = Main clock (see Section 4.5.23) 5 = PIO0_4 6 = PIO0_20 7 = PIO0_24 8 = PIO1_4
bits : 0 - 4 (5 bit)
access : read-write
Selection for frequency measurement target clock
address_offset : 0x164 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKIN : Clock source number (decimal value) for frequency measure function target clock: 0 = CLK_IN 1 = FRO 12 MHz oscillator 2 = Watchdog oscillator 3 = 32 kHz RTC oscillator 4 = Main clock (see Section 4.5.23) 5 = PIO0_4 6 = PIO0_20 7 = PIO0_24 8 = PIO1_4
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x1688 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x17BC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x180 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x1C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x244 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
DMA output trigger selection to become DMA trigger
address_offset : 0x280 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : DMA trigger output number (decimal value) for DMA channel n (n = 0 to 19).
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x2A4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x30C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x38C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
DMA output trigger selection to become DMA trigger
address_offset : 0x3C4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : DMA trigger output number (decimal value) for DMA channel n (n = 0 to 19).
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x3D8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x478 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x4A8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
DMA output trigger selection to become DMA trigger
address_offset : 0x50C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : DMA trigger output number (decimal value) for DMA channel n (n = 0 to 19).
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x568 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x57C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
Pin interrupt select register
address_offset : 0x654 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
DMA output trigger selection to become DMA trigger
address_offset : 0x658 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : DMA trigger output number (decimal value) for DMA channel n (n = 0 to 19).
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x65C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Pin interrupt select register
address_offset : 0x730 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTPIN : Pin number select for pin interrupt or pattern match engine input. (PIO0_0 to PIO1_31 correspond to numbers 0 to 63).
bits : 0 - 7 (8 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x754 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x850 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0x950 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xA54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xB5C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xC68 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xD78 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xE8C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Trigger select register for DMA channel
address_offset : 0xFA4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INP : Trigger input number (decimal value) for DMA channel n (n = 0 to 21). 0 = ADC0 Sequence A interrupt 1 = ADC0 Sequence B interrupt 2 = SCT0 DMA request 0 3 = SCT0 DMA request 1 4 = Timer CTIMER0 Match 0 5 = Timer CTIMER0 Match 1 6 = Timer CTIMER1 Match 0 7 = Timer CTIMER2 Match 0 8 = Timer CTIMER2 Match 1 9 = Timer CTIMER3 Match 0 10 = Timer CTIMER4 Match 0 11 = Timer CTIMER4 Match 1 12 = Pin interrupt 0 13 = Pin interrupt 1 14 = Pin interrupt 2 15 = Pin interrupt 3 16 = DMA output trigger mux 0 17 = DMA output trigger mux 1 18 = DMA output trigger mux 2 19 = DMA output trigger mux 3
bits : 0 - 4 (5 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.