\n

SWM

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1C4 byte (0x0)
mem_usage : registers
protection : not protected

Registers

PINASSIGN0

PINASSIGN_DATA0

PINASSIGN4

PINASSIGN_DATA4

PINASSIGN5

PINASSIGN_DATA5

PINASSIGN6

PINASSIGN_DATA6

PINASSIGN7

PINASSIGN_DATA7

PINENABLE0

PINASSIGN8

PINASSIGN_DATA8

PINASSIGN1

PINASSIGN_DATA1

PINASSIGN2

PINASSIGN_DATA2

PINASSIGN3

PINASSIGN_DATA3


PINASSIGN0

Pin assign register 0. Assign movable functions U0_TXD, U0_RXD, U0_RTS, U0_CTS.
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN0 PINASSIGN0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 U0_TXD_O U0_RXD_I U0_RTS_O U0_CTS_I

U0_TXD_O : U0_TXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

U0_RXD_I : U0_RXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

U0_RTS_O : U0_RTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

U0_CTS_I : U0_CTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA0

Pin assign register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA0 PINASSIGN_DATA0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN4

Pin assign register 4. Assign movable functions SPI0_MOSI, SPI0_MISO,SPI0_SSEL, SPI1_SCK.
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN4 PINASSIGN4 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SPI0_MOSI_IO SPI0_MISO_IO SPI0_SSEL_IO SPI1_SCK_IO

SPI0_MOSI_IO : SPI0_MOSI function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

SPI0_MISO_IO : SPI0_MISIO function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

SPI0_SSEL_IO : SPI0_SSEL function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

SPI1_SCK_IO : SPI1_SCK function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA4

Pin assign register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA4 PINASSIGN_DATA4 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN5

Pin assign register 5. Assign movable functions SPI1_MOSI, SPI1_MISO,SPI1_SSEL, CTIN_0
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN5 PINASSIGN5 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SPI1_MOSI_IO SPI1_MISO_IO SPI1_SSEL_IO CTIN_0_I

SPI1_MOSI_IO : SPI1_MOSI function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

SPI1_MISO_IO : SPI1_MISIO function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

SPI1_SSEL_IO : SPI1_SSEL function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

CTIN_0_I : CTIN_0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA5

Pin assign register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA5 PINASSIGN_DATA5 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN6

Pin assign register 6. Assign movable functions CTIN_1, CTIN_2, CTIN_3,CTOUT_0.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN6 PINASSIGN6 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CTIN_1_I CTIN_2_I CTIN_3_I CTOUT_0_O

CTIN_1_I : CTIN_1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

CTIN_2_I : CTIN_2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

CTIN_3_I : CTIN_3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

CTOUT_0_O : CTOUT_0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA6

Pin assign register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA6 PINASSIGN_DATA6 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN7

Pin assign register 7. Assign movable functions CTOUT_1, CTOUT_2, CTOUT_3,I2C_SDA.
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN7 PINASSIGN7 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CTOUT_1_O CTOUT_2_O CTOUT_3_O I2C_SDA_IO

CTOUT_1_O : CTOUT_1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

CTOUT_2_O : CTOUT_2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

CTOUT_3_O : CTOUT_3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

I2C_SDA_IO : I2C_SDA function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA7

Pin assign register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA7 PINASSIGN_DATA7 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINENABLE0

Pin enable register 0. Enables fixed-pin functions ACMP_I0, ACMP_I1, SWCLK, SWDIO, XTALIN, XTALOUT, RESET, CLKIN, VDDCMP and so on.
address_offset : 0x1C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

PINENABLE0 PINENABLE0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ACMP_I1 ACMP_I2 SWCLK SWDIO XTALIN XTALOUT RESETN RESET CLKIN VDDCMP

ACMP_I1 : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed--pin function is deselected and GPIO is assigned to this pin.
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable ACMP_I1. This function is enabled on pin PIO0_0.

0x1 : DISABLED

Disable ACMP_I1. GPIO function PIO0_0 (default) or any other movable function can be assigned to pin PIO0_0.

End of enumeration elements list.

ACMP_I2 : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use ACMP_I2, disable the CLKIN function in bit 7 of this register and enable ACMP_I2.
bits : 1 - 1 (1 bit)
access : read-write

Enumeration:

0 : ACMP_I2_0

Enable ACMP_I2. This function is enabled on pin PIO0_1.

0x1 : ACMP_I2_1

Disable ACMP_I2. GPIO function PIO0_1 (default) or any other movable function can be assigned to pin PIO0_1.

End of enumeration elements list.

SWCLK : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.
bits : 2 - 2 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable SWCLK. This function is enabled on pin PIO0_3.

0x1 : DISABLED

Disable SWCLK. GPIO function PIO0_3 is selected on this pin. Any other movable function can be assigned to pin PIO0_3.

End of enumeration elements list.

SWDIO : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.
bits : 3 - 3 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable SWDIO. This function is enabled on pin PIO0_2.

0x1 : DISABLED

Disable SWDIO. GPIO function PIO0_2 is selected on this pin. Any other movable function can be assigned to pin PIO0_2.

End of enumeration elements list.

XTALIN : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed--pin function is deselected and GPIO is assigned to this pin.
bits : 4 - 4 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable XTALIN. This function is enabled on pin PIO0_8.

0x1 : DISABLED

Disable XTALIN. GPIO function PIO0_8 (default) or any other movable function can be assigned to pin PIO0_8.

End of enumeration elements list.

XTALOUT : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed--pin function is deselected and GPIO is assigned to this pin.
bits : 5 - 5 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable XTALOUT. This function is enabled on pin PIO0_9.

0x1 : DISABLED

Disable XTALOUT. GPIO function PIO0_9 (default) or any other movable function can be assigned to pin PIO0_9.

End of enumeration elements list.

RESETN : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.
bits : 6 - 6 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable RESETN. This function is enabled on pin PIO0_5.

0x1 : DISABLED

Disable RESETN. GPIO function PIO0_5 is selected on this pin. Any other movable function can be assigned to pin PIO0_5.

End of enumeration elements list.

RESET : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.
bits : 6 - 6 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable RESET. This function is enabled on pin PIO0_5.

0x1 : DISABLED

Disable RESET. GPIO function PIO0_5 is selected on this pin. Any other movable function can be assigned to pin PIO0_5.

End of enumeration elements list.

CLKIN : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use CLKIN, disable ACMP_I2 in bit 1 of this register and enable CLKIN.
bits : 7 - 7 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable CLKIN. This function is enabled on pin PIO0_1.

0x1 : DISABLED

Disable CLKIN. GPIO function PIO0_1 (default) or any other movable function can be assigned to pin CLKIN.

End of enumeration elements list.

VDDCMP : Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed--pin function is deselected and GPIO is assigned to this pin.
bits : 8 - 8 (1 bit)
access : read-write

Enumeration:

0 : ENABLED

Enable VDDCMP. This function is enabled on pin PIO0_6.

0x1 : DISABLED

Disable VDDCMP. GPIO function PIO0_6 (default) or any other movable function can be assigned to pin PIO0_6.

End of enumeration elements list.


PINASSIGN8

Pin assign register 8. Assign movable functions I2C_SCL, ACMP_O, CLKOUT,GPIO_INT_BMAT.
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN8 PINASSIGN8 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 I2C_SCL_IO ACMP_O_O CLKOUT_O GPIO_INT_BMAT_O

I2C_SCL_IO : I2C_SCL function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

ACMP_O_O : ACMP_O_O function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

CLKOUT_O : CLKOUT function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

GPIO_INT_BMAT_O : GPIO_INT_BMAT function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA8

Pin assign register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA8 PINASSIGN_DATA8 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN1

Pin assign register 1. Assign movable functions U0_SCLK, U1_TXD, U1_RXD, U1_RTS.
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN1 PINASSIGN1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 U0_SCLK_IO U1_TXD_O U1_RXD_I U1_RTS_O

U0_SCLK_IO : U0_SCLK function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

U1_TXD_O : U1_TXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

U1_RXD_I : U1_RXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

U1_RTS_O : U1_RTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA1

Pin assign register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA1 PINASSIGN_DATA1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN2

Pin assign register 2. Assign movable functions U1_CTS, U1_SCLK, U2_TXD, U2_RXD.
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN2 PINASSIGN2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 U1_CTS_I U1_SCLK_IO U2_TXD_O U2_RXD_I

U1_CTS_I : U1_CTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

U1_SCLK_IO : U1_SCLK function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

U2_TXD_O : U2_TXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

U2_RXD_I : U2_RXD function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA2

Pin assign register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA2 PINASSIGN_DATA2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN3

Pin assign register 3. Assign movable function U2_RTS, U2_CTS, U2_SCLK, SPI0_SCK.
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN3 PINASSIGN3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 U2_RTS_O U2_CTS_I U2_SCLK_IO SPI0_SCK_IO

U2_RTS_O : U2_RTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 0 - 7 (8 bit)
access : read-write

U2_CTS_I : U2_CTS function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 8 - 15 (8 bit)
access : read-write

U2_SCLK_IO : U2_SCLK function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 16 - 23 (8 bit)
access : read-write

SPI0_SCK_IO : SPI0_SCK function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0(= 0) to PIO0_17 (= 0x11).
bits : 24 - 31 (8 bit)
access : read-write


PINASSIGN_DATA3

Pin assign register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : PINASSIGN_PINASSIGN_DATA
reset_Mask : 0x0

PINASSIGN_DATA3 PINASSIGN_DATA3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DATA0 DATA1 DATA2 DATA3

DATA0 : T0_MAT3 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 0 - 7 (8 bit)
access : read-write

DATA1 : T0_CAP0 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 8 - 15 (8 bit)
access : read-write

DATA2 : T0_CAP1 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 16 - 23 (8 bit)
access : read-write

DATA3 : T0_CAP2 function assignment. The value is the pin number to be assigned to this function. The following pins are available: PIO0_0 (= 0) to PIO0_31 (= 0x1F) and from PIO1_0 (=0x20) to PIO1_21(=0x35).
bits : 24 - 31 (8 bit)
access : read-write



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.