\n
address_offset : 0x0 Bytes (0x0)
size : 0x30 byte (0x0)
mem_usage : registers
protection : not protected
Flash configuration register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FLASHTIM : Flash memory access time. FLASHTIM +1 is equal to the number of system clocks used for flash access.
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : ONE_SYSTEM_CLOCK_FLASH_ACCESS
1 system clock flash access time.
0x1 : TWO_SYSTEM_CLOCK_FLASH_ACCESS
2 system clock flash access time.
0x2 : THREE_SYSTEM_CLOCK_FLASH_ACCESS
3 system clock flash access time.
End of enumeration elements list.
Flash signature start address register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
START : Signature generation start address (corresponds to AHB byte address bits[18:2]).
bits : 0 - 16 (17 bit)
access : read-write
Flash signaure stop address register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
STOPA : Stop address for signature generation (the word specified by STOP is included in the address range). The address is in units of memory words, not bytes.
bits : 0 - 16 (17 bit)
access : read-write
STRTBIST : When this bit is written to 1, signature generation starts. At the end of signature generation, this bit is automatically cleared.
bits : 31 - 31 (1 bit)
access : read-write
Flash signature generation result register returns the flash signature produced by the embedded signature generator..
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SIG : 32-bit signature.
bits : 0 - 31 (32 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.