\n
address_offset : 0x0 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
EPTPC Reset Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RESET : EPTPC Software Reset
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Do not reset the EPTPC
#1 : 1
Reset the EPTPC. Do not access the EPTPC-related registers other than this register while a software reset is being issued.
End of enumeration elements list.
STCA Clock Select Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCLKDIV : PCLKA Clock Frequency Division
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
#001 : 001
1
#010 : 010
1/2
#011 : 011
1/3
#100 : 100
1/4
#101 : 101
1/5
#110 : 110
1/6
: others
Settings other than above are prohibited.
End of enumeration elements list.
SCLKSEL : STCA Clock Select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#000 : 000
PCLKA clock divided by 1 to 6
#010 : 010
Input clock from the REF50CK0 pin
#011 : 011
Input clock from the REF50CK1 pin
: others
Settings other than above are prohibited.
End of enumeration elements list.
Bypass 1588 module Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BYPASS0 : Bypass 1588 module for Ether 0ch
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
to use 1588 module for Ether 0ch
#1 : 1
to bypass 1588 module for Ether 0ch
End of enumeration elements list.
BYPASS1 : Bypass 1588 module for Ether 1ch
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : 0
to use 1588 module for Ether 1ch
#1 : 1
to bypass 1588 module for Ether 1ch
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.