\n
address_offset : 0x0 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
MemMirror Special Function Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MEMMIRADDR : Specifies the memory mirror address.NOTE: A value cannot be set in the low-order 7 bits. These bits are fixed to 0.
bits : 7 - 21 (15 bit)
access : read-write
KEY : MMSFR Key Code
bits : 24 - 30 (7 bit)
access : write-only
Enumeration:
0xDB : 0xDB
Writing to the MEMMIRADDR bits are valid, when the KEY bits are written 0xDB.
End of enumeration elements list.
MemMirror Enable Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Memory Mirror Function Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#1 : 1
Memory Mirror Function is enabled.
#0 : 0
Memory Mirror Function is disabled.
End of enumeration elements list.
KEY : MMEN Key Code
bits : 24 - 30 (7 bit)
access : write-only
Enumeration:
0xDB : 0xDB
Writing to the EN bit is valid, when the KEY bits are written 0xDB.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.