\n

EFC

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected

Registers

FMR

FCR

FSR

FRR


FMR

EEFC Flash Mode Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

FMR FMR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FRDY FWS SCOD FAM

FRDY : Ready Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write

FWS : Flash Wait State
bits : 8 - 11 (4 bit)
access : read-write

SCOD : Sequential Code Optimization Disable
bits : 16 - 16 (1 bit)
access : read-write

FAM : Flash Access Mode
bits : 24 - 24 (1 bit)
access : read-write


FCR

EEFC Flash Command Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

FCR FCR write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FCMD FARG FKEY

FCMD : Flash Command
bits : 0 - 7 (8 bit)
access : write-only

Enumeration:

0x00 : GETD

Get Flash Descriptor

0x01 : WP

Write page

0x02 : WPL

Write page and lock

0x03 : EWP

Erase page and write page

0x04 : EWPL

Erase page and write page then lock

0x05 : EA

Erase all

0x08 : SLB

Set Lock Bit

0x09 : CLB

Clear Lock Bit

0x0A : GLB

Get Lock Bit

0x0B : SGPB

Set GPNVM Bit

0x0C : CGPB

Clear GPNVM Bit

0x0D : GGPB

Get GPNVM Bit

0x0E : STUI

Start Read Unique Identifier

0x0F : SPUI

Stop Read Unique Identifier

End of enumeration elements list.

FARG : Flash Command Argument
bits : 8 - 23 (16 bit)
access : write-only

FKEY : Flash Writing Protection Key
bits : 24 - 31 (8 bit)
access : write-only

Enumeration:

0x5A : PASSWD

The 0x5A value enables the command defined by the bits of the register. If the field is written with a different value, the write is not performed and no action is started.

End of enumeration elements list.


FSR

EEFC Flash Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

FSR FSR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FRDY FCMDE FLOCKE

FRDY : Flash Ready Status
bits : 0 - 0 (1 bit)
access : read-only

FCMDE : Flash Command Error Status
bits : 1 - 1 (1 bit)
access : read-only

FLOCKE : Flash Lock Error Status
bits : 2 - 2 (1 bit)
access : read-only


FRR

EEFC Flash Result Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

FRR FRR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FVALUE

FVALUE : Flash Result Value
bits : 0 - 31 (32 bit)
access : read-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.