\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Enable CRYOTIMER
bits : 0 - 0 (1 bit)
access : read-write
DEBUGRUN : Debug Mode Run Enable
bits : 1 - 1 (1 bit)
access : read-write
OSCSEL : Select Low Frequency Oscillator
bits : 2 - 3 (2 bit)
access : read-write
Enumeration:
0x00000000 : LFRCO
Select Low Frequency RC Oscillator
0x00000001 : LFXO
Select Low Frequency Crystal Oscillator
0x00000002 : ULFRCO
Select Ultra Low Frequency RC Oscillator
End of enumeration elements list.
PRESC : Prescaler Setting
bits : 5 - 7 (3 bit)
access : read-write
Enumeration:
0x00000000 : DIV1
LF Oscillator frequency undivided
0x00000001 : DIV2
LF Oscillator frequency divided by 2
0x00000002 : DIV4
LF Oscillator frequency divided by 4
0x00000003 : DIV8
LF Oscillator frequency divided by 8
0x00000004 : DIV16
LF Oscillator frequency divided by 16
0x00000005 : DIV32
LF Oscillator frequency divided by 32
0x00000006 : DIV64
LF Oscillator frequency divided by 64
0x00000007 : DIV128
LF Oscillator frequency divided by 128
End of enumeration elements list.
Interrupt Flag Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PERIOD : Wakeup Event/Interrupt
bits : 0 - 0 (1 bit)
access : read-only
Interrupt Flag Set Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PERIOD : Set PERIOD Interrupt Flag
bits : 0 - 0 (1 bit)
access : write-only
Interrupt Flag Clear Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PERIOD : Clear PERIOD Interrupt Flag
bits : 0 - 0 (1 bit)
access : write-only
Interrupt Enable Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PERIOD : PERIOD Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
Interrupt Duration
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PERIODSEL : Interrupts/Wakeup Events Period Setting
bits : 0 - 5 (6 bit)
access : read-write
Counter Value
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
CNT : Counter Value
bits : 0 - 31 (32 bit)
access : read-only
Wake Up Enable
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4WU : EM4 Wake-up Enable
bits : 0 - 0 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.