\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected
EEFC Flash Mode Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRDY : Ready Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
FWS : Flash Wait State
bits : 8 - 11 (4 bit)
access : read-write
SCOD : Sequential Code Optimization Disable
bits : 16 - 16 (1 bit)
access : read-write
FAM : Flash Access Mode
bits : 24 - 24 (1 bit)
access : read-write
EEFC Flash Command Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
FCMD : Flash Command
bits : 0 - 7 (8 bit)
access : write-only
Enumeration:
0x00 : GETD
Get Flash Descriptor
0x01 : WP
Write page
0x02 : WPL
Write page and lock
0x03 : EWP
Erase page and write page
0x04 : EWPL
Erase page and write page then lock
0x05 : EA
Erase all
0x08 : SLB
Set Lock Bit
0x09 : CLB
Clear Lock Bit
0x0A : GLB
Get Lock Bit
0x0B : SGPB
Set GPNVM Bit
0x0C : CGPB
Clear GPNVM Bit
0x0D : GGPB
Get GPNVM Bit
0x0E : STUI
Start Read Unique Identifier
0x0F : SPUI
Stop Read Unique Identifier
End of enumeration elements list.
FARG : Flash Command Argument
bits : 8 - 23 (16 bit)
access : write-only
FKEY : Flash Writing Protection Key
bits : 24 - 31 (8 bit)
access : write-only
Enumeration:
0x5A : PASSWD
The 0x5A value enables the command defined by the bits of the register. If the field is written with a different value, the write is not performed and no action is started.
End of enumeration elements list.
EEFC Flash Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FRDY : Flash Ready Status
bits : 0 - 0 (1 bit)
access : read-only
FCMDE : Flash Command Error Status
bits : 1 - 1 (1 bit)
access : read-only
FLOCKE : Flash Lock Error Status
bits : 2 - 2 (1 bit)
access : read-only
EEFC Flash Result Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FVALUE : Flash Result Value
bits : 0 - 31 (32 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.