\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
Analog Comparator Masked Interrupt Status
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACMIS_IN0 : Comparator 0 Masked Interrupt Status
bits : 0 - 0 (1 bit)
COMP_ACMIS_IN1 : Comparator 1 Masked Interrupt Status
bits : 1 - 2 (2 bit)
Analog Comparator Masked Interrupt Status
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACMIS_IN0 : Comparator 0 Masked Interrupt Status
bits : 0 - 0 (1 bit)
COMP_ACMIS_IN1 : Comparator 1 Masked Interrupt Status
bits : 1 - 2 (2 bit)
Analog Comparator Reference Voltage Control
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACREFCTL_VREF : Resistor Ladder Voltage Ref
bits : 0 - 3 (4 bit)
COMP_ACREFCTL_RNG : Resistor Ladder Range
bits : 8 - 16 (9 bit)
COMP_ACREFCTL_EN : Resistor Ladder Enable
bits : 9 - 18 (10 bit)
Analog Comparator Reference Voltage Control
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACREFCTL_VREF : Resistor Ladder Voltage Ref
bits : 0 - 3 (4 bit)
COMP_ACREFCTL_RNG : Resistor Ladder Range
bits : 8 - 16 (9 bit)
COMP_ACREFCTL_EN : Resistor Ladder Enable
bits : 9 - 18 (10 bit)
Analog Comparator Status 0
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACSTAT0_OVAL : Comparator Output Value
bits : 1 - 2 (2 bit)
Analog Comparator Status 0
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACSTAT0_OVAL : Comparator Output Value
bits : 1 - 2 (2 bit)
Analog Comparator Control 0
address_offset : 0x24 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACCTL0_CINV : Comparator Output Invert
bits : 1 - 2 (2 bit)
COMP_ACCTL0_ISEN : Interrupt Sense
bits : 2 - 5 (4 bit)
Enumeration:
0x0 : COMP_ACCTL0_ISEN_LEVEL
Level sense, see ISLVAL
0x1 : COMP_ACCTL0_ISEN_FALL
Falling edge
0x2 : COMP_ACCTL0_ISEN_RISE
Rising edge
0x3 : COMP_ACCTL0_ISEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL0_ISLVAL : Interrupt Sense Level Value
bits : 4 - 8 (5 bit)
COMP_ACCTL0_TSEN : Trigger Sense
bits : 5 - 11 (7 bit)
Enumeration:
0x0 : COMP_ACCTL0_TSEN_LEVEL
Level sense, see TSLVAL
0x1 : COMP_ACCTL0_TSEN_FALL
Falling edge
0x2 : COMP_ACCTL0_TSEN_RISE
Rising edge
0x3 : COMP_ACCTL0_TSEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL0_TSLVAL : Trigger Sense Level Value
bits : 7 - 14 (8 bit)
COMP_ACCTL0_ASRCP : Analog Source Positive
bits : 9 - 19 (11 bit)
Enumeration:
0x0 : COMP_ACCTL0_ASRCP_PIN
Pin value of Cn+
0x1 : COMP_ACCTL0_ASRCP_PIN0
Pin value of C0+
0x2 : COMP_ACCTL0_ASRCP_REF
Internal voltage reference (VIREF)
End of enumeration elements list.
COMP_ACCTL0_TOEN : Trigger Output Enable
bits : 11 - 22 (12 bit)
Analog Comparator Control 0
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACCTL0_CINV : Comparator Output Invert
bits : 1 - 2 (2 bit)
COMP_ACCTL0_ISEN : Interrupt Sense
bits : 2 - 5 (4 bit)
Enumeration:
0x0 : COMP_ACCTL0_ISEN_LEVEL
Level sense, see ISLVAL
0x1 : COMP_ACCTL0_ISEN_FALL
Falling edge
0x2 : COMP_ACCTL0_ISEN_RISE
Rising edge
0x3 : COMP_ACCTL0_ISEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL0_ISLVAL : Interrupt Sense Level Value
bits : 4 - 8 (5 bit)
COMP_ACCTL0_TSEN : Trigger Sense
bits : 5 - 11 (7 bit)
Enumeration:
0x0 : COMP_ACCTL0_TSEN_LEVEL
Level sense, see TSLVAL
0x1 : COMP_ACCTL0_TSEN_FALL
Falling edge
0x2 : COMP_ACCTL0_TSEN_RISE
Rising edge
0x3 : COMP_ACCTL0_TSEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL0_TSLVAL : Trigger Sense Level Value
bits : 7 - 14 (8 bit)
COMP_ACCTL0_ASRCP : Analog Source Positive
bits : 9 - 19 (11 bit)
Enumeration:
0x0 : COMP_ACCTL0_ASRCP_PIN
Pin value of Cn+
0x1 : COMP_ACCTL0_ASRCP_PIN0
Pin value of C0+
0x2 : COMP_ACCTL0_ASRCP_REF
Internal voltage reference (VIREF)
End of enumeration elements list.
COMP_ACCTL0_TOEN : Trigger Output Enable
bits : 11 - 22 (12 bit)
Analog Comparator Raw Interrupt Status
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACRIS_IN0 : Comparator 0 Interrupt Status
bits : 0 - 0 (1 bit)
COMP_ACRIS_IN1 : Comparator 1 Interrupt Status
bits : 1 - 2 (2 bit)
Analog Comparator Raw Interrupt Status
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACRIS_IN0 : Comparator 0 Interrupt Status
bits : 0 - 0 (1 bit)
COMP_ACRIS_IN1 : Comparator 1 Interrupt Status
bits : 1 - 2 (2 bit)
Analog Comparator Status 1
address_offset : 0x40 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACSTAT1_OVAL : Comparator Output Value
bits : 1 - 2 (2 bit)
Analog Comparator Status 1
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACSTAT1_OVAL : Comparator Output Value
bits : 1 - 2 (2 bit)
Analog Comparator Control 1
address_offset : 0x44 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACCTL1_CINV : Comparator Output Invert
bits : 1 - 2 (2 bit)
COMP_ACCTL1_ISEN : Interrupt Sense
bits : 2 - 5 (4 bit)
Enumeration:
0x0 : COMP_ACCTL1_ISEN_LEVEL
Level sense, see ISLVAL
0x1 : COMP_ACCTL1_ISEN_FALL
Falling edge
0x2 : COMP_ACCTL1_ISEN_RISE
Rising edge
0x3 : COMP_ACCTL1_ISEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL1_ISLVAL : Interrupt Sense Level Value
bits : 4 - 8 (5 bit)
COMP_ACCTL1_TSEN : Trigger Sense
bits : 5 - 11 (7 bit)
Enumeration:
0x0 : COMP_ACCTL1_TSEN_LEVEL
Level sense, see TSLVAL
0x1 : COMP_ACCTL1_TSEN_FALL
Falling edge
0x2 : COMP_ACCTL1_TSEN_RISE
Rising edge
0x3 : COMP_ACCTL1_TSEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL1_TSLVAL : Trigger Sense Level Value
bits : 7 - 14 (8 bit)
COMP_ACCTL1_ASRCP : Analog Source Positive
bits : 9 - 19 (11 bit)
Enumeration:
0x0 : COMP_ACCTL1_ASRCP_PIN
Pin value of Cn+
0x1 : COMP_ACCTL1_ASRCP_PIN0
Pin value of C0+
0x2 : COMP_ACCTL1_ASRCP_REF
Internal voltage reference (VIREF)
End of enumeration elements list.
COMP_ACCTL1_TOEN : Trigger Output Enable
bits : 11 - 22 (12 bit)
Analog Comparator Control 1
address_offset : 0x44 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACCTL1_CINV : Comparator Output Invert
bits : 1 - 2 (2 bit)
COMP_ACCTL1_ISEN : Interrupt Sense
bits : 2 - 5 (4 bit)
Enumeration:
0x0 : COMP_ACCTL1_ISEN_LEVEL
Level sense, see ISLVAL
0x1 : COMP_ACCTL1_ISEN_FALL
Falling edge
0x2 : COMP_ACCTL1_ISEN_RISE
Rising edge
0x3 : COMP_ACCTL1_ISEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL1_ISLVAL : Interrupt Sense Level Value
bits : 4 - 8 (5 bit)
COMP_ACCTL1_TSEN : Trigger Sense
bits : 5 - 11 (7 bit)
Enumeration:
0x0 : COMP_ACCTL1_TSEN_LEVEL
Level sense, see TSLVAL
0x1 : COMP_ACCTL1_TSEN_FALL
Falling edge
0x2 : COMP_ACCTL1_TSEN_RISE
Rising edge
0x3 : COMP_ACCTL1_TSEN_BOTH
Either edge
End of enumeration elements list.
COMP_ACCTL1_TSLVAL : Trigger Sense Level Value
bits : 7 - 14 (8 bit)
COMP_ACCTL1_ASRCP : Analog Source Positive
bits : 9 - 19 (11 bit)
Enumeration:
0x0 : COMP_ACCTL1_ASRCP_PIN
Pin value of Cn+
0x1 : COMP_ACCTL1_ASRCP_PIN0
Pin value of C0+
0x2 : COMP_ACCTL1_ASRCP_REF
Internal voltage reference (VIREF)
End of enumeration elements list.
COMP_ACCTL1_TOEN : Trigger Output Enable
bits : 11 - 22 (12 bit)
Analog Comparator Interrupt Enable
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACINTEN_IN0 : Comparator 0 Interrupt Enable
bits : 0 - 0 (1 bit)
COMP_ACINTEN_IN1 : Comparator 1 Interrupt Enable
bits : 1 - 2 (2 bit)
Analog Comparator Interrupt Enable
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_ACINTEN_IN0 : Comparator 0 Interrupt Enable
bits : 0 - 0 (1 bit)
COMP_ACINTEN_IN1 : Comparator 1 Interrupt Enable
bits : 1 - 2 (2 bit)
Analog Comparator Peripheral Properties
address_offset : 0xFC0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_PP_CMP0 : Comparator 0 Present
bits : 0 - 0 (1 bit)
COMP_PP_CMP1 : Comparator 1 Present
bits : 1 - 2 (2 bit)
COMP_PP_CMP2 : Comparator 2 Present
bits : 2 - 4 (3 bit)
COMP_PP_C0O : Comparator Output 0 Present
bits : 16 - 32 (17 bit)
COMP_PP_C1O : Comparator Output 1 Present
bits : 17 - 34 (18 bit)
COMP_PP_C2O : Comparator Output 2 Present
bits : 18 - 36 (19 bit)
Analog Comparator Peripheral Properties
address_offset : 0xFC0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP_PP_CMP0 : Comparator 0 Present
bits : 0 - 0 (1 bit)
COMP_PP_CMP1 : Comparator 1 Present
bits : 1 - 2 (2 bit)
COMP_PP_CMP2 : Comparator 2 Present
bits : 2 - 4 (3 bit)
COMP_PP_C0O : Comparator Output 0 Present
bits : 16 - 32 (17 bit)
COMP_PP_C1O : Comparator Output 1 Present
bits : 17 - 34 (18 bit)
COMP_PP_C2O : Comparator Output 2 Present
bits : 18 - 36 (19 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.