\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
EEPROM Size Information
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EESIZE_WORDCNT : Number of 32-Bit Words
bits : 0 - 15 (16 bit)
EEPROM_EESIZE_BLKCNT : Number of 16-Word Blocks
bits : 16 - 42 (27 bit)
EEPROM Size Information
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EESIZE_WORDCNT : Number of 32-Bit Words
bits : 0 - 15 (16 bit)
EEPROM_EESIZE_BLKCNT : Number of 16-Word Blocks
bits : 16 - 42 (27 bit)
EEPROM Read-Write
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EERDWR_VALUE : EEPROM Read or Write Data
bits : 0 - 31 (32 bit)
EEPROM Read-Write
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EERDWR_VALUE : EEPROM Read or Write Data
bits : 0 - 31 (32 bit)
EEPROM Read-Write with Increment
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EERDWRINC_VALUE : EEPROM Read or Write Data with Increment
bits : 0 - 31 (32 bit)
EEPROM Read-Write with Increment
address_offset : 0x14 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EERDWRINC_VALUE : EEPROM Read or Write Data with Increment
bits : 0 - 31 (32 bit)
EEPROM Done Status
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEDONE_WORKING : EEPROM Working
bits : 0 - 0 (1 bit)
EEPROM_EEDONE_WKERASE : Working on an Erase
bits : 2 - 4 (3 bit)
EEPROM_EEDONE_WKCOPY : Working on a Copy
bits : 3 - 6 (4 bit)
EEPROM_EEDONE_NOPERM : Write Without Permission
bits : 4 - 8 (5 bit)
EEPROM_EEDONE_WRBUSY : Write Busy
bits : 5 - 10 (6 bit)
EEPROM_EEDONE_INVPL : Invalid Program Voltage Level
bits : 8 - 16 (9 bit)
EEPROM Done Status
address_offset : 0x18 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEDONE_WORKING : EEPROM Working
bits : 0 - 0 (1 bit)
EEPROM_EEDONE_WKERASE : Working on an Erase
bits : 2 - 4 (3 bit)
EEPROM_EEDONE_WKCOPY : Working on a Copy
bits : 3 - 6 (4 bit)
EEPROM_EEDONE_NOPERM : Write Without Permission
bits : 4 - 8 (5 bit)
EEPROM_EEDONE_WRBUSY : Write Busy
bits : 5 - 10 (6 bit)
EEPROM_EEDONE_INVPL : Invalid Program Voltage Level
bits : 8 - 16 (9 bit)
EEPROM Support Control and Status
address_offset : 0x1C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EESUPP_START : Start Erase
bits : 0 - 0 (1 bit)
EEPROM_EESUPP_EREQ : Erase Required
bits : 1 - 2 (2 bit)
EEPROM_EESUPP_ERETRY : Erase Must Be Retried
bits : 2 - 4 (3 bit)
EEPROM_EESUPP_PRETRY : Programming Must Be Retried
bits : 3 - 6 (4 bit)
EEPROM Support Control and Status
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EESUPP_START : Start Erase
bits : 0 - 0 (1 bit)
EEPROM_EESUPP_EREQ : Erase Required
bits : 1 - 2 (2 bit)
EEPROM_EESUPP_ERETRY : Erase Must Be Retried
bits : 2 - 4 (3 bit)
EEPROM_EESUPP_PRETRY : Programming Must Be Retried
bits : 3 - 6 (4 bit)
EEPROM Unlock
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEUNLOCK_UNLOCK : EEPROM Unlock
bits : 0 - 31 (32 bit)
EEPROM Unlock
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEUNLOCK_UNLOCK : EEPROM Unlock
bits : 0 - 31 (32 bit)
EEPROM Protection
address_offset : 0x30 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPROT_PROT : Protection Control
bits : 0 - 2 (3 bit)
Enumeration:
0x0 : EEPROM_EEPROT_PROT_RWNPW
This setting is the default. If there is no password, the block is not protected and is readable and writable
0x1 : EEPROM_EEPROT_PROT_RWPW
If there is a password, the block is readable or writable only when unlocked
0x2 : EEPROM_EEPROT_PROT_RONPW
If there is no password, the block is readable, not writable
End of enumeration elements list.
EEPROM_EEPROT_ACC : Access Control
bits : 3 - 6 (4 bit)
EEPROM Protection
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPROT_PROT : Protection Control
bits : 0 - 2 (3 bit)
Enumeration:
0x0 : EEPROM_EEPROT_PROT_RWNPW
This setting is the default. If there is no password, the block is not protected and is readable and writable
0x1 : EEPROM_EEPROT_PROT_RWPW
If there is a password, the block is readable or writable only when unlocked
0x2 : EEPROM_EEPROT_PROT_RONPW
If there is no password, the block is readable, not writable
End of enumeration elements list.
EEPROM_EEPROT_ACC : Access Control
bits : 3 - 6 (4 bit)
EEPROM Password
address_offset : 0x34 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS0_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Password
address_offset : 0x34 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS0_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Password
address_offset : 0x38 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS1_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Password
address_offset : 0x38 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS1_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Password
address_offset : 0x3C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS2_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Password
address_offset : 0x3C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPASS2_PASS : Password
bits : 0 - 31 (32 bit)
EEPROM Current Block
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEBLOCK_BLOCK : Current Block
bits : 0 - 15 (16 bit)
EEPROM Current Block
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEBLOCK_BLOCK : Current Block
bits : 0 - 15 (16 bit)
EEPROM Interrupt
address_offset : 0x40 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEINT_INT : Interrupt Enable
bits : 0 - 0 (1 bit)
EEPROM Interrupt
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEINT_INT : Interrupt Enable
bits : 0 - 0 (1 bit)
EEPROM Block Hide
address_offset : 0x50 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEHIDE_HN : Hide Block
bits : 1 - 32 (32 bit)
EEPROM Block Hide
address_offset : 0x50 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEHIDE_HN : Hide Block
bits : 1 - 32 (32 bit)
EEPROM Current Offset
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEOFFSET_OFFSET : Current Address Offset
bits : 0 - 3 (4 bit)
EEPROM Current Offset
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEOFFSET_OFFSET : Current Address Offset
bits : 0 - 3 (4 bit)
EEPROM Debug Mass Erase
address_offset : 0x80 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEDBGME_ME : Mass Erase
bits : 0 - 0 (1 bit)
EEPROM_EEDBGME_KEY : Erase Key
bits : 16 - 47 (32 bit)
EEPROM Debug Mass Erase
address_offset : 0x80 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEDBGME_ME : Mass Erase
bits : 0 - 0 (1 bit)
EEPROM_EEDBGME_KEY : Erase Key
bits : 16 - 47 (32 bit)
EEPROM
address_offset : 0xFC0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPROMPP_SIZE : EEPROM Size
bits : 0 - 4 (5 bit)
EEPROM
address_offset : 0xFC0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EEPROM_EEPROMPP_SIZE : EEPROM Size
bits : 0 - 4 (5 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.