\n
address_offset : 0x0 Bytes (0x0)
size : 0x14 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x38 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x28 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x34 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x24 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x1C Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x14 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : reserved
protection : not protected
Port L Data Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0 : PL0
bits : 0 - 0 (1 bit)
access : read-write
PL1 : PL1
bits : 1 - 1 (1 bit)
access : read-write
PL2 : PL2
bits : 2 - 2 (1 bit)
access : read-write
PL3 : PL3
bits : 3 - 3 (1 bit)
access : read-write
Port L Function Register 3
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0F3 : PL0F3
bits : 0 - 0 (1 bit)
access : read-write
PL3F3 : PL3F3
bits : 3 - 3 (1 bit)
access : read-write
Port L Function Register 6
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0F6 : PL0F6
bits : 0 - 0 (1 bit)
access : read-write
PL3F6 : PL3F6
bits : 3 - 3 (1 bit)
access : read-write
Port L Function Register 7
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0F7 : PL0F7
bits : 0 - 0 (1 bit)
access : read-write
PL1F7 : PL1F7
bits : 1 - 1 (1 bit)
access : read-write
PL2F7 : PL2F7
bits : 2 - 2 (1 bit)
access : read-write
PL3F7 : PL3F7
bits : 3 - 3 (1 bit)
access : read-write
Port L Open Drain Control Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0OD : PL0OD
bits : 0 - 0 (1 bit)
access : read-write
PL1OD : PL1OD
bits : 1 - 1 (1 bit)
access : read-write
PL2OD : PL2OD
bits : 2 - 2 (1 bit)
access : read-write
PL3OD : PL3OD
bits : 3 - 3 (1 bit)
access : read-write
Port L Pull-up Control Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0UP : PL0UP
bits : 0 - 0 (1 bit)
access : read-write
PL1UP : PL1UP
bits : 1 - 1 (1 bit)
access : read-write
PL2UP : PL2UP
bits : 2 - 2 (1 bit)
access : read-write
PL3UP : PL3UP
bits : 3 - 3 (1 bit)
access : read-write
Port L Pull-down Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0DN : PL0DN
bits : 0 - 0 (1 bit)
access : read-write
PL1DN : PL1DN
bits : 1 - 1 (1 bit)
access : read-write
PL2DN : PL2DN
bits : 2 - 2 (1 bit)
access : read-write
PL3DN : PL3DN
bits : 3 - 3 (1 bit)
access : read-write
Port L Input Control Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0IE : PL0IE
bits : 0 - 0 (1 bit)
access : read-write
PL1IE : PL1IE
bits : 1 - 1 (1 bit)
access : read-write
PL2IE : PL2IE
bits : 2 - 2 (1 bit)
access : read-write
PL3IE : PL3IE
bits : 3 - 3 (1 bit)
access : read-write
Port L Output Control Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0C : PL0C
bits : 0 - 0 (1 bit)
access : read-write
PL1C : PL1C
bits : 1 - 1 (1 bit)
access : read-write
PL2C : PL2C
bits : 2 - 2 (1 bit)
access : read-write
PL3C : PL3C
bits : 3 - 3 (1 bit)
access : read-write
Port L Function Register 1
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Port L Function Register 2
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PL0F2 : PL0F2
bits : 0 - 0 (1 bit)
access : read-write
PL3F2 : PL3F2
bits : 3 - 3 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.