\n
address_offset : 0x0 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x38 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x28 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x34 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x8 Bytes (0x0)
size : 0x20 byte (0x0)
mem_usage : reserved
protection : not protected
Port H Data Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0 : PH0
bits : 0 - 0 (1 bit)
access : read-write
PH1 : PH1
bits : 1 - 1 (1 bit)
access : read-write
Port H Open Drain Control Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0OD : PH0OD
bits : 0 - 0 (1 bit)
access : read-write
PH1OD : PH1OD
bits : 1 - 1 (1 bit)
access : read-write
Port H Pull-up Control Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0UP : PH0UP
bits : 0 - 0 (1 bit)
access : read-write
PH1UP : PH1UP
bits : 1 - 1 (1 bit)
access : read-write
Port H Pull-down Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0DN : PH0DN
bits : 0 - 0 (1 bit)
access : read-write
PH1DN : PH1DN
bits : 1 - 1 (1 bit)
access : read-write
Port H Input Control Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0IE : PH0IE
bits : 0 - 0 (1 bit)
access : read-write
PH1IE : PH1IE
bits : 1 - 1 (1 bit)
access : read-write
Port H Output Control Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0C : PH0C
bits : 0 - 0 (1 bit)
access : read-write
PH1C : PH1C
bits : 1 - 1 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.