\n

Analog

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection :

Registers

INTCLR

INTSEL

INTSTA


INTCLR

Interrupt clear register
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

INTCLR INTCLR write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CLR_ADC_SOFTCONV CLR_ADC_SEQ CLR_DCOMP CLR_ACOMP CLR_IDAC_TSHUT CLR_IDAC_EXTRESLOW CLR_RDECC_ERR CLR_WRECC_ERR

CLR_ADC_SOFTCONV : Write 1 to this bit to clear the ADC software conversion interrupt flag
bits : 0 - 0 (1 bit)

CLR_ADC_SEQ : Write 1 to this bit to clear the ADC sequence conversion interrupt flag
bits : 1 - 1 (1 bit)

CLR_DCOMP : Write 1 to this bit to clear the digital compare interrupt flag
bits : 2 - 2 (1 bit)

CLR_ACOMP : Write 1 to this bit to clear the analog compare interrupt flag
bits : 3 - 3 (1 bit)

CLR_IDAC_TSHUT : Write 1 to this bit to clear the IDAC TSHUT interrupt flag
bits : 4 - 4 (1 bit)

CLR_IDAC_EXTRESLOW : Write 1 to this bit to clear the IDAC EXTRESLOW interrupt flag
bits : 5 - 5 (1 bit)

CLR_RDECC_ERR : Write 1 to this bit to clear the read ECC error interrupt flag
bits : 6 - 6 (1 bit)

CLR_WRECC_ERR : Write 1 to this bit to clear the write ECC error interrupt flag
bits : 7 - 7 (1 bit)


INTSEL

Interrupt mask register
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTSEL INTSEL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SEL_ADC_SOFTCONV_1 SEL_ADC_SEQ_1 SEL_DCOMP_1 SEL_ACOMP_1 SEL_IDAC_TSHUT_1 SLE_IDAC_EXTRESLOW_1 SEL_RDECC_ERR_1 SEL_WRECC_ERR_1 SEL_ADC_SOFTCONV_0 SEL_ADC_SEQ_0 SEL_DCOMP_0 SEL_ACOMP_0 SEL_IDAC_TSHUT_0 SLE_IDAC_EXTRESLOW_0 SEL_RDECC_ERR_0 SEL_WRECC_ERR_0

SEL_ADC_SOFTCONV_1 : Write 1 to this bit to enable ADC software conversion interrupt for interrupt pin 1
bits : 0 - 0 (1 bit)

SEL_ADC_SEQ_1 : Write 1 to this bit to enable ADC sequence conversion interrupt for interrupt pin 1
bits : 1 - 1 (1 bit)

SEL_DCOMP_1 : Write 1 to this bit to enable digital comparator interrupt for interrupt pin 1
bits : 2 - 2 (1 bit)

SEL_ACOMP_1 : Write 1 to this bit to enable analog comparator interrupt for interrupt pin 1
bits : 3 - 3 (1 bit)

SEL_IDAC_TSHUT_1 : Write 1 to this bit to enable IDAC TSHUT interrupt for interrupt pin 1
bits : 4 - 4 (1 bit)

SLE_IDAC_EXTRESLOW_1 : Write 1 to this bit to enable IDAC EXTRESLOW interrupt for interrupt pin 1
bits : 5 - 5 (1 bit)

SEL_RDECC_ERR_1 : Write 1 to this bit to enable read ECC error interrupt for interrupt pin 1
bits : 6 - 6 (1 bit)

SEL_WRECC_ERR_1 : Write 1 to this bit to enable write ECC error interrupt for interrupt pin 1
bits : 7 - 7 (1 bit)

SEL_ADC_SOFTCONV_0 : Write 1 to this bit to enable ADC software conversion interrupt for interrupt pin 0
bits : 8 - 8 (1 bit)

SEL_ADC_SEQ_0 : Write 1 to this bit to enable ADC sequence conversion interrupt for interrupt pin 0
bits : 9 - 9 (1 bit)

SEL_DCOMP_0 : Write 1 to this bit to enable digital comparator interrupt for interrupt pin 0
bits : 10 - 10 (1 bit)

SEL_ACOMP_0 : Write 1 to this bit to enable analog comparator interrupt for interrupt pin 0
bits : 11 - 11 (1 bit)

SEL_IDAC_TSHUT_0 : Write 1 to this bit to enable IDAC TSHUT interrupt for interrupt pin 0
bits : 12 - 12 (1 bit)

SLE_IDAC_EXTRESLOW_0 : Write 1 to this bit to enable IDAC EXTRESLOW interrupt for interrupt pin 0
bits : 13 - 13 (1 bit)

SEL_RDECC_ERR_0 : Write 1 to this bit to enable read ECC error interrupt for interrupt pin 0
bits : 14 - 14 (1 bit)

SEL_WRECC_ERR_0 : Write 1 to this bit to enable write ECC error interrupt for interrupt pin 0
bits : 15 - 15 (1 bit)


INTSTA

Interrupt status register
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

INTSTA INTSTA read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ADC_SOFTCONV ADC_SEQ DCOMP ACOMP IDAC_TSHUT IDAC_EXTRESLOW RDECC_ERR WRECC_ERR

ADC_SOFTCONV : ADC software conversion interrupt status
bits : 0 - 0 (1 bit)

ADC_SEQ : ADC sequence interrupt status
bits : 1 - 1 (1 bit)

DCOMP : Digital comparator interrupt status
bits : 2 - 2 (1 bit)

ACOMP : Analog comparator interrupt status
bits : 3 - 3 (1 bit)

IDAC_TSHUT : IDAC temperature TSHT interrupt status
bits : 4 - 4 (1 bit)

IDAC_EXTRESLOW : IDAC EXTRESLOW interrupt status
bits : 5 - 5 (1 bit)

RDECC_ERR : Read data ECC error interrupt status
bits : 6 - 6 (1 bit)

WRECC_ERR : Write data ECC error interrupt status
bits : 7 - 7 (1 bit)



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.