\n
address_offset : 0x0 Bytes (0x0)
size : 0x28 byte (0x0)
mem_usage : registers
protection :
GPIO Port 3 configuration
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CON0 : p3.0 configuration bits
bits : 0 - 1 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : PRTADDR0
MDIO PRTADDR0
3 : PLAI12
PLAI[12]
End of enumeration elements list.
CON1 : p3.1 configuration bits
bits : 2 - 3 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : PRTADDR1
MDIO PRTADDR1
3 : PLAI13
PLAI[13]
End of enumeration elements list.
CON2 : p3.2 configuration bits
bits : 4 - 5 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : PRTADDR2
MDIO PRTADDR2
3 : PLAI14
PLAI[14]
End of enumeration elements list.
CON3 : p3.3 configuration bits
bits : 6 - 7 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : PRTADDR3
MDIO PRTADDR3
3 : PLAI15
PLAI[15]
End of enumeration elements list.
CON4 : p3.4 configuration bits
bits : 8 - 9 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : PRTADDR4
MDIO PRTADDR4
3 : PLAO12
PLAO[12]
End of enumeration elements list.
CON5 : p3.5 configuration bits
bits : 10 - 11 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : MCLK
MDIO MCK
3 : PLAO13
PLAO[13]
End of enumeration elements list.
CON6 : p3.6 configuration bits
bits : 12 - 13 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : MDIO
MDIO
3 : PLAO14
PLAO[14]
End of enumeration elements list.
CON7 : p3.7 configuration bits
bits : 14 - 15 (2 bit)
Enumeration:
0 : GPIO
GPIO
1 : VDAC2
VDAC2
3 : PLAO15
PLAO[15]
End of enumeration elements list.
GPIO Port 3 registered data input
address_offset : 0x10 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IN0 : Registered data input
bits : 0 - 0 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN1 : Registered data input
bits : 1 - 1 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN2 : Registered data input
bits : 2 - 2 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN3 : Registered data input
bits : 3 - 3 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN4 : Registered data input
bits : 4 - 4 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN5 : Registered data input
bits : 5 - 5 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN6 : Registered data input
bits : 6 - 6 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
IN7 : Registered data input
bits : 7 - 7 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
GPIO Port 3 data output
address_offset : 0x14 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUT0 : Data out
bits : 0 - 0 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT1 : Data out
bits : 1 - 1 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT2 : Data out
bits : 2 - 2 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT3 : Data out
bits : 3 - 3 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT4 : Data out
bits : 4 - 4 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT5 : Data out
bits : 5 - 5 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT6 : Data out
bits : 6 - 6 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
OUT7 : Data out
bits : 7 - 7 (1 bit)
Enumeration:
0 : LOW
1 : HIGH
End of enumeration elements list.
GPIO Port 3 data out set
address_offset : 0x18 Bytes (0x0)
size : 8 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
SET0 : Set the output HIGH for the pin
bits : 0 - 0 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET1 : Set the output HIGH for the pin
bits : 1 - 1 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET2 : Set the output HIGH for the pin
bits : 2 - 2 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET3 : Set the output HIGH for the pin
bits : 3 - 3 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET4 : Set the output HIGH for the pin
bits : 4 - 4 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET5 : Set the output HIGH for the pin
bits : 5 - 5 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET6 : Set the output HIGH for the pin
bits : 6 - 6 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
SET7 : Set the output HIGH for the pin
bits : 7 - 7 (1 bit)
Enumeration:
1 : SET
End of enumeration elements list.
GPIO Port 3 data out clear
address_offset : 0x1C Bytes (0x0)
size : 8 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CLR0 : Set the output low for the port pin
bits : 0 - 0 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR1 : Set the output low for the port pin
bits : 1 - 1 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR2 : Set the output low for the port pin
bits : 2 - 2 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR3 : Set the output low for the port pin
bits : 3 - 3 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR4 : Set the output low for the port pin
bits : 4 - 4 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR5 : Set the output low for the port pin
bits : 5 - 5 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR6 : Set the output low for the port pin
bits : 6 - 6 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
CLR7 : Set the output low for the port pin
bits : 7 - 7 (1 bit)
Enumeration:
1 : CLR
End of enumeration elements list.
GPIO Port 3 pin toggle
address_offset : 0x20 Bytes (0x0)
size : 8 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TGL0 : Toggle the output of the port pin
bits : 0 - 0 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL1 : Toggle the output of the port pin
bits : 1 - 1 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL2 : Toggle the output of the port pin
bits : 2 - 2 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL3 : Toggle the output of the port pin
bits : 3 - 3 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL4 : Toggle the output of the port pin
bits : 4 - 4 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL5 : Toggle the output of the port pin
bits : 5 - 5 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL6 : Toggle the output of the port pin
bits : 6 - 6 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
TGL7 : Toggle the output of the port pin
bits : 7 - 7 (1 bit)
Enumeration:
1 : TGL
End of enumeration elements list.
GPIO Port 3 open drain enable
address_offset : 0x24 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ODE0 : Open drain enable
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE1 : Open drain enable
bits : 1 - 1 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE2 : Open drain enable
bits : 2 - 2 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE3 : Open drain enable
bits : 3 - 3 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE4 : Open drain enable
bits : 4 - 4 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE5 : Open drain enable
bits : 5 - 5 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE6 : Open drain enable
bits : 6 - 6 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
ODE7 : Open drain enable
bits : 7 - 7 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
GPIO Port 3 output enable
address_offset : 0x4 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OE0 : Pin Output Drive enable
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE1 : Pin Output Drive enable
bits : 1 - 1 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE2 : Pin Output Drive enable
bits : 2 - 2 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE3 : Pin Output Drive enable
bits : 3 - 3 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE4 : Pin Output Drive enable
bits : 4 - 4 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE5 : Pin Output Drive enable
bits : 5 - 5 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE6 : Pin Output Drive enable
bits : 6 - 6 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
OE7 : Pin Output Drive enable
bits : 7 - 7 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
GPIO Port 3 pullup enable
address_offset : 0x8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PUL0 : Pin Pull up enable
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL1 : Pin Pull up enable
bits : 1 - 1 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL2 : Pin Pull up enable
bits : 2 - 2 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL3 : Pin Pull up enable
bits : 3 - 3 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL4 : Pin Pull up enable
bits : 4 - 4 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL5 : Pin Pull up enable
bits : 5 - 5 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL6 : Pin Pull up enable
bits : 6 - 6 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
PUL7 : Pin Pull up enable
bits : 7 - 7 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
GPIO Port 3 input path enable
address_offset : 0xC Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IEN0 : Input path enable
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN1 : Input path enable
bits : 1 - 1 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN2 : Input path enable
bits : 2 - 2 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN3 : Input path enable
bits : 3 - 3 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN4 : Input path enable
bits : 4 - 4 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN5 : Input path enable
bits : 5 - 5 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN6 : Input path enable
bits : 6 - 6 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
IEN7 : Input path enable
bits : 7 - 7 (1 bit)
Enumeration:
0 : DIS
1 : EN
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.