Name : TLE9868
Flash : 128 kB
Flash bank : 0x1F000 Bytes @ 0x11000000
Flash bank : 0x1000 Bytes @ 0x1101F000
RAM : 4 kB
RAM : 0x00001000 Bytes @ 0x00001000
description : TLE9868QXB20
Architecture : ARM Cortex-M3 (CM3)
revision : r0p0
endian : little
Number of relevant bits in Interrupt priority : 4
name : ADC1
description : ADC1 Module
base address : 0x0
Interrupt (3) ADC1_VREF5_Int : Interrupt node 3: ADC1, VAREF
name : ADC2
description : ADC2 Module
base address : 0x0
Interrupt (2) ADC2_Tmr3_Int : Interrupt node 2: ADC2, Timer3, BEMF
name : ADC34
description : ADC34
base address : 0x0
name : BDRV
description : Bridge Driver
base address : 0x0
Interrupt (14) BDRV_CP_Int : Interrupt node14: BDRV, Charge Pump
name : CCU6
description : Capture Compare Unit 6
base address : 0x0
Interrupt (4) CCU6_SR0_Int : Interrupt node 4: CCU6 node0
Interrupt (5) CCU6_SR1_Int : Interrupt node 5: CCU6 node1
Interrupt (6) CCU6_SR2_Int : Interrupt node 6: CCU6 node2
Interrupt (7) CCU6_SR3_Int : Interrupt node 7: CCU6 node3
name : CPU
description : CPU Core
base address : 0x0
name : GPT12E
description : General Purpose Timer 12E
base address : 0x0
Interrupt (0) GPT1_Int : Interrupt node 0: GPT1 Block
Interrupt (1) GPT2_Int : Interrupt node 1: GPT2 Block
name : LIN
description : Local Interconnect Network
base address : 0x0
name : MF
description : Measurement Function
base address : 0x0
name : PMU
description : Power Management Unit
base address : 0x0
name : PORT
description : GPIO PORTs
base address : 0x0
name : SCU
description : System Control Unit
base address : 0x0
Interrupt (12) EXINT0_MON_Int : Interrupt node12: EINT0, MON
Interrupt (13) EXINT1_Int : Interrupt node13: EINT1
name : SCUPM
description : System Control Unit for Power Modules
base address : 0x0
name : SSC1
description : SSC1 Module
base address : 0x0
Interrupt (8) SSC1_Int : Interrupt node 8: SSC1
name : SSC2
description : SSC2 Module
base address : 0x0
Interrupt (9) SSC2_Int : Interrupt node 9: SSC2
name : TIMER2
description : TIMER2 Module
base address : 0x0
name : TIMER21
description : TIMER21 Module
base address : 0x0
name : TIMER3
description : TIMER3 Module
base address : 0x0
name : UART1
description : UART1 Module
base address : 0x0
Interrupt (10) UART1_LIN_Tmr2_Int : Interrupt node10: UART1(ASC,LIN), Timer2
name : UART2
description : UART2 Module
base address : 0x0
Interrupt (11) UART2_Tmr21_EINT2_Int : Interrupt node11: UART2, Timer21, EINT2
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.