\n

COMP

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection :

Registers

COMP1_CSR

COMP2_CSR


COMP1_CSR

Comparator 1 control and status register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COMP1_CSR COMP1_CSR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 COMP1_EN COMP1_PWRMODE COMP1_INMSEL COMP1_INPSEL COMP1_POLARITY COMP1_HYST COMP1_BLANKING COMP1_BRGEN COMP1_SCALEN COMP1_VALUE COMP1_LOCK

COMP1_EN : Comparator 1 enable bit
bits : 0 - 0 (1 bit)
access : read-write

COMP1_PWRMODE : Power Mode of the comparator 1
bits : 2 - 3 (2 bit)
access : read-write

COMP1_INMSEL : Comparator 1 Input Minus connection configuration bit
bits : 4 - 6 (3 bit)
access : read-write

COMP1_INPSEL : Comparator1 input plus selection bit
bits : 7 - 7 (1 bit)
access : read-write

COMP1_POLARITY : Comparator 1 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write

COMP1_HYST : Comparator 1 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write

COMP1_BLANKING : Comparator 1 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write

COMP1_BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write

COMP1_SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write

COMP1_VALUE : Comparator 1 output status bit
bits : 30 - 30 (1 bit)
access : read-only

COMP1_LOCK : COMP1_CSR register lock bit
bits : 31 - 31 (1 bit)
access : write-only


COMP2_CSR

Comparator 2 control and status register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COMP2_CSR COMP2_CSR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 COMP2_EN COMP2_PWRMODE COMP2_INMSEL COMP2_INPSEL COMP2_WINMODE COMP2_POLARITY COMP2_HYST COMP2_BLANKING COMP2_BRGEN COMP2_SCALEN COMP2_VALUE COMP2_LOCK

COMP2_EN : Comparator 2 enable bit
bits : 0 - 0 (1 bit)
access : read-write

COMP2_PWRMODE : Power Mode of the comparator 2
bits : 2 - 3 (2 bit)
access : read-write

COMP2_INMSEL : Comparator 2 Input Minus connection configuration bit
bits : 4 - 6 (3 bit)
access : read-write

COMP2_INPSEL : Comparator 2 Input Plus connection configuration bit
bits : 7 - 7 (1 bit)
access : read-write

COMP2_WINMODE : Windows mode selection bit
bits : 9 - 9 (1 bit)
access : read-write

COMP2_POLARITY : Comparator 2 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write

COMP2_HYST : Comparator 2 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write

COMP2_BLANKING : Comparator 2 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write

COMP2_BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write

COMP2_SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write

COMP2_VALUE : Comparator 2 output status bit
bits : 30 - 30 (1 bit)
access : read-only

COMP2_LOCK : COMP2_CSR register lock bit
bits : 31 - 31 (1 bit)
access : write-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.