\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection :
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TAMP1E : TAMP1E
bits : 0 - 0 (1 bit)
TAMP2E : TAMP2E
bits : 1 - 1 (1 bit)
TAMP3E : TAMP3E
bits : 2 - 2 (1 bit)
ITAMP1E : ITAMP1E
bits : 16 - 16 (1 bit)
ITAMP2E : ITAMP2E
bits : 17 - 17 (1 bit)
ITAMP3E : ITAMP3E
bits : 18 - 18 (1 bit)
ITAMP4E : ITAMP4E
bits : 19 - 19 (1 bit)
ITAMP5E : ITAMP5E
bits : 20 - 20 (1 bit)
ITAMP8E : ITAMP8E
bits : 23 - 23 (1 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TAMP1AM : TAMP1AM
bits : 0 - 0 (1 bit)
TAMP2AM : TAMP2AM
bits : 1 - 1 (1 bit)
TAMP3AM : TAMP3AM
bits : 2 - 2 (1 bit)
ATOSEL1 : ATOSEL1
bits : 8 - 9 (2 bit)
ATOSEL2 : ATOSEL2
bits : 10 - 11 (2 bit)
ATOSEL3 : ATOSEL3
bits : 12 - 13 (2 bit)
ATCKSEL : ATCKSEL
bits : 16 - 18 (3 bit)
ATPER : ATPER
bits : 24 - 26 (3 bit)
ATOSHARE : ATOSHARE
bits : 30 - 30 (1 bit)
FLTEN : FLTEN
bits : 31 - 31 (1 bit)
TAMP backup 0 register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 1 register
address_offset : 0x104 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 2 register
address_offset : 0x108 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 3 register
address_offset : 0x10C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 4 register
address_offset : 0x110 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 5 register
address_offset : 0x114 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 6 register
address_offset : 0x118 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 7 register
address_offset : 0x11C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 8 register
address_offset : 0x120 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 9 register
address_offset : 0x124 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 10 register
address_offset : 0x128 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 11 register
address_offset : 0x12C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 12 register
address_offset : 0x130 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 13 register
address_offset : 0x134 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 14 register
address_offset : 0x138 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 15 register
address_offset : 0x13C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
SEED : SEED
bits : 0 - 31 (32 bit)
TAMP backup 16 register
address_offset : 0x140 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 17 register
address_offset : 0x144 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 18 register
address_offset : 0x148 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 19 register
address_offset : 0x14C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 20 register
address_offset : 0x150 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 21 register
address_offset : 0x154 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 22 register
address_offset : 0x158 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 23 register
address_offset : 0x15C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 24 register
address_offset : 0x160 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 25 register
address_offset : 0x164 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 26 register
address_offset : 0x168 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 27 register
address_offset : 0x16C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 28 register
address_offset : 0x170 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 29 register
address_offset : 0x174 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 30 register
address_offset : 0x178 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
TAMP backup 31 register
address_offset : 0x17C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKP : BKP
bits : 0 - 31 (32 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PRNG : PRNG
bits : 0 - 7 (8 bit)
SEEDF : SEEDF
bits : 14 - 14 (1 bit)
INITS : INITS
bits : 15 - 15 (1 bit)
This register can be written only when the APB access is secure.
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BKPRWDPROT : BKPRWDPROT
bits : 0 - 7 (8 bit)
BKPWDPROT : BKPWDPROT
bits : 16 - 23 (8 bit)
TAMPDPROT : TAMPDPROT
bits : 31 - 31 (1 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TAMP1IE : TAMP1IE
bits : 0 - 0 (1 bit)
TAMP2IE : TAMP2IE
bits : 1 - 1 (1 bit)
TAMP3IE : TAMP3IE
bits : 2 - 2 (1 bit)
ITAMP1IE : ITAMP1IE
bits : 16 - 16 (1 bit)
ITAMP2IE : ITAMP2IE
bits : 17 - 17 (1 bit)
ITAMP3IE : ITAMP3IE
bits : 18 - 18 (1 bit)
ITAMP4IE : ITAMP4IE
bits : 19 - 19 (1 bit)
ITAMP5IE : ITAMP5IE
bits : 20 - 20 (1 bit)
ITAMP8IE : ITAMP8IE
bits : 23 - 23 (1 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TAMP1F : TAMP1F
bits : 0 - 0 (1 bit)
TAMP2F : TAMP2F
bits : 1 - 1 (1 bit)
TAMP3F : TAMP3F
bits : 2 - 2 (1 bit)
ITAMP1F : ITAMP1F
bits : 16 - 16 (1 bit)
ITAMP2F : ITAMP2F
bits : 17 - 17 (1 bit)
ITAMP3F : ITAMP3F
bits : 18 - 18 (1 bit)
ITAMP4F : ITAMP4F
bits : 19 - 19 (1 bit)
ITAMP5F : ITAMP5F
bits : 20 - 20 (1 bit)
ITAMP8F : ITAMP8F
bits : 23 - 23 (1 bit)
TAMP non-secure masked interrupt status register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TAMP1MF : TAMP1MF
bits : 0 - 0 (1 bit)
TAMP2MF : TAMP2MF
bits : 1 - 1 (1 bit)
TAMP3MF : TAMP3MF
bits : 2 - 2 (1 bit)
ITAMP1MF : ITAMP1MF
bits : 16 - 16 (1 bit)
ITAMP2MF : ITAMP2MF
bits : 17 - 17 (1 bit)
ITAMP3MF : ITAMP3MF
bits : 18 - 18 (1 bit)
ITAMP4MF : ITAMP4MF
bits : 19 - 19 (1 bit)
ITAMP5MF : ITAMP5MF
bits : 20 - 20 (1 bit)
ITAMP8MF : ITAMP8MF
bits : 23 - 23 (1 bit)
TAMP secure masked interrupt status register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TAMP1MF : TAMP1MF
bits : 0 - 0 (1 bit)
TAMP2MF : TAMP2MF
bits : 1 - 1 (1 bit)
TAMP3MF : TAMP3MF
bits : 2 - 2 (1 bit)
ITAMP1MF : ITAMP1MF
bits : 16 - 16 (1 bit)
ITAMP2MF : ITAMP2MF
bits : 17 - 17 (1 bit)
ITAMP3MF : ITAMP3MF
bits : 18 - 18 (1 bit)
ITAMP4MF : ITAMP4MF
bits : 19 - 19 (1 bit)
ITAMP5MF : ITAMP5MF
bits : 20 - 20 (1 bit)
ITAMP8MF : ITAMP8MF
bits : 23 - 23 (1 bit)
TAMP status clear register
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CTAMP1F : CTAMP1F
bits : 0 - 0 (1 bit)
CTAMP2F : CTAMP2F
bits : 1 - 1 (1 bit)
CTAMP3F : CTAMP3F
bits : 2 - 2 (1 bit)
CITAMP1F : CITAMP1F
bits : 16 - 16 (1 bit)
CITAMP2F : CITAMP2F
bits : 17 - 17 (1 bit)
CITAMP3F : CITAMP3F
bits : 18 - 18 (1 bit)
CITAMP4F : CITAMP4F
bits : 19 - 19 (1 bit)
CITAMP5F : CITAMP5F
bits : 20 - 20 (1 bit)
CITAMP8F : CITAMP8F
bits : 23 - 23 (1 bit)
TAMP hardware configuration register 2
address_offset : 0x3EC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
OPTIONREG_OUT : OPTIONREG_OUT
bits : 0 - 7 (8 bit)
TRUST_ZONE : TRUST_ZONE
bits : 8 - 11 (4 bit)
TAMP hardware configuration register 1
address_offset : 0x3F0 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BACKUP_REGS : BACKUP_REGS
bits : 0 - 7 (8 bit)
TAMPER : TAMPER
bits : 8 - 11 (4 bit)
ACTIVE_TAMPER : ACTIVE_TAMPER
bits : 12 - 15 (4 bit)
INT_TAMPER : INT_TAMPER
bits : 16 - 31 (16 bit)
TAMP version register
address_offset : 0x3F4 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
MINREV : MINREV
bits : 0 - 3 (4 bit)
MAJREV : MAJREV
bits : 4 - 7 (4 bit)
TAMP identification register
address_offset : 0x3F8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ID : ID
bits : 0 - 31 (32 bit)
TAMP size identification register
address_offset : 0x3FC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SID : SID
bits : 0 - 31 (32 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TAMP1NOER : TAMP1NOER
bits : 0 - 0 (1 bit)
TAMP2NOER : TAMP2NOER
bits : 1 - 1 (1 bit)
TAMP3NOER : TAMP3NOER
bits : 2 - 2 (1 bit)
TAMP1MSK : TAMP1MSK
bits : 16 - 16 (1 bit)
TAMP2MSK : TAMP2MSK
bits : 17 - 17 (1 bit)
TAMP3MSK : TAMP3MSK
bits : 18 - 18 (1 bit)
TAMP1TRG : TAMP1TRG
bits : 24 - 24 (1 bit)
TAMP2TRG : TAMP2TRG
bits : 25 - 25 (1 bit)
TAMP3TRG : TAMP3TRG
bits : 26 - 26 (1 bit)
TAMP monotonic counter register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
COUNT : COUNT
bits : 0 - 31 (32 bit)
TAMP configuration register
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUT3_RMP : OUT3_RMP
bits : 0 - 0 (1 bit)
This register can be protected against non-secure access. Refer to Section51.3.3: TAMP secure protection modes.
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TAMPFREQ : TAMPFREQ
bits : 0 - 2 (3 bit)
TAMPFLT : TAMPFLT
bits : 3 - 4 (2 bit)
TAMPPRCH : TAMPPRCH
bits : 5 - 6 (2 bit)
TAMPPUDIS : TAMPPUDIS
bits : 7 - 7 (1 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.