\n
address_offset : 0x0 Bytes (0x0)
size : 0x9 byte (0x0)
mem_usage : registers
protection :
Comparator control and status register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP1_EN : Comparator enable
bits : 0 - 0 (1 bit)
access : read-write
COMP1_PWRMODE : Comparator power mode
bits : 2 - 3 (2 bit)
access : read-write
COMP1_INMSEL : Comparator input minus selection
bits : 4 - 6 (3 bit)
access : read-write
COMP1_INPSEL : Comparator input plus selection
bits : 7 - 8 (2 bit)
access : read-write
COMP1_POLARITY : Comparator output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP1_HYST : Comparator hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP1_BLANKING : Comparator blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP1_BRGEN : Comparator voltage scaler enable
bits : 22 - 22 (1 bit)
access : read-write
COMP1_SCALEN : Comparator scaler bridge enable
bits : 23 - 23 (1 bit)
access : read-write
COMP1_INMESEL : Comparator input minus extended selection
bits : 25 - 26 (2 bit)
access : read-write
COMP1_VALUE : Comparator output level
bits : 30 - 30 (1 bit)
access : read-only
COMP1_LOCK : Comparator lock
bits : 31 - 31 (1 bit)
access : read-write
Comparator 2 control and status register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP2_EN : Comparator 2 enable bit
bits : 0 - 0 (1 bit)
access : read-write
COMP2_PWRMODE : Power Mode of the comparator 2
bits : 2 - 3 (2 bit)
access : read-write
COMP2_INMSEL : Comparator 2 input minus selection bits
bits : 4 - 5 (2 bit)
access : read-write
COMP2_INPSEL : Comparator 1 input plus selection bit
bits : 7 - 8 (2 bit)
access : read-write
COMP2_WINMODE : Windows mode selection bit
bits : 9 - 9 (1 bit)
access : read-write
COMP2_POLARITY : Comparator 2 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write
COMP2_HYST : Comparator 2 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write
COMP2_BLANKING : Comparator 2 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write
COMP2_BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write
COMP2_SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write
COMP2_INMESEL : comparator 2 input minus extended selection bits.
bits : 25 - 26 (2 bit)
access : read-write
COMP2_VALUE : Comparator 2 output status bit
bits : 30 - 30 (1 bit)
access : read-only
COMP2_LOCK : CSR register lock bit
bits : 31 - 31 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.