\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection :
COMP1_CSR
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Comparator 1 enable bit
bits : 0 - 0 (1 bit)
access : read-write
PWRMODE : Power Mode of the comparator 1
bits : 2 - 3 (2 bit)
access : read-write
INMSEL : Comparator 1 input minus selection bits
bits : 4 - 6 (3 bit)
access : read-write
INPSEL : Comparator1 input plus selection bit
bits : 7 - 8 (2 bit)
access : read-write
POLARITY : Comparator 1 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write
HYST : Comparator 1 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write
BLANKING : Comparator 1 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write
BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write
SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write
INMESEL : comparator 1 input minus extended selection bits.
bits : 25 - 26 (2 bit)
access : read-write
VALUE : Comparator 1 output status bit
bits : 30 - 30 (1 bit)
access : read-only
LOCK : COMP1_CSR register lock bit
bits : 31 - 31 (1 bit)
access : read-write
COMP2_CSR
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : Comparator 2 enable bit
bits : 0 - 0 (1 bit)
access : read-write
PWRMODE : Power Mode of the comparator 2
bits : 2 - 3 (2 bit)
access : read-write
INMSEL : Comparator 2 input minus selection bits
bits : 4 - 6 (3 bit)
access : read-write
INPSEL : Comparator 1 input plus selection bit
bits : 7 - 8 (2 bit)
access : read-write
WINMODE : Windows mode selection bit
bits : 9 - 9 (1 bit)
access : read-write
POLARITY : Comparator 2 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write
HYST : Comparator 2 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write
BLANKING : Comparator 2 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write
BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write
SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write
INMESEL : comparator 2 input minus extended selection bits.
bits : 25 - 26 (2 bit)
access : read-write
VALUE : Comparator 2 output status bit
bits : 30 - 30 (1 bit)
access : read-only
LOCK : CSR register lock bit
bits : 31 - 31 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.