\n

COMP

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection :

Registers

COMP1_CSR

COMP2_CSR


COMP1_CSR

COMP1_CSR
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COMP1_CSR COMP1_CSR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 EN PWRMODE INMSEL INPSEL POLARITY HYST BLANKING BRGEN SCALEN INMESEL VALUE LOCK

EN : Comparator 1 enable bit
bits : 0 - 0 (1 bit)
access : read-write

PWRMODE : Power Mode of the comparator 1
bits : 2 - 3 (2 bit)
access : read-write

INMSEL : Comparator 1 input minus selection bits
bits : 4 - 6 (3 bit)
access : read-write

INPSEL : Comparator1 input plus selection bit
bits : 7 - 8 (2 bit)
access : read-write

POLARITY : Comparator 1 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write

HYST : Comparator 1 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write

BLANKING : Comparator 1 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write

BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write

SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write

INMESEL : comparator 1 input minus extended selection bits.
bits : 25 - 26 (2 bit)
access : read-write

VALUE : Comparator 1 output status bit
bits : 30 - 30 (1 bit)
access : read-only

LOCK : COMP1_CSR register lock bit
bits : 31 - 31 (1 bit)
access : read-write


COMP2_CSR

COMP2_CSR
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

COMP2_CSR COMP2_CSR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 EN PWRMODE INMSEL INPSEL WINMODE POLARITY HYST BLANKING BRGEN SCALEN INMESEL VALUE LOCK

EN : Comparator 2 enable bit
bits : 0 - 0 (1 bit)
access : read-write

PWRMODE : Power Mode of the comparator 2
bits : 2 - 3 (2 bit)
access : read-write

INMSEL : Comparator 2 input minus selection bits
bits : 4 - 6 (3 bit)
access : read-write

INPSEL : Comparator 1 input plus selection bit
bits : 7 - 8 (2 bit)
access : read-write

WINMODE : Windows mode selection bit
bits : 9 - 9 (1 bit)
access : read-write

POLARITY : Comparator 2 polarity selection bit
bits : 15 - 15 (1 bit)
access : read-write

HYST : Comparator 2 hysteresis selection bits
bits : 16 - 17 (2 bit)
access : read-write

BLANKING : Comparator 2 blanking source selection bits
bits : 18 - 20 (3 bit)
access : read-write

BRGEN : Scaler bridge enable
bits : 22 - 22 (1 bit)
access : read-write

SCALEN : Voltage scaler enable bit
bits : 23 - 23 (1 bit)
access : read-write

INMESEL : comparator 2 input minus extended selection bits.
bits : 25 - 26 (2 bit)
access : read-write

VALUE : Comparator 2 output status bit
bits : 30 - 30 (1 bit)
access : read-only

LOCK : CSR register lock bit
bits : 31 - 31 (1 bit)
access : read-write



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.