\n
address_offset : 0x0 Bytes (0x0)
size : 0x50 byte (0x0)
mem_usage : registers
protection :
Flash Control Set Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
OPSTART : OPSTART
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
PROGEN : PROGEN
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
PAGEEN : PAGEEN
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
BOOTKEYEN : BOOTKEYEN
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
USR1KEYEN : USR1KEYEN
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
USR2KEYEN : USR2KEYEN
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
Flash Address Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash Data Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash feed Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Interrupt Enable Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMPINTEN : Complete Operation Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
PROTINTEN : Protect Interrupt Enable
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
ERRINTEN : Error Interrupt Enable
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Flash Interrupt Status Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
COMPLETE : Complete Operation Status
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
PROTECT : Protect Interrupt Status
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
ERROR : Error Interrupt Status
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
Flash Interrupt Clear Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
COMPCLR : Complete Operation Clear
bits : 0 - 0 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
PROTCLR : Protect Interrupt Clear
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
ERRORCLR : Error Interrupt Clear
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
Flash Status Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BOOTPAREN : BOOT partition Status
bits : 8 - 8 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR1PAREN : USR1 partition Status
bits : 9 - 9 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR2PAREN : USR1 partition Status
bits : 10 - 10 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
BOOTKEYOK : BOOT key matching Status
bits : 16 - 16 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR1KEYOK : USR1 key matching Status
bits : 17 - 17 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR2KEYOK : USR2 key matching Status
bits : 18 - 18 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
BOOTCRCOK : BOOT partition CRC check Status
bits : 24 - 24 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR1CRCOK : USR1 partition CRC check Status
bits : 25 - 25 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR2CRCOK : USR2 partition CRC check Status
bits : 26 - 26 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
Flash Key1 Match Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key2 Match Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key3 Match Register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key4 Match Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
BOOT Partition address information Register
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
STADDR : Complete Operation Clear
bits : 0 - 15 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
EDADDR : Protect Interrupt Clear
bits : 16 - 31 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
Flash Control Clear Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PROGEN : PROGEN
bits : 1 - 1 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
PAGEEN : PAGEEN
bits : 2 - 2 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
BOOTKEYEN : BOOTKEYEN
bits : 3 - 3 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
USR1KEYEN : USR1KEYEN
bits : 4 - 4 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
USR2KEYEN : USR2KEYEN
bits : 5 - 5 (1 bit)
access : write-only
Enumeration:
End of enumeration elements list.
User1 Partition address information Register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
STADDR : Complete Operation Clear
bits : 0 - 15 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
EDADDR : Protect Interrupt Clear
bits : 16 - 31 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
User2 Partition address information Register
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
STADDR : Complete Operation Clear
bits : 0 - 15 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
EDADDR : Protect Interrupt Clear
bits : 16 - 31 (16 bit)
access : read-only
Enumeration:
End of enumeration elements list.
Flash Control Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROGEN : PROGEN
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
PAGEEN : PAGEEN
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
BOOTKEYEN : BOOTKEYEN
bits : 3 - 3 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR1KEYEN : USR1KEYEN
bits : 4 - 4 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
USR2KEYEN : USR2KEYEN
bits : 5 - 5 (1 bit)
access : read-only
Enumeration:
End of enumeration elements list.
Flash Configure Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
READCFG : READCFG
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
End of enumeration elements list.
PREFETCHEN : PREFETCHEN
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.